Sloped Power Box Enclosure v2
Created 1 months ago
Description
A sloped-console enclosure for a custom battery power box.
The case features a sloped front panel for mounting a DSN-VC288 volt/amp meter and a generic battery level indicator, positioning them at an ergonomic viewing angle.
- Outputs: Four 14 mm barrel jacks on the front panel.
- Inputs: One 14 mm barrel jack and a 17×12 mm power switch cutout on the rear.
- Internals: A segregated 70×60 mm battery compartment with retaining walls.
- Assembly: Four M3 corner bosses meant for heat-set inserts, securing a drop-on top plate.
Images
More like this
Explore more in Automotive, RC & Hobby →
High-Walled Mammal Litter Box
A heavy-duty, high-walled litter enclosure designed for small mammals. The solid base limits scattered bedding, while the dropped, U-shaped front entry provides easy access. The entire perimeter—both the upper walls and the entryway lip—is finished with a full-radius bead to eliminate sharp edges and ensure comfort. Dimensions: 220mm x 160mm x 100mm Entry Height: 25mm from the floor Wall Thickness: 4mm solid perimeter Edge Treatment: 20mm internal radiused corners, full round top rim
Double Seatbelt Buckle Holder, Backseat
Two seatbelt buckles flop around and fall into the seat gap, so this holder stands both upright side by side in the backseat of a Toyota Sienta. Each 33 x 53 mm pocket goes straight through the base, so the buckle and webbing pass through with nothing blocking the bottom. Pocket size: 33 x 53 mm each, sized for a 31 x 51 mm buckle Sleeve height: 28 mm above a 6 mm base Overall footprint: 130 x 64 mm Centre screw hole: 4.5 mm Print flat on the base, no supports needed
Janome RE10B Hoop Frame
A stripped-down, standalone frame replica for the Janome RE10B embroidery hoop. This is purely the central retaining ring with all machine-mounting hardware, tabs, and locking screws removed, leaving a clean, continuous loop. Dimensions Inner Opening: 100 mm × 40 mm Outer Envelope: 112 mm × 52 mm Depth: 7 mm Verify the 100x40 mm inner bore before printing to ensure your fabric setup will fit correctly. The edges are filleted vertically to recreate the capsule-like profile of the original part.
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
67mm Lens Cap Strap Clip
Pinching off a lens cap and immediately dropping it in the dirt is an avoidable mistake. This clip mounts directly to a camera strap to hold a 67mm pinch cap securely while the lens is in use, keeping it out of your pockets and off the ground. Strap slot: 42mm wide with a 3.2mm clearance and a diagonal slip-channel, letting it twist onto the webbing without unthreading the strap. Cap receiver: 67.5mm internal groove catches the cap's pinch prongs, with an angled lip to lock them in place. Tether loop: 6mm bore on the side to run a backup paracord lanyard. Print orientation: Internal overhangs are angled to print support-free when placed face-up on the plate.
Captive Tire Deflator
A two-piece threaded cap and deflator button for standard Schrader valves, designed to bleed tire pressure without needing a separate tool. The hex-bodied cap threads securely onto the valve stem while housing a captive push-button mechanism. Assembly Drop-in fit: The plunger is designed to be dropped into the open bottom of the cap before threading it onto the tire. Captive design: Once screwed onto the valve, the tire stem itself traps the flange of the plunger against the ceiling of the cap, keeping it permanently secured. Print orientation: Both pieces sit completely flat on the build plate, needing no supports or brim to print cleanly.