Viking Text Phone Stand
Created 1 months ago
Remixed once
Description
What it's for
A two-colour desktop phone stand featuring a deep front retaining lip capable of holding thick cases. The backrest is angled at 30 degrees for comfortable viewing. It features custom text elements placed on the front lip and backrest.
Dimensions
- Base footprint: 85 mm wide by 100 mm deep.
- Height: Roughly 95 mm total vertical height.
- Device slot: 15 mm tall front retaining lip.
Remix ideas
- Adjust the text elements to swap the names or font.
- Change the backrest angle for a steeper or shallower viewing position.
Images
More like this
Explore more in Desk & Tech →
Unyielding Phone Stand
Every time you try to prop a phone up against a coffee mug or a stack of coasters, it inevitably slides flat exactly when you look away. This ends that. Three solid, intersecting slabs that hold your phone at an unyielding 65-degree viewing angle. No hinges to wear out, no tipping backwards when you tap the top of the screen. The Fit: A 14.5mm perpendicular gap comfortably swallows thick, rugged phone cases. The Footprint: The 95mm base plate throws the center of gravity far enough back to prevent tipping even with a heavy device. The Print: Lays flat on its side on the build plate. Requires exactly zero support material.
Wavy Corrugated Phone Stand
A minimalist A-frame phone stand that replaces flat surfaces with a continuous, 3D corrugated ripple. The entire structural ribbon pulses slightly in thickness across its width, giving it a tactile, architectural presence without adding complexity or relying on extra parts. Remix Hooks Amplitude & Frequency: The sin(i25)1.2 math driving the ripple is begging to be played with — dial up the 1.2 for deep fins, or tighten the 25 for a finer corduroy texture. Tilt & Gap: Out of the box, it leans at a tilt of 25 degrees with a generous 14.5mm slot (gap) to clear heavy-duty cases, but those variables are cleanly exposed for quick tweaking. Material pairings: The corrugated face catches highlights nicely, making it a great candidate for silk PLAs or highly reflective metallic filaments.
A-Frame Mobile Stand
A sturdy, functional stand for phones and small tablets. Designed with a 35-degree viewing angle, it works nicely for watching media or keeping an eye on notifications while at your desk. Features a 16mm-wide cutout for routing charging cables Includes a solid rear spine to prevent flexing when tapping the screen 14mm resting gap accommodates most phones, even with a case Prints in one piece without supports
Game controller stand
A two-part sliding stand designed to adapt to any device thickness. The front lip captures the bottom edge of the device, while the heavy backrest slides forward along a precision dovetail track to lock it in place. Built-in dovetail slide adjusts from bare devices to thick rugged cases Generates zero overhangs on the track mechanism for reliable printing Two-part flat-bottom layout prints cleanly without supports 70-degree backrest angle provides a stable viewing geometry
140mm Angled Phone Dock
A rigid desktop dock designed to support modern smartphones. The structure features a 65-degree viewing angle and integrated cable management for charging while docked. Specifications Base: 76mm x 100mm with routed cable channel Spine Height: 140mm for standard and plus-sized devices Cradle Slot: 18mm depth to accommodate most cases Construction: Single-piece fixed geometry
355ml Can Tray & Angled Desk Stand
Two-piece modular desk platform with a precision-fit dovetail seam. The main tray spans 250x160mm and runs four custom 68mm bores—sized specifically to drop in 355ml soda cans with exactly 1mm of clearance so they never bind. The extension plate mates flush to the right edge via four full-depth dogbone locks. It carries over the four cable passthrough notches and builds into an 89mm-tall backing plate offset precisely to set up a 15-degree resting angle off the main tray's front partition. Built with squared alignment edges against the seam and a solid side-stop block to lock your gear into place. Critical Dimensions Host Standard: 355ml standard soda can (66mm body). Overall Footprint: 500mm wide by 160mm deep (assembled). Seam Clearance: Locks are cut with 0.25mm of total gap so they seat tight without filing.