Chunky Modern Type Keychain
Created yesterday
Description
A solid, pocket-sized keychain featuring a custom typographic design. The base perfectly contours the bold lettering, creating a clean and modern silhouette that feels sturdy in hand.
- Pocket-Friendly Size: Scaled down to slide easily into a pocket without snagging.
- Sturdy Build: A solid 5 mm base prevents flexing, with 2 mm raised lettering that holds up to daily wear.
- Ready to Mount: Features a fully through 5 mm keyring hole to accommodate standard rings or small carabiners.
Images
More like this
Explore more in Keychains & EDC →
Captive-Pea Emergency Keychain Whistle
A 50mm print-in-place emergency whistle built around a 12mm spherical resonating chamber. It features a tapered mouthpiece and an integrated 7mm captive pea that creates a high-decibel warble, all packed into a low-profile keychain block. Remix Hooks & Constraints Chamber Geometry: The fundamental tone is dictated by the 12mm sphere. Expanding this chamber lowers the pitch, while shrinking it creates a sharper, higher shriek. Captive Pea: The 7mm pea prints with a 0.2mm floor gap. This clearance is just tight enough to prevent the sphere from tearing off the build plate, but weak enough to break free with a pen tip. Windway & Fipple: The air channel is fixed at 1.5mm high to compress the airstream before it hits the 45-degree splitting edge. Changing the fipple angle will dramatically alter the sound quality. Mounting Loop: The 5mm bore at the rear fits standard split rings and 550 paracord. If scaling the model for a heavier carabiner, reinforce the tail block first.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.
Flush-Tension Minimalist Wallet
This is a minimalist, print-in-place everyday carry wallet built to hold 5 cards and 10 USD bills without the need for elastic bands or extra hardware. What it's for The wallet features two dedicated compartments separated by a solid central divider. The front slot is sized for up to five standard credit cards, while the slightly wider back slot comfortably holds up to ten USD bills folded in half. Integrated leaf-spring clips are built into the outer walls of both slots, applying constant inward tension to securely grip anywhere from a single bill or card all the way up to full capacity. Features Dual Compartments: Dedicated sizing for both standard cards and folded bills. Integrated Spring Clips: Outer walls act as flush-fitting leaf springs to maintain friction. Thumb Track: A recessed bottom channel allows you to smoothly push your cards and cash up for easy access. Scalloped Top: Deep finger grooves at the top make drawing individual cards simple. Print notes Designed to be printed entirely upright and in place. No supports or assembly are required. For the best spring tension and longevity on the clips, a material like PETG or ABS is highly recommended.
Stenhus Gymnasium Nøglering
En robust nøglering med Stenhus Gymnasiums navn sat op i blok-format (hvor linjerne er tvunget til samme bredde), og et dedikeret svunget bølge-symbol i venstre side med vandrette afskæringer i top og bund. Mål: Basen er 90 x 30 mm med afrundede hjørner og et forstærket hul til nøgleringen. Relief: Både tekst og logo løfter sig diskret 0,6 mm fra basen, hvilket giver et skarpt print uden at det griber for meget fast i lommen. Tekst: Ordene er sat med Roboto, hvor bunden er skaleret for at give et balanceret, tungt udtryk.
Mickey Lip Balm Keychain
A whimsical, two-piece threaded capsule designed to hold a standard tube of lip balm. The design features a screw-on top shaped like a familiar mouse character with a built-in keychain loop for easy carry. Remixing this model Bore size: The internal cavity is 17.5mm wide, perfect for standard chapstick. Expand this if your preferred brand uses a wider tube. Thread clearance: Printed threads are built with a 0.6mm clearance to turn smoothly right off the bed. Alignment: When screwed shut, the character's face might not perfectly align with the buttons due to thread timing. A light sanding on the lip of the base will let you dial in the exact stopping point.
Football Keycap Topper
A custom Cherry MX-compatible mechanical keycap featuring a gently domed top and recessed seams, channeling the look of a classic basketball. Built from the ground up to respect a precise 17.25mm footprint, it trades the standard typing dish for a smooth, tactile convex surface. Court-Ready Specs Switch Profile: Deep Cherry MX compatible stem with a flared entrance for an easy press-fit. Surface Feel: A smooth domed top intersected by 0.6mm-deep recessed channels tracing the iconic hoops cross-and-arc pattern. Dimensions: Exact 17.246 mm square footprint at the base, tapering cleanly up to the rim. Printability: Designed fully manifold with built-in internal bracing ribs. The bottom cross interface is lightly chamfered to combat elephant's foot and ensure tight tolerances straight off the bed.