60mm Print-In-Place Concentric Gyro
Created today
Description
A four-ring concentric gimbal toy designed for fully assembled printing. The rings pivot independently on alternating axes using built-in conical hinges. All exterior edges are rounded for comfort.
- Clearances: 0.5 mm radial and axial gap between all moving surfaces.
- Overhangs: Conical pivots operate at a 45-degree angle, requiring no supports.
- Base: Rings are coplanar at z=0 to ensure solid bed adhesion.
- Dimensions: 60 mm outer diameter, 12 mm overall thickness.
Images
More like this
Explore more in Keychains & EDC →
Orbital Gyro Fidget
A four-stage concentric gyroscope built to spin freely straight off the build plate. The rings alternate their pivot axes, allowing the core to tumble smoothly in three dimensions while the outer frame stays anchored in the hand. The clearances are set tight enough to keep the action crisp, but loose enough to break free with a single twist after printing. Construction Details Print-in-Place: Internal spherical pivots bridge the air gaps without requiring supports. Tolerances: Features a uniform 1.5mm air gap between rings and 0.5mm radial clearance on all internal ball joints. Edges: Chamfered top and bottom profiles prevent elephant's foot from fusing the rings and offer a softer feel.
Captive-Pea Emergency Keychain Whistle
A 50mm print-in-place emergency whistle built around a 12mm spherical resonating chamber. It features a tapered mouthpiece and an integrated 7mm captive pea that creates a high-decibel warble, all packed into a low-profile keychain block. Remix Hooks & Constraints Chamber Geometry: The fundamental tone is dictated by the 12mm sphere. Expanding this chamber lowers the pitch, while shrinking it creates a sharper, higher shriek. Captive Pea: The 7mm pea prints with a 0.2mm floor gap. This clearance is just tight enough to prevent the sphere from tearing off the build plate, but weak enough to break free with a pen tip. Windway & Fipple: The air channel is fixed at 1.5mm high to compress the airstream before it hits the 45-degree splitting edge. Changing the fipple angle will dramatically alter the sound quality. Mounting Loop: The 5mm bore at the rear fits standard split rings and 550 paracord. If scaling the model for a heavier carabiner, reinforce the tail block first.
Chunky Modern Type Keychain
A solid, pocket-sized keychain featuring a custom typographic design. The base perfectly contours the bold lettering, creating a clean and modern silhouette that feels sturdy in hand. Pocket-Friendly Size: Scaled down to slide easily into a pocket without snagging. Sturdy Build: A solid 5 mm base prevents flexing, with 2 mm raised lettering that holds up to daily wear. Ready to Mount: Features a fully through 5 mm keyring hole to accommodate standard rings or small carabiners.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.
Flush Face Bean Fidget
What it's for A pocket-sized fidget shaped like a standing bean, designed to house a standard Cherry MX mechanical keyboard switch. The face plate acts as an oversized keycap, sitting flush within the body's front pocket when at rest, and depressing smoothly inward when clicked. Dimensions Overall Assembled Size: ~36 x 24 x 50 mm Switch Fit: Standard 14.1 mm friction-fit MX socket with bottom clearance for the center pin. Face Cap Tolerance: 1 mm gap around the perimeter of the face plate to ensure frictionless travel inside the pocket. Assembly Snap an MX switch into the back of the body cavity. Press the face plate's rear stem bracket firmly onto the switch's cross stem. No glue required if tolerances are dialled in on your printer.
Horizontal Fidget Tower
hi