Starfleet Communicator Halloween Prop
Created today
Description
A handheld communicator prop in the spirit of classic Star Trek, sized to carry or clip to a costume belt. It is a 90 × 36 × 12 mm slab with rounded corners, a slotted speaker grille, a round dial and a raised gold-style delta emblem.
Remix hooks
- Body size: 90 × 36 × 12 mm. Scale length for a chunkier prop or shrink it for a pocket version.
- Grille slots: nine slots at 4 mm spacing. Change the count or width for a different look.
- Emblem: the delta is a simple 4-point polygon. Swap in a different insignia or text.
- Dial: 10 mm round knob. Make it a button, or add a hole for a small LED.
- Pairs with: a belt clip, a keyring loop on the back, or a hinged lid to make it a true flip communicator.
- Printing: print the parts in silver, gold and blue, or paint after printing.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Grab Pack Prop Set
What it's for A wearable grab pack costume prop designed for a 9-year-old. Includes the main backpack unit with integrated strap loops, plus two separate grabber arms ending in wide, open-palmed four-finger hands. Dimensions Backpack: 250 mm total width across the outer spools, designed to sit flat against the wearer's back. Strap loops: 35 mm internal clearance, sized to easily accept standard 1.5-inch webbing. Hands: Approximately 120 mm across the splayed fingers, giving a large cartoonish footprint. Print notes The backpack body prints as a single solid piece with the spools attached. The launcher arms and hands are separate bodies designed to print completely flat on the bed for maximum strength and zero supports. Paint them up or string actual colored wire between the backpack spools and the arm hubs to complete the rig.
Arcane Archmage Cat Wizard Hat
A wizard hat sized for a cat, featuring a curved cone, brim, gold band, crescent moon, and stars aligned to the cone surface. Features Curved Cone Geometry: Swept cone profile leaning backward with an organic taper. Surface-Aligned Stars: Three individual stars positioned along the cone's curved centerline path, normal to the local surface angle. Ergonomic Base: Curved underside relief to fit comfortably on a pet's head. Strap Slots: Built-in side cutouts for adding an elastic chin strap.
Elderstab 1.0
What it's for A two-piece print of the iconic Elder Wand, split cleverly right after the third handle knob to hide the seam. Dimensions Total length: ~250 mm Handle: ~102 mm, featuring a 10.4 mm x 3.2 mm recess for a ring magnet and a 35 mm deep secret compartment (6.5 mm diameter) hidden behind it. Tip: ~150 mm, with a 10.4 mm x 3.8 mm recess for a flat magnet (includes extra depth for felt padding). Assembly Glue a 10x3 mm ring magnet into the handle and a 10x2 mm flat magnet into the tip. Add a thin piece of felt between them for a softer snap. The secret compartment can hold a tightly rolled message.
45mm Cat Top Hat
A scaled-down top hat designed to sit between a cat's ears. The crown is hollowed out to minimize weight, and the brim features integrated loops to secure an elastic chin strap. Brim: 45mm diameter Height: 30mm overall Mounting: Twin 4mm holes for standard elastic cord Printability: Prints flat on the brim with no supports required; internal roof is a short 22mm bridge.
Yes it's another hat for my cat.
DapperCat brings a touch of formal elegance to your favorite feline. Designed as a classic stovepipe top hat, it features a distinct hatband and a gently rounded brim. Because pets rarely keep accessories balanced on their own, the design includes integrated under-brim mounting tabs so you can add a simple elastic chin strap. Dimensions Overall Diameter: 55 mm (at the brim) Overall Height: 30 mm Crown Opening: 30 mm diameter, tapering inward Print Notes Orientation: Prints as oriented (brim flat on the bed). Supports: The small strap tabs on the underside may require minor support depending on your printer's bridging capabilities. Material: PLA or PETG.
150mm Bayonet Twist Vault
A 150mm mechanical drop-in vault, built around a 50mm twist-lift track. This replaces the friction fit of the original 150mm Borg Friendship Vault with a proper bayonet mechanism. The outer cage runs three 18mm tall helical tracks to guide the core. The top cap terminates in a 40mm hexagonal drive plug; dropping it onto the core and twisting counter-clockwise forces the payload to lift 50mm out of the chassis. Bore Clearance: The 98mm core runs inside a 102mm cage bore. Verify your machine holds tolerances on large cylinders. Support-Free: The massive 90mm flat bridges of the original have been replaced by mechanical vertical slots with 45-degree angled roofs. No supports needed for the cage or core lugs. Payload Capacity: The hollow inner void measures 76mm in diameter by 110mm deep. To assemble, line up the core lugs with the vertical entry slots on the inner walls of the cage, push down to the top stop, and twist right to lock it securely to the bottom.