Cozy Silhouette Sitting Kitten
Created 1 months ago
Description
A stylized, geometric sitting kitten with a curled tail tucked around its paws. Built to be entirely support-free, the shape merges softly rounded volumes for the body, head, and upright ears, wrapped with a classic collar and bell detail.
Printing Notes
- Supports: None needed. The base is flat, the ears taper cleanly, and the tail overhangs are fully supported by the build plate.
- Infill: 10-15% is plenty.
- Sizing: The design is small and desk-friendly, but scales up nicely for a bookshelf statement piece.
Images
More like this
Explore more in Decor & Display →
Reeded Table Lamp
A modern reeded table lamp designed to stand independently on a desk, nightstand, or cabinet. The design has been re-proportioned to be shorter and wider, offering a grounded, substantial look. Customization & Assembly Main Shade: Measures 130mm tall and 140mm wide, heavily textured with vertical reeds. It simply slides over the base lip. Base Stand: Sits flat on the table with a 25mm height. It features a standard 42mm hole for an E27 socket and a discreet bottom channel for cable routing. Top Diffuser: A drop-in cap that hides the bulb and softens the upward light. All three pieces are designed to be printed easily without supports. The modular drop-in fit makes swapping bulbs or modifying the shade's color later straightforward.
Ivory Folded Ceramic Vases
A trio of statement centerpiece vases designed with deep organic grooves, sweeping necks, and soft ivory tones. Each piece balances a minimalist ceramic aesthetic with flowing, fabric-like curves, ready to print as functional tabletop decor. Low Spiral Vase: A wide, dramatic base that twists upward through 140 degrees into a slightly offset neck. Tall Wavy Vase: The anchor of the set, standing 210 mm tall with crisp vertical ribs and a gentle 45-degree rotation. Asymmetric Curved Vase: A sweeping swan-like profile that leans dynamically off-center with a reverse twist. Print Notes: Designed to be printed in standard FDM standard mode (hollowed out with 2.5 mm walls, rather than vase mode) for maximum rigidity and heft. No supports required. Ensure your print bed is well leveled to anchor the large flat bases securely.
Olivier Asymétrique Penché
Un arbre sculpté au profil asymétrique avec une inclinaison marquée, conçu pour s'imprimer à plat sans supports. Le tronc s'oriente fortement vers la droite tandis que la canopée a été réduite du côté gauche. Les branches secondaires côté droit ont été supprimées pour accentuer la silhouette asymétrique balayée par le vent. S'imprime à plat en une seule pièce ; vérifiez que la taille convient à votre plateau de 150 mm.
150mm Layered Sailboat Emblem
A stylized, multi-layered 3D sailboat emblem built from crisp geometric sweeps. The design sets a long, sweeping hull against towering, detached triangular sails, with the entire structure sitting atop three separated, flowing wave ridges. Features stepped heights across the elements to create a sharp depth effect, completely flat on the back for easy mounting or wall display. Print Guidelines Orientation: Print flat on its back. Supports: None required (fully chamfered/beveled surfaces). Clearances: The waves and sails feature distinct gaps built directly into the geometry.
250mm SnowGoobers Relief Plaque 7
A 250mm display plaque featuring extruded "SnowGoobers Inc." text and an integrated 3D relief of a low-poly snowboarder performing a boardslide. Built as a single-piece extrusion. Fitment Notes Overall Width: 250mm standard base plate. Clearance: Check Z-height clearance; the rider and rail extend up to 47mm off the plate. Mounting: Flat back surface suitable for adhesive strips or drilling custom mount holes. No pre-tapped bores are included.
