Sloped Hexagonal Dice Tray
Created 1 months ago
Description
A hexagonal rolling tray designed to keep dice contained and flat. The 25mm outer walls are sized to prevent standard 20-sided dice from escaping during active rolls. The interior walls slope inward toward the base, preventing dice from resting at unreadable angles against the edges and forcing them to tumble back into the centre.
Key dimensions:
- 180mm overall width, fitting standard build plates
- 25mm overall wall height
- 3mm solid base thickness
- Inwardly sloped interior to bounce dice back to the rolling surface
Images
More like this
Explore more in Desk & Tech →
Slotted Under-Desk Cable Tray
What it's for Designed to mount directly to the underside of a desk to hold a power strip and bundle loose cables, clearing floor hazards. The open U-channel features vertical slots along both long edges, allowing cables to drop in from above and providing anchor points for hook-and-loop straps to lash down the strip. Prints flat on its back without supports. Dimensions Overall footprint: 350 x 100 x 60 mm Inner channel capacity: 350 x 64 x 57 mm Cable slots: 8 mm wide, 45 mm deep, spaced at 35 mm intervals Mounting: 10 countersunk screw holes positioned along the outer flanges Remix ideas Adjust the overall length to match specific power strips or desk spans. Widen the side slots to accommodate heavy-gauge monitor cables or display connectors. Increase the wall thickness to support heavier power supplies and transformers.
Folding Flat-Pack Name Tag
A print-in-place desk plate that prints entirely flat and features an integrated hinged kickstand. Designed for easy setup, the outer frame swings backward to form a stable tripod base. Features of this design: Print-in-place captive hinge mechanism with a 0.4mm tolerance Heavyweight 4mm main card thickness for rigidity Recessed nested geometry allowing it to collapse back into a single flat sheet Embossed typography using Archivo Black for high legibility
Vision Scale Control Box
A structured, dual-bay hardware enclosure tailored to house both an ESP32-CAM and an HX711 load cell amplifier. Built with a unified form factor to keep a vision-based smart scale or sensor node tidy, this shell manages the boards, wiring, and thermal exhaust in one place. Internal Layout: Features independent standoff patterns spaced for standard ESP32-CAM and HX711 module footprints. FDM Optimized: Horizontal ventilation tracks on the side walls print cleanly without supports. Cable Management: Drop-in U-slots on either end allow cables to be seated before securing the lid, avoiding tricky wire threading. Hardware Required: Fits standard M3 self-tapping screws for the lid, and features built-in outer flanges for securing to a bench or wall.
Pebble Dock — EDC Organiser
Pebble Dock brings order to your nightstand with a heavy, stable, monolithic footprint. The phone sits securely against a rigid 38mm backrest angled at 70 degrees, with an 8mm front retaining lip and an integrated hidden cable channel for neat charging. Features Rigid Backrest: A deeply recessed pocket securely supports a cased smartphone. Hidden Cable Channel: Cables feed directly from beneath the phone to the rear of the body, keeping the surface clear. Essential Trays: A front catch-all for daily carries and a side pocket for earbuds. Support-free: The solid base and rounded profile print cleanly directly on the bed.
25mm Desk Edge Cable Clip
A rigid 4-slot cable clip profiled to seat directly onto a standard 25mm desk edge. The upper block features four 7mm circular channels to corral anything from USB cables to heavy power leads, utilizing a 5mm snap-in neck and flared entry lips to retain them once seated. Fitment Checklist Host Desk Thickness: 25.0mm exactly. The mounting bore incorporates dual 1mm tension bumps on the bottom face to grip the surface. Measure the board with calipers before printing; standard one-inch stock will seat tight, but the clip will not force over thicker material. Cable Capacity: Four 7mm bores. The 5mm entry neck requires slight cable jacket compression for insertion. Incompatibilities: Will not seat correctly on desks with deep edge bevels, metal trim bands, or severe rounded profiles.
Aix — iPhone 16 Shell
Aix — a minimal, precise protective shell engineered for the standard iPhone 16. Designed with generous button and port cutouts to ensure full tactile access to the new Camera Control and Action buttons without sacrificing corner protection. Design Details Fitment: Sized precisely for the 147.6 x 71.6 mm iPhone 16 chassis. Cutouts: Features full-clearance openings for the pill-shaped camera bump, USB-C port, and all side buttons. Lip: A subtle 1mm front overhang keeps the screen off flat surfaces when laid face-down. Print Notes Intended for TPU or flexible filaments to allow the phone to snap past the front lip. Print face-down (or back-down with supports for the lip) depending on your bridging confidence.