T-Rex Holding LUKE Sign
Created today
Description
A standing T-rex on a flat base, gripping a name sign that reads LUKE in raised lettering. Prints as one piece, sign facing front.
Remix hooks
- Name: swap "LUKE" for any short name; keep the sign about 60 mm wide, or widen it for longer names.
- Font and size: Luckiest Guy at size 12 fills the 60 x 22 mm sign; drop the size if the name grows.
- Base: 70 x 100 x 3 mm, easy to enlarge or turn into a keychain-sized stand.
- Colour split: base, dino and sign are separate regions, ready for multicolour prints.
- Pairs with: a desk shelf, or a row of dinos with different names.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
3.2 mm Jump Ring Georgie Letter Links
Seven individual letter links spelling G-e-o-r-g-i-e, made to be joined by metal jump rings into a name bracelet. Fitment Each link is a 14 × 14 mm plate, 3 mm thick, with the letter raised 1.5 mm in Luckiest Guy. A 3.2 mm hole runs front to back through a round tab on each side, so a ring passes through the flat face. Hole centres are 19 mm apart on each link; adjacent links join with one jump ring through facing holes. Check before printing Jump ring wire must be under about 3 mm, or the holes will not take it. Does not fit Rings with wire thicker than 3 mm, or links with a closed clasp-style bail.
Luggage Strap Tag, 5 mm Slot, STEVE
A 90 × 50 × 3 mm luggage tag with a 5 × 22 mm strap slot and the name STEVE raised inside a recessed label panel. Fitment Fits straps up to 5 mm thick through the 22 mm-wide slot. Does not fit wide or double-layer straps, or standard key rings without a loop. Measure the strap thickness before printing; the slot is 5 mm. The lettering stands 0.9 mm proud of the panel floor and sits below the tag's top surface, so it is protected from rubbing.
Kids Fidget Board with Spinner
A fidget board for small hands: a base with a three-lobe spinner and a sliding button in a track. Printed as five separate pieces, so nothing fuses and no supports are needed. Base: 70 × 36 mm with a spinner pocket, a fixed axle and a through slot with an underside recess. Spinner: prints flat, drops over the axle with 0.7 mm clearance per side. Axle cap: glues onto the peg at the top of the axle to hold the spinner on. Slider button: prints flat with the stem pointing up. The stem passes through the slot. Retaining foot: glues onto the stem underneath, inside the recess, so the button slides but cannot lift out. Assemble in this order: spinner, then cap; button stem through the slot, then foot glued on. Use glue suited to the filament, and check that glued parts are fully secure before giving the toy to a young child.
Engraved Family Roll-Call Heart
A classic love-heart pendant with the family names (Mum, Dad, Ada, Avi, Molly) engraved in a neat stack down the front. Two tiny hearts are cut into the upper lobes with their points aimed at the centre, like a pair of arrows pointing in at the names. Soft rounded front and back edges Names and mini hearts engraved 1 mm deep into a 3 mm thick body Ring loop on top for a chain or jump ring Prints flat, no supports needed
Mini tort decorativ aniversare 2 ani
What it's for Un tort în miniatură pe două etaje, cu lumânare și inimioară, ca decor sau cadou pentru ziua unei fetițe de 2 ani. Dimensions Soclu: 70 × 40 × 4 mm Etaj inferior: Ø40 × 14 mm Etaj superior: Ø28 × 12 mm Înălțime totală: aprox. 44 mm Remix ideas Adăugați numele fetiței pe soclu. Înlocuiți inimioara cu o stea sau o floare. Printați în culori pastel diferite.
150mm Bayonet Twist Vault
A 150mm mechanical drop-in vault, built around a 50mm twist-lift track. This replaces the friction fit of the original 150mm Borg Friendship Vault with a proper bayonet mechanism. The outer cage runs three 18mm tall helical tracks to guide the core. The top cap terminates in a 40mm hexagonal drive plug; dropping it onto the core and twisting counter-clockwise forces the payload to lift 50mm out of the chassis. Bore Clearance: The 98mm core runs inside a 102mm cage bore. Verify your machine holds tolerances on large cylinders. Support-Free: The massive 90mm flat bridges of the original have been replaced by mechanical vertical slots with 45-degree angled roofs. No supports needed for the cage or core lugs. Payload Capacity: The hollow inner void measures 76mm in diameter by 110mm deep. To assemble, line up the core lugs with the vertical entry slots on the inner walls of the cage, push down to the top stop, and twist right to lock it securely to the bottom.