Description
A perfectly smooth, low-profile slate measuring exactly 80 by 110 millimeters. With its generously rounded corners, this piece serves as an ideal minimalist foundation—ready to be drilled, stacked, or used exactly as it is.
Blank Canvas Potential
- Project Base: A perfect footprint for custom enclosures.
- Spacer: Easily scaled on the Z-axis for custom clearances.
- Coaster: Sized neatly for an oversized mug or desk planter.
Images
More like this
Explore more in Desk & Tech →
Aura — Minimalist Frame Stand
A minimalist, Scandinavian-inspired phone stand designed to strip away visual bulk while maintaining perfect stability. The aggressive, blocky wedge has been replaced by a light, flowing frame that relies on deep curves and negative space. Features Floating Frame: A wide central cutout reduces the structure to two elegant, 8mm sweeping rails. Organic Silhouette: Deeply rounded outer corners mimic the look of bent plywood or softened aluminum. Maintained Utility: Keeps the exact 45-degree viewing angle and the elongated footprint to fully support larger phones without tipping.
8-Slot PC Cable Comb
A rigid 8-slot cable comb designed to flatten out chaotic PC cable bundles. Spaced precisely for standard 18AWG PSU wires, it includes mounting flanges on either side to pin the whole run tight against a case wall or back panel. Remix Variables Channel Dimensions: Currently set to a 3.5mm width on a 4.5mm pitch. Expand the width to 4mm or higher if you are working with thick sleeved cables. Slot Count: Built for an 8-pin run (like a GPU or EPS cable). Extending the pattern to 24 slots for a 24-pin motherboard main power cable is a straightforward parameter update. Mounting Hardware: The end flanges are drilled for M3 screws with a simple countersink. These can easily be scaled for M4 hardware or removed entirely if you prefer mounting with double-sided tape.
Raspberry Pi Pico Shell
Raspberry Pi Pico enclosure designed for the standard 51x21mm board footprint. It fits the Pico 1, Pico W, Pico 2, and Pico 2 W natively. The top shell includes pass-through slots at standard 0.7-inch pitch to clear upward-facing headers, alongside a thumb-cut for the BOOTSEL button and a Micro-USB trench on the base. Fitment Notes Mounting Interface: Drops onto four 1.5mm standoffs matching the factory 47x17mm hole pattern. Hardware: Requires four M2 self-tapping screws (or M2x8 machine screws) for the corners. Incompatibilities: Does not fit stretched third-party clone boards (e.g., 53mm lengths) or boards with downward-facing headers soldered for breadboard use.
Index Card Desk Sign
A minimalist desktop stand that holds a standard 4x6-inch index card in landscape orientation. The frame is tilted back at 15 degrees for optimal reading from a seated position, and features an open-top U-shape slot so cards can be dropped in or swapped out instantly. No Supports Required: Prints perfectly flat on its base, with the frame angled to avoid steep overhangs on the inner cavity. Drop-In Fit: Sized at 154mm x 103mm internally to easily accommodate standard and slightly oversized cards. 4mm Retaining Lip: Overlaps the bottom and sides of the card just enough to hold it flat without covering your text.
Support-Free Dual Stream Deck Stand
A heavy-duty desk stand built to hold two original 15-key Elgato Stream Decks side by side at a 70-degree angle. The deep footprint resists tipping when you press the top row of keys, and the built-in cable routing channels handle the non-detachable USB cords cleanly. Features Support-Free Channels: The internal cable routing has been modified with peaked V-shape ceilings, eliminating flat overhangs so it prints flat on the bed without any support material. Dual Routing: Each device gets its own recessed top channel leading into an oversized main pass-through and a vertical drop out the back. Solid Base: Prints as one continuous block, 250mm wide, designed to sit firmly on the desk.