250mm Cupboard Pot Lid Rack
Created 15 days ago
Description
A deck-mounted rack for filing kitchen pot lids upright. The 250mm footprint sits squarely on a countertop or fastens directly to a cabinet floor, utilizing a 100mm backstop to brace the lids against tipping.
Fitment and Clearances:
- Mounting Interface: Drilled with four countersunk holes sized for standard #8 flathead wood screws.
- Required Footprint: 250mm wide by 140mm deep. Verify your internal cabinet depth and ensure clearance for the door swing before fastening.
- Lid Capacities: Features five graduated bays stepping from 35mm to 56mm wide. Measure your lids at their deepest point—this rack will not accept high-dome stockpot lids exceeding a 56mm depth.
Photos
Technical views
More like this
Explore more in Kitchen & Bathroom →
Mason Jar Fly Trap Lid
Leaving a bowl of vinegar on the counter just means you eventually knock over a bowl of vinegar. This insert replaces the flat lid in a canning ring to turn any jar into a one-way trap Diameter: 84 mm (fits the ring). Depth: 35 mm funnel projection into the jar. Exit Aperture: 4 mm (wide enough to enter, too narrow to navigate back). Printability: The flat face sits on the bed. The funnel tapers upward. Zero supports needed.
Wall-Mount Paper Towel Brackets
A two-piece mounting bracket system designed to hold standard 11-inch (280mm) paper towel rolls. The split design allows you to install it under cabinets or flat against a wall at whatever width fits your specific brand of towels, while the oversized hubs keep the roll spinning freely without dropping. Specifications Clearance: Designed with a 95mm reach to clear standard and jumbo rolls. Hub Size: 34mm core with a 39mm chamfered retaining lip. Mounting: Two counterbored screw holes per bracket (fits #8 or 4-5mm wood/drywall screws). Printing: Both brackets are designed to print without supports when laid flat on their outer sides.
130mm Ribbed Pumpkin with tray
A heavily lobed, pumpkin-shaped planter designed for small to medium houseplants. The outer ribs are deeply pronounced for a natural gourd look, while the interior cavity accurately follows the same scalloped shape to maintain uniform wall thickness and maximize soil volume. The top and bottom are cleanly sliced—giving it a flat, stable base that won't rock and a wide top opening for easy planting. The base features a 10 mm central drainage hole surrounded by five 8 mm radial holes to prevent root rot. Dimensions & Setup Outer Diameter: 130 mm at the widest point Height: 85 mm Wall Thickness: ~4 mm Printability: The bottom 10 mm of the natural sphere is trimmed off to ensure the starting overhangs are gentle enough to print entirely without supports.
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
River Stone Chopstick Rest
A minimalist chopstick rest modeled after a smooth, weathered river stone. The organic shape grounds the table setting, while a gentle saddle cut across the top cradles your utensils securely to prevent rolling. Design Notes Flat base for stability on the table Smooth, sweeping top cut prevents rolling Organic, asymmetrical shape for a natural aesthetic