36mm Bore Honeycomb Egg Dispenser
Created today
Description
An upright, gravity-fed egg dispenser scaled for a 36mm bore, fitting quail or small pullet eggs.
- The Fitment: 36mm internal width. This will immediately jam on standard grocery store Grade A Large eggs.
- The Structure: Uses a 1.8mm solid-web honeycomb shell to reduce material use without sacrificing structural rigidity or leaving isolated printing islands.
- The Feed: Features an internal 18mm high sloped ramp leading down to an arched dispensing port.
Images
More like this
Explore more in Kitchen & Bathroom →
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
Farmhouse Fowl Egg Cradle
A stylized, softly rounded chicken figure designed to serve as a breakfast egg cup or countertop display. The back features a contoured recess sized to securely cradle a standard large chicken egg, resting on a flat base for stability. Design Notes Capacity: Holds one standard large egg (up to ~45mm diameter). Printability: The base is cut perfectly flat to sit on the build plate. The egg recess curves gently upward to avoid steep internal overhangs. Assembly: Modeled as a single solid piece; the colored regions are for visual reference and multi-material painting.
Ribbed Bathroom Pot
Tall, top-heavy bathroom items have a habit of tipping over or leaving residue on the counter. This ribbed pot is built with thick walls to stay put, corralling toothbrushes, razors, or makeup brushes so they stop sliding around. Fit & Print Outer diameter: 80 mm Height: 100 mm Internal diameter: 72 mm Features: The inside base has a 4mm fillet (a smooth curved transition) instead of a sharp corner, so toothpaste or dust can't get permanently stuck in the bottom rim. Printing: Prints straight on the bed. No supports required.
Flowing Kitchen Organizer Tray
A premium, single-piece kitchen and desk organizer engineered specifically for support-free FDM printing. The design integrates distinct vertical storage and a sweeping transition into a shallow tray, tied together by a heavy, stable base. Features Rear Compartments: Two independent 128mm tall pockets with 2mm structural walls for heavy utensils. Front Storage: A 65mm tall tool cup and a swooping front-right spoon rest with an organic basin curve. Phone Interface: Twin central resting rails angled at 20 degrees with a dedicated front base cable notch. Printability: 100% support-free geometry with rounded external corners and thick 12-16mm solid base floors to prevent tipping.
Bulk Floss Spool Dispenser
What it's for A two-part refillable dispenser designed to house standard bulk dental floss spools. The enclosure features a fluted exterior for secure handling and a tapered friction-fit lid with a thumbnail slot for easy reloading. A 1.5 mm side exit channel guides the floss to a sharp, wedged V-notch on the upper rim, allowing for clean tears without requiring a separate metal cutting insert. Dimensions Internal Chamber: 40.5 mm diameter by 12.2 mm deep, accommodating standard 40x12 mm bulk spools. Center Axle: 5 mm diameter, 12 mm tall. Overall Footprint: 46 mm external diameter by 16 mm tall. Remix ideas Resize the central axle to fit non-standard spool cores. Adjust the internal chamber depth for larger commercial floss reels. Swap the fluted exterior for a heavy knurl. Modify the exit hole diameter to accommodate thicker woven floss or tapes.
Mason Jar Fly Trap Lid
Leaving a bowl of vinegar on the counter just means you eventually knock over a bowl of vinegar. This insert replaces the flat lid in a canning ring to turn any jar into a one-way trap Diameter: 84 mm (fits the ring). Depth: 35 mm funnel projection into the jar. Exit Aperture: 4 mm (wide enough to enter, too narrow to navigate back). Printability: The flat face sits on the bed. The funnel tapers upward. Zero supports needed.