Turbah Disc Case with Keychain Loop
Created today
Description
Round two-piece case sized for a 35 mm Hussaini Turbah disc, with a black body, a red central medallion and a silver ornamental ring on the lid, plus an integrated keychain loop.
The container and lid are both 42 mm in outer diameter and close to an overall height of 18 mm. The lid fits over a stepped rim on the container and clicks onto a small bead, so it stays on without glue.
- Outer diameter: 42 mm, container and lid
- Inner cavity: 36 mm diameter, about 13 mm usable depth
- Closed height: 18 mm
- Lid socket: 0.2 mm clearance per side, with a snap bead
- Integrated keychain loop on the container, 5 mm hole
- No text or lettering
Print the container and lid as separate bodies. Print the medallion and ornament in red and silver, or paint them.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Slipbar — Snap-On G Cap
Slipbar G Cap is a standalone G-shaped cover that snaps onto the corners of a 68 × 38 × 10 mm rectangular buckle frame. The plate itself is the letter G, stretched to fill the frame's face, with a small clip at each corner. Features G-shaped plate, about 71.6 × 41.6 mm Four corner clips with small inward lips that catch the frame's lower edge Mirrored so the G reads correctly from the front face when printed face-down Print notes Print with the front face on the build plate PETG flexes best for the clips Test-fit the snap and adjust the lip if it is too tight or loose
Lemon Slice Earring Cover
A two-piece clamshell case designed to snap cleanly over a 29mm circular earring. Both halves print face-down and feature the decorative lemon slice pattern on their outer faces. What it's for Transforming a plain hoop or disc earring into a 3D fruit slice without permanent modification. The two halves securely press-fit together, sandwiching the jewelry inside while leaving a notch for the earring hardware to pass through normally. Dimensions Overall size: 36 mm diameter, 6.5 mm total thickness when assembled. Internal pocket: 29.5 mm diameter by 2.5 mm deep, tailored for a 2 mm thick earring. Hardware slot: 4 mm wide notch at the top edge. Assembly Prints as two separate pieces side-by-side, with the decorative faces flat on the bed. Features four alignment pegs that snap the halves together. The symmetrical layout ensures the hardware slots align perfectly when closed.
Women's Sunglasses Frame with Folding Arms
Printed sunglasses where the parts crowd each other on the plate and fuse: this set lays the frame, two folding arms, ribbon inserts and hinge pins out with clear space between them. Frame width: 145 mm, 50 mm tall, 5 mm plate, hinge ears 18.5 mm high Lens openings: 50 × 36 mm each, 16 mm bridge gap Arms: about 139 mm long, 8 mm wide, 6 mm thick, with at least 4.8 mm between each part on the plate Hinge pins: four, 2 mm across, in 2.4 mm holes Hearts and breast cancer awareness ribbons recessed 1 mm on the frame and arms Print flat, no supports needed for the arms
Birrete de graduación con agujero pasante de 10 mm
Birrete de graduación sin borla, con un agujero vertical de 10 mm que lo atraviesa por el centro, desde la base hasta la tabla cuadrada. La base cilíndrica mide 40 mm y la tabla ocupa unos 84 mm en la placa de impresión. La pieza es hueca por dentro: la cavidad está abierta por debajo, con paredes de 2,5 mm y un techo de 3 mm bajo la tabla. El agujero central de 10 mm sigue siendo pasante. Antes de imprimir Diámetro del agujero: 10 mm, vertical y pasante. Es la medida crítica: comprueba el diámetro real de lo que vayas a insertar y ajusta el agujero o repásalo con una lima si necesitas holgura. Huella en la placa: unos 84 × 84 mm. Orientación: imprime con la tabla hacia abajo para que la cavidad interior no necesite soportes. No encaja: una anilla de llavero pequeña sin holgura; el agujero de 10 mm está sobredimensionado para ese uso.
Vela Número 2 Archivo Black 90 mm
Vela de aniversário em formato do número 2, com 90 mm de altura e 15 mm de corpo, em fonte Archivo Black com cantos arredondados (raio 4 mm). Borda em alto relevo de 2 mm de largura e 1 mm de altura na face superior. Altura do número: 90 mm Espessura do corpo: 15 mm (16 mm com a borda) Raio de arredondamento: 4 mm Sem furo para vela Sem chanfro nas arestas superiores
Pieza actualizada de clic 26 de octubre
Conector de cierre de clic con dos aletas laterales, pensado para encajar en el alojamiento cuadrado del mango curvo de una cucharilla adaptada. Qué encaja Cuerpo cuadrado de 15,6 mm de ancho que entra en el alojamiento de 16 mm del mango rosa. Ranura para la pieza de la cuchara: 10 mm de profundidad, 5 mm de largo y 3 mm de alto. Medida a comprobar antes de imprimir Las ranuras que liberan cada aleta miden 1,6 mm, para que la aleta se doble sin tocar el núcleo. La pieza de la cuchara debe medir unos 0,2 mm menos por lado que la ranura. Incompatibilidades No sirve para otros mangos: está dimensionado solo para el alojamiento de este mango. Se recomienda PETG, impreso tumbado de lado.