Aura — Fitted Twisted Pendant
Created today
Description
Introducing the Aura pendant shade, strictly tailored to fit on standard 210mm print beds. The flowing, twisted ribbons form a striking teardrop silhouette, capturing light and shadow with an elegant, organic feel.
Dimensions & Specs
- Scale: Fits comfortably within a 210mm cube (205mm height, 200mm maximum diameter).
- Structure: 32 spiraling ribs, reinforced to a robust 1.8mm width for a full, sturdy profile that prints without supports.
- Mounting: Built with a standard E27 pendant socket ring at the top and a wide-open base for clean downward lighting.
Designed to be printed as a single, durable piece.
Images
More like this
Explore more in Home & Fixtures →
E27 Twisted Crystal Shade
Twisted pendant lamp shade with a spiraling ribbed exterior and a smooth, thin-walled interior to diffuse light. Mating Surface: 43mm through-hole with a flat 4.8mm-thick solid collar. Built for standard E26/E27 threaded pendant sockets. Clearance: Inner ceiling leaves a flat bridge for the socket nut to seat cleanly against. Wall Thickness: The base membrane is exactly 0.8mm thick (prints as two solid perimeters on a 0.4mm nozzle). Ribs: 16 twisted ribs, tapering from 4mm thick at the base down to 2mm near the mount for structural rigidity without blocking light in the valleys. Dimensions: 168mm wide at the opening, 160mm overall height. Prints upside-down (large opening on the bed) without supports.
Anti-Spill Armrest Caddy
Sofa arms are basically designed to launch drinks onto the rug the second you shift your weight. This drops a rigid U-channel over the armrest to bridge the gap, locking down a flat staging plate on one side and a deep cup holder into the other. Specifications Total Length: 200 mm Inner Channel Width: 185 mm (verify this clears your sofa arm) Cup Holder: 80 mm diameter, 32 mm depth Print Specs: Prints hollow to save time and material. No supports needed if your bridging is dialled in.
Halo Drip Irrigation Ring
This is a low-profile, continuous-loop irrigation ring designed for automated watering systems. It distributes water evenly around the base of a plant without interfering with the stem. The structure is engineered specifically for FDM printing without supports. The internal hollow channel features a teardrop cross-section so the printer can bridge the ceiling cleanly, and the external hose barb includes a small, built-in support block connecting it to the build plate. Design Notes Dimensions: 197 mm outer diameter, 173 mm inner diameter, leaving a 12 mm wide profile. Inlet: Dual-barb fitting sized for 5 mm internal diameter tubing, pointing outward to keep the hose clear of the foliage. Distribution: 12 downward-facing 1 mm drip holes spaced every 30 degrees, beginning 15 degrees offset from the inlet to ensure the first drops don't pool at the connection. Mounting: Three low-profile tabs sit on the outer perimeter, drilled for standard wire pegs to anchor the ring into the soil.
4-Way Water Manifold
A compact, print-in-place water manifold built for automated plant irrigation systems. It splits a single main feed into four independent channels with smooth internal transitions to minimize flow restriction. Inlet: Single center-mounted fitting sized for 8mm ID hose. Outlets: Four equally-spaced fittings sized for 5mm ID hose. Barbs: Dual retaining ridges on all connections to prevent slip-offs under pressure. Internal Channels: Fully hollowed 7mm common chamber with spherical transitions to eliminate dead zones and sharp fluid corners.
CluckFlow — Gravity Waterer Cap
New chickens bring endless questions, but a reliable water supply doesn't have to be one of them. CluckFlow is a gravity-fed waterer cap that threads directly onto a standard bucket or heavy-duty jar, instantly converting it into an automatic hydration station for the coop. A smart internal drip-feed port regulates the flow from the main reservoir, ensuring the trough automatically refills as the hens drink without ever flooding. Dimensions Trough: 40 mm continuous drinking width accessible from all sides. Central Feed Tube: 20 mm inner diameter. Collar Thread: 100 mm diameter with a 5 mm pitch, scaled for common bulk containers. Design Features Print-in-Place: The internal bell funnel is steeply angled to bridge the gap between the central feed tube and the outer threaded collar, printing entirely without supports. Self-Regulating: Multiple drip ports ensure constant equalization of the water line.
Circular Scoop Reaching Stick
What it's for A 16 cm tall reaching stick with an open scoop base. Designed to securely push under small items and lift them, with an open front and a curved retaining wall at the back. Dimensions Overall Height: 160 mm Base Diameter: 100 mm Handle Diameter: 16 mm Print notes Prints upright in a single piece with no supports required. Ensure good bed adhesion for the 100 mm base plate.