Stitch Head Bead With Ears
Created today
Description
A round Stitch-style head bead with two pointed ears, a lighter face patch, eyes and a nose, threaded by a vertical hole for cord or wire.
Remix hooks
- Head size: the head radius is 13 mm (26 mm across). Scale it down for jewelry-sized beads; keep the hole at 3.5 mm or larger for cord.
- Hole diameter: 3.5 mm runs top to bottom between the ears. Widen it for paracord or narrow it for thin elastic.
- Ear angle and length: ears are about 21 mm long, splayed 55° outward. Lower the angle for droopy ears, or shorten them for a chunkier keychain bead.
- Colours: the head, face patch, inner ears and eyes are separate regions, so they suit multicolour printing with filament swaps.
- Pairs with: plain round spacer beads, a keyring clasp, or a row of beads for a bag charm.
Photos
Technical views
More like this
Explore more in Keychains & EDC →
Minecraft Grass Block Keychain
What it's for A keychain shaped like a Minecraft grass block: smooth brown dirt body, green grass cap that overhangs slightly, and blunt, irregular grass drips on all four sides. A sturdy corner loop takes a key ring. Dimensions Approx. 27 × 27 × 28 mm Cap about 5 mm thick; drips 3.5–8 mm long Loop hole about 4 mm, at one top corner Remix ideas Swap colours for mycelium or snow blocks Change drip layout Enlarge the loop hole for a lanyard
Stacked Name Keychain Pendant
A black keychain pendant with bold white stacked lettering reading Nodi / Mani / Yani and a small red heart beside the last line. The loop sits above the N. Remix hooks Loop position: centred at about X 2, Y 33 with a 9 mm outer and 4.5 mm hole. Shift it or enlarge the outer diameter for a stronger ring. Heart gap: the heart sits about 1 mm clear of the final letter. Change its X offset (34.2) to adjust spacing. Layer heights: 3 mm black base, 2 mm raised white lettering and red heart, 5 mm total. Font: Archivo Black at 8.5 mm; swap for a rounder face for a softer look. Pairs with: a split ring or small carabiner; assign black, white and red to separate AMS filaments.
LANA Heart AHMED Keychain Nameplate
A three-colour keychain nameplate reading LANA ♥ AHMED, about 60 × 10 mm and 5 mm thick: a 3 mm black base with white letters and a red heart raised 2 mm on top. A black loop on the left end has a 4.5 mm through-hole for a standard key ring. Remix hooks Base thickness (3 mm): the number that sets the plate's heft. Drop it for a lighter tag. Raised height (2 mm): letters and heart share it. Make the heart taller for emphasis. Loop hole (4.5 mm): widen it for thicker rings or cord. Backing margin (1.5 mm): the black border around the letters. Thicken it for a sturdier outline. Names and font: the text is DM Serif Display at about 7 mm tall. Swap the names or the typeface. Pairs well with a metal split ring. Each colour is a separate region for AMS assignment.
Indian Number Plate Keychain HR82 6791
A rectangular Indian-style number plate keychain with the registration HR82 6791 in raised black letters on a white plate. 70 × 20 mm plate, 3 mm thick, with rounded corners Text raised 0.75 mm for clean printing with a 0.4 mm nozzle 4 mm ring hole on the left side Flat back, no supports needed Single connected piece, white base with black text
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.
Star Apple Watch Keychain Enclosure
A rounded five-point star shell that holds an Apple Watch SE 44 mm (A2352) as a keychain, with the real display open at the front. Two printed parts: a front shell (print mating face down) and a rear cover (flat face down) joined by four M2 screws. Remix hooks Watch fit: case 44 x 38 mm, 0.4 mm clearance per side, cavity depth 11.2 mm, corner radius 8 mm. Change clr, D and cav_r to tune the fit. Display window: 38.4 x 32.8 mm. This is an estimate, so confirm it against the watch. Crown, button, mic and speaker cutouts: positions are placeholders on the right and left sides. Measure the watch and move them before printing. Star size: the star_pts radii (50 / 33 mm) set the roughly 80 mm span. Shrinking the valley radius thins the wall near the cavity corners. Keyring hole: 5 mm at the top point. Raise ringd or move ringpos for a bigger ring. Charging opening: 32 mm round hole in the rear cover (charge_d). Pairs with: M2 x 8 mm screws, a small split ring, or a TPU bumper variant. Still to verify Crown and button height and position Speaker and mic positions Exact display window size Rear sensor bulge depth Treat the first print as a fit prototype. It is not load-rated.