100mm Stepped Cylinder Adapter
Created 8 days ago
Remixed once
Description
A continuous multi-diameter cylinder with a central bore. Features a wide primary section and a narrower stepped shaft, hollowed out by a continuous axial through-hole.
- Overall Length: 100 mm
- Top Section: Ø 28 mm × 65 mm length
- Bottom Section: Ø 14.5 mm × 35 mm length
- Through-hole: Ø 6.6 mm
Images
More like this
Explore more in Workshop & Tools →
Karcher 100mm Hose Adapter
A tapered reduction adapter designed to connect a 35 mm Karcher vacuum hose wand to a standard 100 mm dust collection hose. The profile features sweeping continuous curves rather than hard angles, eliminating sharp internal corners that catch dust and providing a smooth external aesthetic. The thick walls hold up under heavy shop use. Small End: Tapers internally from 35.5 mm to 34 mm for a wedge-fit on Karcher wands. Large End: Tapers externally from 99 mm to 101 mm to fit tightly inside 100 mm flex hose. Overall Length: 130 mm.
28mm — Tapered Syringe Adapter
A specialized dual-ring tool designed to connect a small tapered syringe (5–6 mm) to a 28 mm bottle neck. Features Bottle Bore: 28 mm with a straight 8 mm snap-on cutout, finished with rounded entry tips. Syringe Bore: Tapered from 5 mm at the bottom to 6 mm at the top, ensuring a snug fit. Bridge: A short 6 mm tapered solid bridge connecting the two mounts smoothly. Branding: "SE Tool" engraved directly onto both side flanks of the tapered bridge.
Shop Vac Tool Dust Adapter
Hoses slip off power tools exactly when the cut gets deep, throwing sawdust everywhere. This adapter steps a standard shop vacuum hose down to a small tool port and features ribbed clamping zones so a hose clamp actually bites and stays put instead of sliding off the smooth plastic. Critical Dimensions Vacuum Side: 31.5 mm outer diameter (designed to fit inside a 32 mm vacuum hose). Tool Side: 25.5 mm inner diameter (designed to slip over a 25 mm tool port). Insertion Length: 30 mm deep clamping area on both ends. Wall Thickness: 2 mm solid walls to withstand heavy clamp pressure without crushing.
Cylinder Weight With Post
What it's for A heavy cylindrical base with an extended center post, designed to act as a tether point, weight, or hanging anchor in the workshop. Dimensions Base: 4 inches (101.6 mm) diameter, 2 inches (50.8 mm) tall. Post: 1 inch (25.4 mm) diameter, extending 3 inches (76.2 mm) above the base. Hole: 0.4 inches (10 mm) diameter, positioned near the top of the post for rigging lines or carabiners. Materials Print with dense infill (at least 60%) if being used as a counterweight. PETG or ABS is recommended for impact resistance.
3-Inch Tool with Handle
A heavy-duty pounding or tamping tool, dimensioned strictly to a 3-inch diameter base and a 1-inch diameter grip. Dimensions to Check Base Profile: 3.0" OD x 2.0" Height Grip Profile: 1.0" OD x 3.0" Height Hanger Hole: 0.375" (3/8") through-bore centered 0.5" from the top of the handle. Prints flat on the base. Requires no supports.
small Bottle Syringe Clip
A custom-sized double ring designed to couple a 14.5 mm syringe to a 31 mm bottle neck. Syringe bore: 14.5 mm with an 8 mm front insertion slot Bottle bore: 31 mm (snaps on via a 22 mm back slot) Clearance: 4 mm bridge spacing The branding is now recessed 0.6 mm directly into the bottle ring's inner wall, keeping the outer profile completely flush. Check your syringe outer barrel measurement before running this.