RingLift — Can Pull Assist
Created 3 months ago
Description
Introducing RingLift, an ergonomic lever tool designed to make popping open canned goods completely effortless. Getting right into a fresh can of beans shouldn't cost a manicure or require straining your grip. This tool features a specially designed thin, sloped wedge tip that slides smoothly under standard ring pulls, backed by a robust barrel handle with finger grip ribs to provide excellent leverage.
Features
- Accessibility Focused: Takes the physical strain off fingers and nails.
- Ergonomic Barrel Handle: A 25mm thick, ribbed handle maximizes rotational grip power.
- Tapered Hook Tip: Slopes down to a 2mm tip to easily slide onto tightly sealed pull-rings.
- Support-Free Design: Built with a flat-bottomed geometry so it prints reliably without the need for support materials.
Dimensions
- Total Length: 90mm
- Handle Width: 25mm
- Tip Thickness: 2mm at the leading edge
Images
More like this
Explore more in Kitchen & Bathroom →
Obsidian — Ribbed Can Cooler with Handle
Obsidian is a matte-black-ready can cooler for standard 330 ml cans, with a reinforced side handle, diagonal grip ribs and a flat front panel reserved for names or logos. The handle opening has a peaked top so it prints upright without supports. Dimensions Inside diameter: 68 mm Inside height: 105 mm (above a 3 mm base) Wall: 2 mm, base: 3 mm Overall height: 108 mm; footprint about 115 × 74 mm including handle and panel Features Diagonal ribs outside, perfectly smooth bore inside Rounded top rim Broad, rounded handle, 24 mm wide Flat front panel, 40 × 66 mm Print notes Print upright, base on the plate, PETG, 0.4 mm nozzle, 0.2 mm layers No supports expected; fits a 180 mm build volume
Toy Story Sky Cloud Cookie Cutter
A cookie cutter echoing the wallpaper clouds from Andy's room: a big bump on the upper left, smaller puffs along the top and a long flat base. The centre is open so dough passes straight through. 15 mm tall wall, about 1.2 mm thick, thin clean cutting edge on the flat bottom Widened rim at the top for pressing by hand About 100 mm wide, prints flat with no supports
Three-Slot Curved Taco Stand
A taco stand that holds three shells upright and open-side up, so fillings stay in place while you load them. The base is a flat 180 × 120 mm block with rounded corners. Three curved slots are cut into it, each one cradling a single shell. Four round feet lift the base off the table. Each slot arcs along its length, which follows the curve of a folded shell. Three curved slots, each 90 mm long and 20 mm wide Slots spaced 55 mm apart across the 180 mm base Base 22 mm thick, with the slot floor 6 mm above the underside of the block Four round feet, 5 mm tall, with chamfered edges Rounded vertical corners on the base Prints flat on its feet, with no supports needed If your shells are wider than 20 mm, widen the slots before printing. Food-safe filament such as PETG is a sensible choice, and a wipe-down after use keeps it clean.
GlideTrak — Under-Shelf Stemware Rack
GlideTrak is an under-shelf stemware storage block designed to securely hold up to four standard wine glasses upside down by their stems. The dual-channel architecture features a continuous track that flares wide at the opening, allowing smooth, one-handed retrieval and stowing of glasses without requiring precise visual alignment. Engineered as a robust mounting block, it secures flush against the underside of a cabinet while maintaining a clean profile. Features Flared Entry: The stem slot narrows from a 14 mm flared opening down to a 9 mm continuous track, guiding standard stems seamlessly into place. Concealed Mounting: Six countersunk holes with screwdriver access tunnels provide secure upward mounting, hiding the screw heads deep within the block. Support-Free Printing: Engineered to be printed standing vertically on its flat back wall, allowing the internal cavities to form cleanly without the need for support material. Dimensions Overall Footprint: 212 mm wide × 170 mm deep × 22 mm thick. Base Clearance: 82 mm wide internal cavity per channel to accommodate standard glass bases. Stem Track: 9 mm track width, expanding to a 14 mm flare at the front entry.
Ridged Cutlery Grip Sleeve
A chunky, ridged sleeve designed to slide over standard fork and spoon handles, expanding their overall diameter. It provides a more substantial holding surface for individuals with limited hand strength, reducing the exertion required during meals. 30mm outer diameter with a fluted exterior for a secure hold 100mm overall length fits securely across the palm 12x4mm center slot accommodates most flat, stamped cutlery handles Soft-cornered bore grips the flatware to prevent spinning under load
Vented Snap-On Toothbrush Cover
A slide-on travel cover designed to enclose the head of a standard adult toothbrush. Protects bristles from crushing and external contact during transit, while the top-face perforations allow airflow so the brush can dry between uses. The base incorporates side-relief slits and internal retention bumps to snap securely over the neck of the brush, holding the cover in place in a travel bag. Interior cavity measures 26 mm wide, 16 mm deep, and 33 mm tall Vented top allows passive moisture escape Flex-slit base expands to accommodate varying handle tapers Snap-fit retention bumps grip the brush neck