Created 1 months ago
Description
A classic tapered planter pot designed for small indoor plants. The base features a central drainage hole surrounded by a ring of six additional holes to prevent waterlogging and ensure healthy root systems. A slightly thickened rim provides structural rigidity and a clean visual finish.
Design specifications:
Images
A four-panel tapered chimney with a straight brick base, paired with a half-relief two-storey mill front in OO scale. The wall, ten window frames and plank door all print flat. Each window frame and the door now carries a thin web around its outside edge to hold it down during printing. Remix hooks Web width (webw, 1.8 mm): wider grips better; keep it under half the 4 mm spacing so neighbouring webs stay separate. Web thickness (webt, 0.3 mm): roughly one or two layers. Thinner peels off easier, thicker holds harder. Window grid (14 x 28 mm frames, 4 mm spacing): change the spacing if the web is widened. Pairs with: the chimney set on the same plate layout, and a clear or painted glazing insert behind the frames. Print notes Trim the web with a hobby knife after printing, before fitting frames into the wall openings. Wall is 200 mm long and needs its own print separate from the chimney set.
Dos placas rectangulares de 210 × 60 × 2 mm con letras en relieve de 1,5 mm en blanco sobre placa negra. Placa 1: LANDING, TAXI W y TAXI, con cinco agujeros pasantes de 10 mm. Placa 2: LOGO, STROBE, ANTI COLISION, WIN y WHELL, sin agujeros. Letras de 5 mm de alto en Montserrat. Altura total con letras: 3,5 mm.
Exploded miniature of a masjid scene with every component spread apart with visible gaps. Parts: white base, platform tiers, four black Kaaba walls, roof, door, gold bands, walkway tiles, arrows, palms, bushes, grass, pilgrims, Zamzam station, Maqam Ibrahim and blue sign parts. Layout: exploded only, no assembled copy. Export: the download is one file; separating individual parts happens outside this model.
What it's for A miniature suitcase standing upright on four sideways-mounted wheels, with a pull handle on top and a small thin scale plate set into the top face just in front of the handle. The plate carries a raised readout of 52 lbs, so the piece reads as a luggage scale at a glance. It works as a small desk ornament, a travel-themed display piece, or a scale prop for a dollhouse or diorama. The whole thing is one plain neutral finish, with no colour coding or recessed front screen. Dimensions Overall footprint: 60 × 24 × 100 mm (width × depth × height, as it sits on the print plate) Wheels: mounted sideways, axles running across the width of the case, so the body rests on them Weight plate: a small thin panel on the top face, in front of the handle Readout: raised 52 lbs lettering, picked as a believable airline-limit weight — say if you want a different figure Print notes The model prints as a single piece lying on its wheels, so no supports are needed under the body. The raised readout is small — a 0.4 mm nozzle with fine layer heights keeps the digits and the "lbs" legible, and a 0.25 mm nozzle gives crisper text. The thin top plate is shallow, so check that your bridging over that area is clean. Remix ideas Change the readout to a different weight, or leave the plate blank for a custom label. Swap the handle for a telescoping version, or add corner guards to the body. Scale the case up to hold small items, or down to keyring size. Finish A single neutral colour suits the plain, serious look — the design relies on shape and the raised text rather than colour contrast, so any filament works.
A castle-themed marble run built around a single continuous track. The marble enters at the top of a central keep, spirals down three full laps, passes through covered tunnel sections, and leaves along a straight exit ramp at the front. The track has no steps, gaps or pads. It descends at a constant slope, so the marble rolls without bumps or sudden speed changes. Channel width 20 mm with 10 mm side walls, sized for a 16 mm marble Three spiral laps with a tunnel section on each lap Exit ramp with the same slope as the spiral and an end wall to stop the marble Four crenellated corner towers with curtain walls on the back and sides Support arms connect the track to the central keep The front is left open so the exit ramp stays clear. Print the track at a fine layer height for the smoothest surface.
Flat diamond panel insert, 177.8 mm point to point and 127 mm across the widest part, 3 mm thick. There is no specific host frame or device in the design, so the opening is the thing to match: this is a plain flat diamond with sharp corners and no holes, lip, or bevel. Fits: a diamond-shaped opening or groove sized for 177.8 mm length and 127 mm width, with clearance for the 3 mm thickness. Replaces: a flat diamond panel insert of the same point-to-point and across dimensions. It does not include any mounting features. Check before printing: the opening’s long diagonal and short diagonal, plus groove depth and clearance for 3 mm material. If the opening is 7 in by 5 in, confirm the actual clearance; the sharp corners need matching square corners or relief. Does not fit: frames that rely on screw holes, a retaining lip, rounded corners, or a beveled edge. It also does not fit openings smaller than 177.8 x 127 mm.