Vileda Broom Bar Hook
Created today
Description
Brooms that crash to the floor the moment a closet door closes are a solvable problem. This replacement end cap drops directly over a standard Vileda metal handle, replacing the stock hang loop with a massive, open hook that funnels right onto a closet bar without binding.
The top arch features a flattened plateau. Flip the model onto this face in your slicer, and the entire assembly prints cleanly upside down without supports.
Fitment Details
- Handle sleeve: 25.7 mm bore drops straight over the bare metal stick, seating the internal mushroom anchor.
- Hook clearance: U-channel accommodates hanging rods up to 27.5 mm.
- Print specs: Support-free when oriented on the flat top face; use PETG for impact resistance.
Images
More like this
Explore more in Home & Fixtures →
4-Way Water Manifold
A compact, print-in-place water manifold built for automated plant irrigation systems. It splits a single main feed into four independent channels with smooth internal transitions to minimize flow restriction. Inlet: Single center-mounted fitting sized for 8mm ID hose. Outlets: Four equally-spaced fittings sized for 5mm ID hose. Barbs: Dual retaining ridges on all connections to prevent slip-offs under pressure. Internal Channels: Fully hollowed 7mm common chamber with spherical transitions to eliminate dead zones and sharp fluid corners.
Anti-Spill Armrest Caddy
Sofa arms are basically designed to launch drinks onto the rug the second you shift your weight. This drops a rigid U-channel over the armrest to bridge the gap, locking down a flat staging plate on one side and a deep cup holder into the other. Specifications Total Length: 200 mm Inner Channel Width: 185 mm (verify this clears your sofa arm) Cup Holder: 80 mm diameter, 32 mm depth Print Specs: Prints hollow to save time and material. No supports needed if your bridging is dialled in.
8mm Tank Bulkhead Fitting
M18 threaded bulkhead fitting engineered to pass an 8mm inner-diameter irrigation hose securely through a plastic tank lid. Interface: M18x2 thread with an independent hex locking nut. Sealing: Recessed O-ring groove on the interior flange face (2.5mm wide) to provide a watertight seal against the tank wall. Hose Barb: Double retaining barbs with a reinforced transition cone to handle clamping forces. Clearance: The hex nut is designed to slide freely over the 10.2mm barbs and internal threads are sized for clean printing in PETG. Both components are oriented to print flat on the bed without supports.
Aura — Fitted Twisted Pendant
Introducing the Aura pendant shade, strictly tailored to fit on standard 210mm print beds. The flowing, twisted ribbons form a striking teardrop silhouette, capturing light and shadow with an elegant, organic feel. Dimensions & Specs Scale: Fits comfortably within a 210mm cube (205mm height, 200mm maximum diameter). Structure: 32 spiraling ribs, reinforced to a robust 1.8mm width for a full, sturdy profile that prints without supports. Mounting: Built with a standard E27 pendant socket ring at the top and a wide-open base for clean downward lighting. Designed to be printed as a single, durable piece.
Reinforced 8mm Irrigation Y-Splitter
A heavily reinforced Y-shaped hose connector built specifically to merge two fluid lines into one. Designed for 8mm inner-diameter flexible tubing, it uses a solid central hub rather than thin overlapping walls, ensuring the part handles pressure without snapping at the junction. The internal geometry is sculpted to maintain flow: a 6mm channel through the main body prevents a bottleneck at the merge, smoothly necking down to 5mm inside the barbs to guarantee thick, watertight perimeters where the plastic gets thinnest. A precision flat cut on the underside allows the entire assembly to drop straight onto the build plate, completely eliminating the need for support material. Remix Hooks & Constraints Hose Fit: The double barbs peak at 8.5mm OD and drop to a 7.2mm valley, grabbing 8mm ID silicone or vinyl hose tightly. Print Settings: Built for PETG or ABS. Use 4 to 5 perimeters to ensure watertightness and maximum mechanical strength against bending forces. Scaling: Scaling up works cleanly for larger hose (e.g., 125% for 10mm ID), but scaling down is not recommended as the internal channel will restrict flow and the walls may drop below the required thickness for a watertight seal.
Narrow Armrest Caddy
Sofa arms exist mostly to launch drinks onto the rug the second you shift your weight. This saddles a rigid channel over a narrow armrest to bridge the gap, locking down a recessed staging plate on one side and a cup holder on the other. I deepened the plate recess to catch condensation and minor spills before they track down the side of the couch. Specifications Inner Channel Width: 141.8 mm (check your sofa arm before printing) Plate Recess Depth: 5 mm Cup Holder: 80 mm diameter, 20 mm deep Print Specs: Prints upright, no supports needed. Use PETG if your coffee runs hot.