D-Shaft to Hex Motor Adapter
Created yesterday
Description
A rigid drive adapter connecting a standard D-shaft motor to a hexagonal RC wheel hub. The base features a keyed socket to prevent slip under torque, while the driven end seats into the tire's existing recess.
- Overall Length: 25 mm
- Motor Socket: 6 mm diameter with a 3 mm flat profile, 10 mm depth
- Wheel Drive: 5.2 mm flat-to-flat hexagonal peg, 10 mm length
- Base Diameter: 12 mm for structural wall thickness around the socket
Images
More like this
Explore more in Automotive, RC & Hobby →
5mm Hex to D-Shaft Adapter
Adapter coupler designed to bridge a D-shaft DC motor and a hex-hub wheel. Built to a total length of 30mm, featuring a dedicated socket for the motor shaft and a hexagonal drive peg for the wheel. Motor Socket: Sized for a D-shaft with a 3mm flat (assumes a standard 4mm overall shaft diameter). Depth allows for a 10mm long shaft. Wheel Drive: Hexagonal peg scaled to 4.8mm across flats to provide sliding clearance into a rigid 5mm hub. Clearances: Includes 0.2mm offsets on all critical mating surfaces for standard FDM printing tolerances.
Aero H-Frame Brushless Motor Stand
Bu parça, fırçasız (brushless) drone motorlarının itme gücünü (thrust) güvenle test edebilmeniz için tasarlanmış statik bir tezgah standıdır. Gövdesi itme kuvvetine karşı esnememesi için arka destek takozuyla güçlendirilmiş H profilli bir tabandan oluşur. Modüler Yapı: Motorun takıldığı ön plaka ana gövdeden bağımsızdır. Şu anki plaka 9mm BCD ve 4 adet M2 vida formatına uygun; ileride farklı motorlar için sadece plakayı değiştirerek kullanmaya devam edebilirsiniz. Boyut ve İzinler: Motor ekseni zeminden 90mm yüksekte konumlandırılmıştır. 80mm çapındaki pervaneleriniz tabana çarpmadan rahatça çalışabilir. Sabitleme: Alt kısımdaki ayaklarda tezgahınıza veya ağır bir ahşap bloğa vidalamanız için 4 adet havşalı M4 delik bulunur. Test güvenliği için standı mutlaka zemine sabitleyin.
9mm PCD Brushless Motor Stand
A clean, streamlined static test mount for brushless electric drone motors. Elevates the motor to provide ample clearance for 80mm propellers while keeping the mass low and the profile minimal. Technical Details Motor Fitment: Designed for a 9mm pitch-circle diameter (PCD) using four M2 bolts. Propeller Clearance: Center height is positioned to comfortably clear an 80mm diameter prop. Mounting Setup: Employs a slim 4mm mounting face, eliminating the need for bulky access tunnels. M2 fasteners can pass straight through from the back. Base Plate: Features an extended footprint with M5 clearance holes for secure fastening to a test bench.
Track-Ready Kart Frame
A half-meter-long go-kart frame complete with a full racing loadout. The chassis features lightweight cutouts along the floor pan and thick side pods for impact resistance, while the cockpit sports a contoured racing seat with aggressive side bolsters to keep the driver planted. Out back, a finned engine block feeds twin rear-facing exhaust pipes. Key Features Chassis Design: Extended floor pan with weight-reduction cutouts and integrated side pods. Racing Seat: Deeply contoured base and backrest with prominent side bolsters. Steering: Three-spoke wheel mounted on an angled column with a solid base support. Powerplant: Rear-mounted block engine featuring cooling fins and dual exhausts. Wheels: Rounded tires with defined center hubs mounted on robust solid axles.
AeroFit — Micro Motor Mount
A lightweight, minimalist motor mount designed to attach micro brushless motors to a standard 3.0mm carbon fiber boom. It prints flat on the bed with no supports required, making it an extremely quick and clean print. Features Carbon Boom Sleeve: Snug 3.0mm inner diameter with a flex slit, allowing it to clamp securely to standard RC plane tail booms. Motor Interface: 9x9mm hole pattern sized for M2 screws, standard for 11xx series micro motors. Lightweight Build: Thin 1.2mm walls keep weight to an absolute minimum while the conical transition fillet maintains structural rigidity. Print Notes Print upright (motor plate flat on the bed). No supports needed. PLA or PETG recommended for stiffness.
Gateway Intake to Combustion Engine Adapter
Adapter connecting a 42.0 mm OD combustion engine fan spigot to a PK360 grill intake vent. Host mating: Snaps into the PK360 stadium-profile intake vent. Component mating: Accepts a 42.0 mm OD pipe (internal bore is 42.5 mm for friction fit). Clearance: Verify your fan outlet measures exactly 42.0 mm before printing.