Schlüsselanhänger paula
Created today
Description
Schlüsselanhänger mit Namen Paula, bei dem die Schrift nicht flach untergeht: Sie steht 0,5 mm erhaben auf der Platte und lässt sich mit dem Finger ertasten. Das Kettenloch sitzt seitlich, damit der Ring nicht über die Buchstaben schleift.
- Platte: 30 × 14 × 2 mm, Ecken mit 3 mm abgerundet
- Schrift: „Paula“ in Lobster, 0,5 mm erhaben
- Kettenloch: 3,5 mm Durchmesser, linke Seite
- Druck: flach auf der Platte, ohne Stützen, 0,2 mm Schichthöhe empfohlen
Images
More like this
Explore more in Keychains & EDC →
Sleutelhanger Elisabeth, Courgette, 62 mm
Sleutelhanger met de naam "Elisabeth" in Courgette-letters, bedoeld voor een standaard sleutelring. Eén stuk, in één kleur te printen. Voor het printen controleren Breedte van de naam: 62 mm, plus de rand ongeveer 70 mm. Gat in het oogje: 4,5 mm, geschikt voor een gewone sleutelring. Een dikkere ring past niet. Dikte: 2 mm ondergrond, letters 3,2 mm hoog. Past niet bij Karabijnhaken met een dikke ogen of brede band. Het gat is te klein.
Stacked Name Keychain Pendant
A black keychain pendant with bold white stacked lettering reading Nodi / Mani / Yani and a small red heart beside the last line. The loop sits above the N. Remix hooks Loop position: centred at about X 2, Y 33 with a 9 mm outer and 4.5 mm hole. Shift it or enlarge the outer diameter for a stronger ring. Heart gap: the heart sits about 1 mm clear of the final letter. Change its X offset (34.2) to adjust spacing. Layer heights: 3 mm black base, 2 mm raised white lettering and red heart, 5 mm total. Font: Archivo Black at 8.5 mm; swap for a rounder face for a softer look. Pairs with: a split ring or small carabiner; assign black, white and red to separate AMS filaments.
Pion Trivial Pursuit 26 mm, 6 camemberts
Support de pion rond de 26 mm de diamètre avec 6 logements en secteur, accompagné de 6 camemberts (secteurs de 60°) à insérer dans les logements. Les pièces s'impriment séparément, à plat. Support : diamètre 26 mm, hauteur 6 mm, fond 2 mm, logements de 4 mm de profondeur Cloisons entre logements : 1,2 mm Camemberts : 6 pièces, hauteur 3,5 mm, avec un plot de préhension de 1,5 mm Jeu d'insertion : 0,25 mm par côté Matériau conseillé : PLA ou PETG, une couleur par camembert
Stitch Head Bead With Ears
A round Stitch-style head bead with two pointed ears, a lighter face patch, eyes and a nose, threaded by a vertical hole for cord or wire. Remix hooks Head size: the head radius is 13 mm (26 mm across). Scale it down for jewelry-sized beads; keep the hole at 3.5 mm or larger for cord. Hole diameter: 3.5 mm runs top to bottom between the ears. Widen it for paracord or narrow it for thin elastic. Ear angle and length: ears are about 21 mm long, splayed 55° outward. Lower the angle for droopy ears, or shorten them for a chunkier keychain bead. Colours: the head, face patch, inner ears and eyes are separate regions, so they suit multicolour printing with filament swaps. Pairs with: plain round spacer beads, a keyring clasp, or a row of beads for a bag charm.
Indian Number Plate Keychain HR82 6791
A rectangular Indian-style number plate keychain with the registration HR82 6791 in raised black letters on a white plate. 70 × 20 mm plate, 3 mm thick, with rounded corners Text raised 0.75 mm for clean printing with a 0.4 mm nozzle 4 mm ring hole on the left side Flat back, no supports needed Single connected piece, white base with black text
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.