Wavy Corrugated Phone Stand
Created today
Description
A minimalist A-frame phone stand that replaces flat surfaces with a continuous, 3D corrugated ripple. The entire structural ribbon pulses slightly in thickness across its width, giving it a tactile, architectural presence without adding complexity or relying on extra parts.
Remix Hooks
- Amplitude & Frequency: The
sin(i*25)*1.2math driving the ripple is begging to be played with — dial up the 1.2 for deep fins, or tighten the 25 for a finer corduroy texture. - Tilt & Gap: Out of the box, it leans at a
tiltof 25 degrees with a generous 14.5mm slot (gap) to clear heavy-duty cases, but those variables are cleanly exposed for quick tweaking. - Material pairings: The corrugated face catches highlights nicely, making it a great candidate for silk PLAs or highly reflective metallic filaments.
Images
More like this
Explore more in Desk & Tech →
Unyielding Phone Stand
Every time you try to prop a phone up against a coffee mug or a stack of coasters, it inevitably slides flat exactly when you look away. This ends that. Three solid, intersecting slabs that hold your phone at an unyielding 65-degree viewing angle. No hinges to wear out, no tipping backwards when you tap the top of the screen. The Fit: A 14.5mm perpendicular gap comfortably swallows thick, rugged phone cases. The Footprint: The 95mm base plate throws the center of gravity far enough back to prevent tipping even with a heavy device. The Print: Lays flat on its side on the build plate. Requires exactly zero support material.
Game controller stand
A two-part sliding stand designed to adapt to any device thickness. The front lip captures the bottom edge of the device, while the heavy backrest slides forward along a precision dovetail track to lock it in place. Built-in dovetail slide adjusts from bare devices to thick rugged cases Generates zero overhangs on the track mechanism for reliable printing Two-part flat-bottom layout prints cleanly without supports 70-degree backrest angle provides a stable viewing geometry
MiniBus Elbilia
A highly stable, monolithic desktop phone stand built entirely for reliable FDM printing. It features a continuous heavy-base profile that resists tipping, an integrated 65-degree resting plane, and a deep front retaining lip. Remix & Mod Hooks Resting Angle: Currently cut precisely at 65 degrees; shifting the top control points can stand the phone up straight for video calls or lay it back for touch typing. Cable Routing: Features an invisible internal bend channel. The 18x15mm pass-through slot is sized for standard USB-C heads, but can easily be widened for thick multi-cables. Base Profile: Built as a single continuous 2D extrusion. Extending the base depth (Y axis) or adding weight-reduction cutouts are trivial modifications for someone looking to save filament or stretch the footprint.
Support Casque Base 120mm
Support monobloc pour casque audio. Construit pour la stabilité sans assemblage requis. Dimensions critiques : Base : 120 mm de diamètre pour assurer l'équilibre de l'ensemble. Hauteur du pied : 180 mm (la hauteur totale atteint environ 217 mm avec le berceau). Berceau (repose-bandeau) : 45 mm de profondeur avec un profil convexe. À vérifier contre la largeur de l'arceau du casque ciblé avant impression. Imprimable en PLA d'une seule pièce, sans supports. L'orientation par défaut place la base sur le plateau.
19.5mm Desk Edge Puck Mount
Edge-mounted charging cradle sized for the 33.5mm Google Pixel Watch magnetic puck. Designed to drop over a standard 3/4-inch (19.5mm) wood plank. Fitment: The 33.5mm bore sits at the rear of the housing. You push the puck in from the back, then slide the whole assembly over your desk edge — the wood itself traps the puck so it cannot back out. Cable Routing: An 8mm slot on the bottom allows the cable to drop cleanly out of the way. Incompatibilities: Does not fit full-sized phone Qi chargers or desks thicker than 19.5mm without adjustment. Phone hooks have been removed from this version.
Clip Câble 6mm Poney
Support de bureau pour retenir un cordon lorsqu'il n'est pas branché, intégré dans un gabarit de poney stylisé. Spécifications de montage Câble cible : Gaine de 5,5 à 6 mm de diamètre (type USB-C tressé, cordons de charge standards). Rétention : Fente supérieure pincée à 4,5 mm pour un encliquetage en force. Fixation : Base plate de 24 x 35 mm, conçue pour recevoir un carré d'adhésif double-face. Incompatibilités : Ne convient pas aux câbles d'alimentation épais, aux cordons HDMI, ni aux fils de souris ultra-fins (qui glisseront hors de la gorge).