Solar-Carapace Wall Crawler
Created 1 months ago
Description
This biomimetic robotic crawler marries the low-slung, wall-hugging geometry of a gecko with the armored, rounded carapace of a beetle. Designed to look as though it was cobbled together from reclaimed agricultural machinery and weathered copper, it features six multi-jointed legs terminating in wide, splayed adhesive pads. The creature's back is layered with overlapping, flexible solar arrays to gather power while it suns itself on high, vertical surfaces.
Design Features
- Biomimetic Chassis: A smooth, elongated core that mimics a beetle's natural armor.
- Gecko Pads: Oversized, flattened footpads meant to evoke dry-adhesion micro-structures.
- Solar Plating: Three distinct, overlapping dorsal plates with ridged solar cell textures.
- Sensor Optics: Pronounced, bulbous copper "eyes" set wide for maximum peripheral data collection.
Images
More like this
Explore more in Decor & Display →
Ancient Temple Reptile Hide
A geometric, floorless hideout designed for small reptiles, shaped like an ancient stepped pyramid. It features two arched entryways to prevent the animal from feeling cornered and a built-in side altar that holds a perfectly fitted, drop-in water dish. The tiered shape isn't just aesthetic—it prints cleanly without any supports, and gives climbing species a textured surface to explore. Every exposed edge inside and out is lightly rounded to keep delicate scales safe, and the custom water bowl has a smoothed interior so you can wipe it out easily. Remixing and Sizing This design is built for standard enclosures and easy FDM printing, but scales predictably if you need to adjust it: Total Footprint: 210mm wide (including the altar) by 150mm deep, hitting right around the 8-inch mark. Hide Interior: Roughly 152mm x 142mm at the base, stepping inwards. Entrances: 45mm wide and 40mm tall—ideal for leopard geckos, smaller snakes, or juvenile beardies. Scale the whole model up uniformly if you have a larger animal. Water Bowl: 73mm diameter, holding about 70ml. If you lose it, the recess on the temple is exactly 75mm wide and 20mm deep, which easily fits a standard small deli cup or bottle cap depending on your scale.
Reeded Table Lamp
A modern reeded table lamp designed to stand independently on a desk, nightstand, or cabinet. The design has been re-proportioned to be shorter and wider, offering a grounded, substantial look. Customization & Assembly Main Shade: Measures 130mm tall and 140mm wide, heavily textured with vertical reeds. It simply slides over the base lip. Base Stand: Sits flat on the table with a 25mm height. It features a standard 42mm hole for an E27 socket and a discreet bottom channel for cable routing. Top Diffuser: A drop-in cap that hides the bulb and softens the upward light. All three pieces are designed to be printed easily without supports. The modular drop-in fit makes swapping bulbs or modifying the shade's color later straightforward.
Ivory Folded Ceramic Vases
A trio of statement centerpiece vases designed with deep organic grooves, sweeping necks, and soft ivory tones. Each piece balances a minimalist ceramic aesthetic with flowing, fabric-like curves, ready to print as functional tabletop decor. Low Spiral Vase: A wide, dramatic base that twists upward through 140 degrees into a slightly offset neck. Tall Wavy Vase: The anchor of the set, standing 210 mm tall with crisp vertical ribs and a gentle 45-degree rotation. Asymmetric Curved Vase: A sweeping swan-like profile that leans dynamically off-center with a reverse twist. Print Notes: Designed to be printed in standard FDM standard mode (hollowed out with 2.5 mm walls, rather than vase mode) for maximum rigidity and heft. No supports required. Ensure your print bed is well leveled to anchor the large flat bases securely.
Hollow Gothic Church Diorama
A stylized, minimalist architectural diorama of a hollowed-out Gothic church and surrounding graveyard. Designed as a four-piece kit for multi-material printing, this model translates a hyper-specific visual aesthetic into solid, printable geometry. Features Hollow Core: The main hall and spire are shelled out, allowing the interior floor plate to be printed in a contrasting color. Gothic Fenestration: Arched windows pierce the main walls. Diorama Elements: Includes stylized dead trees, minimal gravestones, and spherical pumpkins. Separated Bodies: Built to easily split by color for AMS/MMU systems or careful painting. Fits comfortably within a 120x90mm footprint.
140mm Gothic Church Mating Volume
A single-piece gothic church shell, dimensioned around a 140x68mm footprint. It features a completely hollow interior volume spanning the nave, tower, and aisles, surrounded by a continuous 2mm exterior wall. The model replaces solid block-style architectural prints with a true open-void structure. Before you slice, check your bridging setup—the steep 2:1 roof pitches are designed to print without interior supports, and the exterior flying buttresses and lancet windows are self-supporting, but the massive unified interior void will test your layer adhesion if you scale it down too far. Specs to verify: Overall Footprint: 140mm (length) × 68mm (width). Peak Height: 160mm at the front spire. Minimum Wall: 2mm throughout. Fitment: Does not snap to or mate with specific terrain bases—flat-bottomed for open plate placement.
38mm Tealight & Fluted Vase Set
Art Deco style vase and tealight holder set with matching vertical fluted profiles. The vase is sized at 200mm tall to accommodate standard bouquets, while the tealight holder has been raised to a 75mm pedestal height to balance the set visually. The holder features a precision 40mm bore, leaving exactly enough clearance for a standard 38x16mm tealight candle to sit flat without binding. Critical Dimensions: Vase: 200mm height, 80mm outer diameter. Holder Bore: 40mm diameter x 16mm deep (fits 38mm standard tealights). Holder Height: 75mm.