Phoen
Created today
Description
A car phone holder built around a robust 12mm deep five-point star backplate. Fully rotating via a standard 17mm socket ball, this cradle features deeply pocketed bottom hooks and wraparound side arms designed to safely encapsulate heavy devices like an iPhone 15 Plus.
- Fitment: Wide 88mm interior span fits iPhone 15 Plus with standard cases.
- Mounting: Standard 17mm ball joint interfaces directly with generic dash and vent sockets.
- Restraint System: 4-point captivity (two lower shelves, two wraparound side grips) stops forward-tip during hard braking.
- Orientation: Rotates 360 degrees on the mount ball for landscape or portrait viewing.
Images
More like this
Explore more in Automotive, RC & Hobby →
P
A rigid dash mount built to exactly fit an 80x160mm phone. Features a minimalist capture system: the phone slides in vertically and is retained by four small 11mm corner cuffs. The cuffs feature a deeply cut geometric star framed by a shallow 0.5mm engraved swirl. A rigid 2mm backstop spans the bottom cuffs to prevent the phone from slipping through. Footprint: 80x160mm exterior Retention: Four slim corner cuffs (top-loading) Mount: Standard 17mm ball joint (fits common dash and vent sockets) Detailing: Engraved swirls over star cutouts
Retro TV Enclosure for No-Solder RP2040 Builds
A two-piece retro TV shell designed to house a no-solder RP2040 video player. The clamshell locks together with a built-in snap fit, offering exactly 150×80×50mm of internal space. Both halves print flat on the bed without supports. Front Bezel: Features a sloped CRT-style screen cutout with an internal ledge for a 2.8" display, twin 7mm dial holes, and integrated speaker vents. Back Shell: Includes a bottom-edge USB-C cutout and classic rear cooling vents. Snap Fit: A 4mm friction lip with interlocking bumps holds the enclosure securely together.
Space Command Console Toy
The keyboard belongs to you. The TV remote belongs to you. The oven dials are strictly off limits. But they still want to press buttons, and everything they reach for has a consequence. This console solves that. It’s a chunky, slanted control panel built to take a hammering. The throttle is a captive slider that prints fully in place—no assembly, just crack it loose and it glides. The giant red and green buttons sit on thin printed hinges, giving them enough flex to feel like a real press without needing actual springs or hardware. The dials and radar screen are solid topographic features that add tactile feedback without weak points. Printing Notes Dimensions: The base fits squarely on a 180x130mm footprint. Print-in-Place Clearance: The slider runs in an internal T-slot with a generous 0.5mm clearance on all sides, making it easy to free up on almost any FDM machine. Orientation: Designed to sit entirely flat on the build plate. The 13-degree slope of the panel is built into the geometry, so the internal bridges and tracks print parallel to the bed. Settings: Standard 0.2mm layer heights work beautifully. Three perimeters recommended to keep the compliant button hinges tough.
Squarebody Pickup Frame and Shell
A slab-sided late-70s Ford pickup shell in the squarebody mould, paired with a 4x4 ladder frame. The body has a flat hood, upright windshield, boxy cab with a flat roof and a straight-sided bed, with square wheel openings at both axles and a slotted grille. Design notes Body prints separately and sits over the frame on four pinned mounts Underside is open so it drops over the rails Frame has arched rails, shock towers, battery cradle and electronics plate Pairs well with a two-tone paint job
Passat B6 Console Cup Holder 1.2v
A drop-in dual cup holder insert designed to fit the console space next to the handbrake in a 2006 Volkswagen Passat B6. The wedge-shaped body maintains a flush, horizontal top surface while following the sloped floor of the compartment underneath. Fitment: 180mm x 105mm footprint, tapering from 90mm down to 55mm in height. Capacity: Two 75mm diameter slots. The forward slot runs 75mm deep, and the rear slot sits 60mm deep to accommodate the console's slope. Features: Flared top lips for easy alignment, internal bottom fillets, and 5mm center drainage holes to handle condensation. Tolerances: Generous minimum wall and floor thicknesses (≥4mm throughout) ensure structural rigidity without requiring internal supports.
ArachnoLock — Terrarium Hatch
An ultra-secure, screw-to-seal hatch system designed for terrariums with a 50mm pre-drilled feed hole. The three-piece design sandwiches the 5mm glass top to stay permanently in place, offering a heavy-duty threaded plug that no occupant can muscle through. Features Captive Setup: A flanged collar and a locking nut clamp firmly across the glass thickness. Tapered Seal: The screw cap seats into a matching taper, ensuring a zero-play, gapless seal. Integrated Lid Handle: The 25mm high grip block provides enough purchase to unscrew the cap or lift the entire terrarium panel. Spider-Proof: Sturdy 3mm threads and a flush seal mean nothing pushes its way out. Dimensions Fits hole: Ø 50mm Clamps to plate thickness: 5mm Thread size: M49x2.5 (Collar), M40x3 (Cap)