Heart and Ribbon Sunglasses Frame with Arms
Created today
Description
Sunglasses that need an awareness mark on every visible surface, not just the front: this frame has ribbons at both outer corners and a recessed ribbon on each folding arm, plus a row of hearts.
- Frame width: 145 mm, rounded corners, two lens windows with a rear seat step
- Separate parts: frame, left arm, right arm, ribbon inserts, hinge pins
- Arm ribbon and hearts: 1 mm recessed into the top face, no overhangs
- Hinges: teardrop-shaped pin holes at staggered heights so folded arms stack
- Print flat, no supports; glue the ribbon inserts into their pockets
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
V2_Aşkım Love Letter Photo Frame
Ein winziger Bilderrahmen im Stil einer Liebeskarte: Der Name „Aşkım" thront als erhabene Schrift über dem Rahmen, auf der Rückseite wartet eine versteckte Botschaft samt großem Herz. Außenmaß 52 × 52 × 1,5 mm, Fach für ein 50 × 50 mm Foto Rückwand 0,6 mm, geschlossen Name 4 mm hoch in Arial-ähnlicher Schrift (Liberation Sans) Unterseite: Widmungstext und Herz, 0,25 mm tief graviert (lesbar von hinten)
Schild 200 x 100 x 8 mm Sauerteig
Schild mit zweizeiliger Beschriftung "Natur" und "Sauerteig" und einer Aufhängeöse oben mittig. Platte schwarz, Schrift weiß und erhaben, als ein zusammenhängendes Teil für Mehrfarbdruck. Platte: 200 × 100 × 8 mm, Ecken gerundet Öse: 30 mm Außendurchmesser, 14 mm Loch, Gesamthöhe 120 mm Schrift: 32 mm hoch, 0,6 mm erhaben, 0,2 mm eingelassen Druck: Drucker mit automatischem Filamentwechsel (z. B. AMS), 3MF empfohlen
Magic octagon coin.
An octagon coin whose raised arrow disappears into the bed side: the underside is now flat with the arrow cut in as a shallow dent, so no layer prints over empty air. Size: 50 mm across corners, 3 mm body, 4.2 mm total height. Top: 0.6 mm raised rim, with the arrow rising 1.2 mm so it stands 0.6 mm above the rim. Change filament at that layer to colour only the arrow. Underside: flat, with a 0.6 mm deep arrow indentation turned 90° from the top arrow, plus a 1.4 mm wide, 0.6 mm deep groove about 2 mm in from the edge. Print: lie it flat, underside on the bed, no supports.
Raised-Text Visitor Pass 110x70 mm
A 110 × 70 mm single-piece visitor pass for Himalaya Public Sr. Sec. School, with a 2 mm base plate and bold text raised 0.8 mm above it. The three centred lines read HIMALAYA PUBLIC, SR. SEC. SCHOOL and VISITOR PASS. Plate: 110 × 70 mm, 2 mm thick, rounded corners, flat bottom Text: 0.8 mm raised, fused to the plate Total thickness: 2.8 mm Single colour, no supports needed Text size unchanged from the previous version
Mike Wazowski Horns for Shirt
Two horns to sew onto a maternity shirt for a Mike Wazowski costume. A loose horn flops or slides off fabric, so each one has a flat round base with sewing holes to stitch it down. Key numbers Height: about 47 mm each Base: 40 mm round disc, 3 mm thick Six 3.2 mm sewing holes around each base Print: base flat on the bed, no supports needed, cream or white filament
Wazowski — Hinged Arms, Viper Horns
Wazowski is a set of two hinged monster arms and two horns, made to sew onto a maternity shirt panel. Each arm splits into an upper arm and a forearm with hand, and the horns are slender, backward-curving thorns in the style of a desert horned viper. Features Upper arm with a single lower hinge plate. The top plate is left off so the forearm can be glued in place. Forearm and hand with three fingers and a thumb, plus a short pin that locates in the hinge hole. Two horns, 60 mm tall, tapering to a fine tip with a slight curve. Round flanges with six sewing holes on each arm and horn. Print notes Print the arms in TPU or another flexible filament so they move with fabric. Glue the forearm knuckle onto the hinge plate with the pin seated in the hole. Proportions are set for scaling, so resize in the slicer to fit.