Utilitarian Door Clip Holder
Created today
Description
A custom mounting block designed for seating VW door clips.
- Features a contoured entry channel to guide the clip's head and stem into place.
- Includes an 8mm downward-extending perimeter skirt with a 28mm front opening for secure alignment.
- Print base-down; the clearances are designed to grip without fusing.
Images
More like this
Explore more in Automotive, RC & Hobby →
ClipBase — VW Door Mount
A direct replacement mount for a broken VW Golf 6 door panel clip (6Q0 868 243). Designed to be printed in a weldable polymer (like PP) and permanently reattached to the interior door panel using a plastic welder or soldering iron. Features Weld-Ready Base: Completely flat 32x25 mm bottom footprint maximizes the surface area for a strong perimeter weld. Tapered Insertion: V-shaped entry path allows the door clip to self-center during installation, ending in a secure 4 mm snap-fit neck. D-Shaped Profile: Rounded rear geometry eliminates sharp corners that could catch during the welding process, while saving material. Precision Cavity: Two-tier internal structure correctly houses both the 22 mm clip head and the 8 mm shaft without play.
Lego piece for wagon door runner with thinner teeth bit slightly smaller
Wagon door runner to replace 3 off 15208 bricks Version with slightly too large slope
Osłona Gniazda Kampera z Klapką v2
Gniazda zewnętrzne w przyczepach mają tendencję do zbierania wody i pyłu, zwłaszcza w czasie jazdy. Ta osłona rozwiązuje problem braku szczelności w standardowych pokrywach poprzez zastosowanie profilu labiryntowego i kapinosa, całkowicie eliminując potrzebę gumowych uszczelek, które z czasem parcieją. Wymiary: Ramka 65×65×20 mm, precyzyjnie centrowany otwór 48×48 mm. Wydruk: Zaprojektowana jako model print-in-place ze zintegrowanym zawiasem. Zalecana minimalna wysokość warstwy to 0.2 mm dla zachowania tolerancji mechanizmów. Ochrona: Wyposażona w kanał odpływowy (5°), daszek nad zawiasem oraz barierę labiryntową.
GOpro fieur skadis
A sturdy, mechanical mount that attaches standard GoPro gear to an IKEA SKÅDIS pegboard. Unlike standard static mounts, this design features a vertical hinge axis allowing the camera to pan left and right, making it ideal for overhead workspace recording or fixed security angles. The design relies on an M5 bolt and nut to clamp the vertical rotation axis firmly in place once the angle is set. The quick-release buckle block prints separately for optimal layer orientation, plugging into the rotating base plate. Assembly Base: Locks into two standard SKÅDIS slots without tools. Mechanism: Insert an M5 bolt through the side clamp, trap an M5 nut in the hex recess, and tighten with the printed knob. GoPro Buckle: Glues or presses onto the two registration pegs atop the rotating platform. Slide your standard GoPro helmet buckle straight in.
60mm RV Outlet Weather Cover
A heavy-duty, print-in-place weather cover designed for RV and camper electrical outlets. This cover features a robust 60x60mm footprint with an uninterrupted 40x40mm rear passthrough, replacing standard multi-hole mounts with a single unified channel. Specifications Overall Dimensions: 60 x 60 x 20 mm Front Chamber: 48 x 48 mm (17 mm depth) Rear Passthrough: 40 x 40 mm (centered) Hinge Mechanism: Integrated 2.5 mm axis knuckle hinge (100° range) Weather Resistance: Geometry-based labyrinth seal, bottom drip edge, and top hinge shield Tolerances: Pre-calculated 0.3 - 0.5 mm mechanical clearances for print-in-place operation
Camper Electrical Socket Cover
A flush-fitting protective cover for a standard electrical socket, designed to keep out dust and debris when not in use. It features a built-in knuckle hinge and a snap-fit latch to keep the flap securely shut during travel. Print and Fit Overall Dimensions: 60 × 60 × 20 mm Internal Chamber: 48 × 48 × 17 mm deep Mounting Pattern: Four 4 mm holes spaced 48 mm apart Clearance: 0.5 mm around moving parts — prints in three separate pieces (frame, flap, and pin) for easy assembly without fused hinges.