150mm Borg Friendship Vault
Created today
Remixed once
Description
Zak's Borg Friendship Vault. Three-piece print, designed to drop in and seat clean without fasteners.
- Overall Footprint: 150mm x 150mm.
- Total Height (Assembled): 145mm.
- Internal Payload Bore: 65mm diameter x 105mm depth.
- Cage Windows: 90mm span, designed to bridge flat across the top without support on well-calibrated machines.
The top cap runs a 118mm square boss to locate itself on the outer frame, plus a 64.5mm cylindrical plug to lock into the core and prevent horizontal slop. Print the outer cage and cap in black PETG; run the core in fluorescent PLA. Keep your cooling aggressive for the long window bridges.
Photos
Technical views
More like this
Explore more in Storage & Organization →
104-Cell AA Battery Vault
This heavy-duty grid vault keeps 104 AA cells locked down and separated. The front closure uses a single wide flex-arm cantilever built straight into the lid. It swings down to snap automatically over a retaining ledge on the base, holding the lid firmly shut until you pull the finger grip outward. Clearance: 0.4 mm gap on all latch and hinge mechanisms Lid Mechanism: Print-in-place folded hinge Print Layout: Prints fully open and flat on the bed
Archiv-Einschub: Schiffe versenken
Ein maßgefertigtes, modulares Schubladen-Regal für Brettspiele und Kartensets (hier ausgelegt auf 150 x 45 mm Boxen). Das Set besteht aus drei Teilen: Regalgehäuse: Eine stapelbare, robuste Außenhülle mit Fase. Schublade: Passgenau mit 0,8 mm Spielraum zum einfachen Herausziehen. Ein Griff an der Front erleichtert das Greifen. Inlay-Buchstaben: Die Schrift ist als 1,5 mm tiefe Aussparung in der Frontplatte angelegt. Die separat gedruckten Buchstaben sind minimal verkleinert (0,15 mm Toleranz) und können nach dem Druck passgenau in die Front eingedrückt werden. Ideal für ein aufgeräumtes Regal, bei dem man jedes Spiel sofort auf der Frontblende erkennt.
Garden Hose and Nozzle Hanger
What it's for A wall-mounted storage bracket designed to hold a standard 15-meter garden hose outdoors. It features a wide saddle for the main coil and an integrated upper bracket with a U-slot to suspend a spray nozzle securely, keeping it off the ground and out of the dirt. Dimensions Main Hanger: 200mm wide, extending 120mm from the wall to support bulky hose coils. Overall Height: 260mm tall backplate. Mounting: Three vertically aligned countersunk holes (12mm head clearance, 6.5mm shaft). Nozzle Slot: 28mm wide U-shaped cutout positioned 70mm above the main hanger. Remix ideas Modify the nozzle slot diameter to fit specific quick-connect fittings or larger spray guns. Adjust the mounting hole spacing to align with specific mortar joints or siding panels. Extend the main shelf depth and retaining lip height to accommodate a 30-meter hose.
Apache 2800 DS18 Speaker Ring
Adapts the factory grid structure of an Apache 2800 equipment case lid to accept a standard DS18 8-inch audio driver. Host Mating Surface: Drops directly over the factory 2800 grid ribs via 6.5mm deep rear clearance channels. Do not use if you have already shaved the case lid. Driver Fitment: Features a standard 182mm inner basket bore and a 197mm bolt circle. Standoff: Provides 12mm of total lift off the lid plane. Ensure your driver depth clears the case base when closed.
Under-Mattress Bedside Tray Caddy
Built for bedrooms with zero floor space for a nightstand. This caddy slides a 180mm paddle directly under the mattress, dropping a functional 180x120mm tray over the side of the bed frame. It features a recessed 70mm ring with a raised lip to secure a glass of water, plus a dedicated rear slot angled at 12 degrees to keep a phone visible and upright. Remix Parameters Riser Drop: The vertical riser is currently 60mm. Extend this dimension if a specific bed frame has exceptionally tall side rails that the tray needs to clear. Paddle Length: At 180mm, the under-mattress flap provides baseline leverage. Stretch it to 250mm or widen the base for heavier loads or thicker, softer mattresses. Surface Layout: The tray is an open 180x120mm canvas. The 70mm drink ring and phone slot can be mirrored for opposite-side beds, or swapped out entirely for modular charging pucks and glasses trays.
Standard 140x40 Gehäuse
Gehäuseunterteil mit Außenmaßen 140 x 40 x 25 mm und 3 mm Wandstärke. Passung: Der Deckel hat eine Innenlippe mit 0,5 mm Gesamtspielraum (0,25 mm pro Seite). Druck: Beide Teile liegen flach auf dem Druckbett (Deckel liegt auf der Oberseite) und benötigen keine Stützstrukturen. Kapazität: Innenraum misst effektiv 134 x 34 x 22 mm.