Screw-Through Dowel Shelf Bracket
Created today
Description
A two-part wall bracket for holding a 13 mm wooden dowel, intended as a filament spool shelf. A narrow wall plate carries a ledge that takes the vertical load, and a separate flat-printed arm rests on that ledge.
One screw passes through the arm's back flange and the wall plate into the wall, locking the two parts together. The screw head sits in a recess in the arm.
- Wall plate: 24 mm wide, 84 mm tall, with a ribbed ledge under the arm
- Arm: 12 mm thick, printed on its side with no supports
- Dowel hole: 13.6 mm, 150 mm out from the wall plate
- Fixing: one screw near the top, shared by both parts
- Print two sets for a pair of brackets
Images
More like this
Explore more in Storage & Organization →
150mm Borg Friendship Vault
Zak's Borg Friendship Vault. Three-piece print, designed to drop in and seat clean without fasteners. Overall Footprint: 150mm x 150mm. Total Height (Assembled): 145mm. Internal Payload Bore: 65mm diameter x 105mm depth. Cage Windows: 90mm span, designed to bridge flat across the top without support on well-calibrated machines. The top cap runs a 118mm square boss to locate itself on the outer frame, plus a 64.5mm cylindrical plug to lock into the core and prevent horizontal slop. Print the outer cage and cap in black PETG; run the core in fluorescent PLA. Keep your cooling aggressive for the long window bridges.
130mm Tubeless Repair Kit Case
A rigid three-piece storage case designed for tubeless tyre repair kits. The base features an inset lip that locks the lid in place, secured by a snap-fit C-clamp latch that mounts to an integrated front axle. Dimensions: 130 mm x 85 mm x 35 mm combined. Wall Thickness: 2.5 mm throughout. Clearances: 0.3 mm on the lid slip-fit, 0.5 mm width clearance for the latch. Print Orientation: All three pieces are laid flat on the bed. No supports required.
4-Compartment Kitchen Organizer
A small, straightforward drawer organizer divided into four compartments. One wide compartment runs the length of the tray for standard utensils, while the back half is split into three smaller bays for loose items. Dimensions Overall size: 150 mm long × 100 mm wide × 35 mm tall Wall thickness: 2 mm solid walls and dividers Long bay: ~146 mm × 47 mm (ideal for small spoons or forks) Small bays: ~47 mm × 47 mm each Print notes Designed to print flat on its base without supports. Generous corner radii keep things from getting stuck in the corners. PLA or PETG both work fine for drawer use.
Clinical Grid Pill Tray
A low-profile organization block built to corral ten standard pill bottles, holding them secure and upright in a compact footprint. The regimented 2x5 layout keeps labels visible and eliminates cabinet clutter, turning a jumble of loose vials into an orderly station. Design Notes Capacity: 10 standard slots (2x5 grid). Clearance: 35mm diameter pockets, sized for standard modern pharmacy bottles. Details: Top edges of each pocket are slightly flared to guide bottles smoothly into place. Printability: Flat base, prints perfectly without supports.
Stash Box With Rolling Groove2
A stash box dimensioned precisely to 6" x 4" x 2". The lid features an inner alignment flange for a secure slip-fit when closed. When removed and inverted, the lid acts as a functional tray, featuring a solid raised block with a 130mm long V-notch engineered into the center to cradle rolling papers. Dimensions Overall Box Size: 152.4mm x 101.6mm x 50.8mm (6" x 4" x 2") V-Notch Length: 130mm (accommodates standard and king-size papers) Wall Thickness: 2mm throughout the base Print Notes Both parts are oriented flat on the build plate in their optimal printing positions. The V-notch prints perfectly without supports due to its self-supporting 45-degree overhang geometry. A 0.6mm clearance tolerance is built into the lid lip to allow smooth opening and closing right off the printer.
Endgame Robotics Enclosure
A rugged, multi-part enclosure designed for robotic interfaces and smart control nodes. The three-piece split allows easy assembly, with a deep main chassis to house microcontrollers and batteries, capped by a clean windowed bezel and a vented back cover. Front Bezel: Features a recessed touch panel land and tiny microphone breakout holes. Main Chassis: Houses dual text debossing ("END" / "GAME"), structural columns for heat-set inserts, and a USB-C cutout. Back Cover: Includes countersunk M3 mounting holes, an expansion module bay, and a hexagonal vent grille.