4-Slot Electric Toothbrush Holder
Created today
Description
A wall-mounted organization solution designed specifically for larger electric toothbrush handles. The structure provides dedicated storage that keeps brushes secure and accessible while protecting surrounding bathroom surfaces. A built-in shallow tray catches runoff, preventing water from streaking down tiles or pooling on countertops.
Key features of this design:
- Four 30mm slots sized to comfortably drop in chunky grips, including Oral-B and Sonicare models.
- Recessed lower drip tray to capture water and toothpaste residue.
- Two countersunk mounting holes positioned for stable installation against the wall.
- Open clearance between the shelf and tray to allow wet handles to dry efficiently.
Images
More like this
Explore more in Kitchen & Bathroom →
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
Ribbed Bathroom Pot
Tall, top-heavy bathroom items have a habit of tipping over or leaving residue on the counter. This ribbed pot is built with thick walls to stay put, corralling toothbrushes, razors, or makeup brushes so they stop sliding around. Fit & Print Outer diameter: 80 mm Height: 100 mm Internal diameter: 72 mm Features: The inside base has a 4mm fillet (a smooth curved transition) instead of a sharp corner, so toothpaste or dust can't get permanently stuck in the bottom rim. Printing: Prints straight on the bed. No supports required.
Slotted Arch Napkin Holder
A modern, pill-shaped ribbed napkin holder designed to maximize footprint while minimizing print time. The wide stance prevents tipping, and the skeletal ribbing drastically cuts down on plastic use while maintaining structural rigidity. Remix Hooks Slot Width & Spacing: Currently set to 6mm slots spaced 12mm apart. Widening the slots makes for an even faster, more airy print. Wall Thickness: Built with 3mm walls, balancing speed and durability. Can be thickened for a heavier base. Top Sweep: The curved top dip (cut by a 180mm cylinder) can be flattened or deepened depending on the size of the napkins it needs to hold. Base Tub: The bottom 15mm is solid to catch crumbs and anchor the napkins securely.
Freestanding Dual Roll Holder
A freestanding, vertical storage post for two spare toilet paper rolls. Built to sit directly on the floor or a countertop. Remixing and Dimensions Capacity: The central stem is 190mm tall, which comfortably holds two standard 110mm-wide rolls. Base: 140mm diameter footprint with a sloped transition to anchor the post and prevent tipping. Printer compatibility: Total height is ~232mm, designed specifically to max out—but still fit—a standard 250mm Z-axis print volume (like an Ender 3). If you have a taller printer (e.g. 300mm+), extending the stem by 115mm increments will add capacity for a third or fourth roll.
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
Angled Travel Mug Drying Rack
A countertop drying rack with a built-in 270x180mm drip tray, designed to hold washed bottles and travel mugs upside down. The six pegs are angled at 15 degrees to ensure trapped water drains out entirely, preventing stagnant moisture and bottle funk. Starting Parameters Peg layout: Set at an 85mm pitch on the X-axis and 90mm on the Y-axis. Expand this grid if accommodating oversized vacuum flasks or wider mugs. Peg dimensions: Currently 100mm long and 12mm thick, sunk into 22mm base bosses for leverage resistance. Extend the Z-length for tall carafes or increase the thickness if printing in a brittle filament. Drainage: The 15mm high outer wall keeps runoff contained. A remixer could slope the inner tray floor or add an edge spout for direct sink drainage.