Ember Flame Sculptural Table Lamp
Created today
Description
A frozen-flame silhouette in the spirit of mid-century modern ceramics: a wide, flared foot that narrows into a tall neck and opens at the crown into three prongs. A tapered, flame-shaped window shows a separate amber diffuser, so the lamp reads as a contained fire when lit.
- Hollow terracotta shell with a flat, stable base
- Open bottom cavity sized for an E26 bulb and socket
- Side wire port near the foot
- Separate diffuser printed in translucent amber or yellow filament
- Print the shell upright; the diffuser prints on its own
Use a low-heat LED bulb to keep the plastic safe.
Images
More like this
Explore more in Decor & Display →
Teardrop Lamp Parts, Terracotta and Wood
A mid-century teardrop table lamp laid out as separate print pieces: fluted base, threaded crown collar, hollow prolate-spheroid diffuser and three dovetail-cleat prongs. A second set of the base, crown and prongs is included in a walnut-style wood tone, so one diffuser works with either finish. Remix hooks Wood finish: the wood set is the same geometry in a different colour. Print it in wood-fill or walnut-toned filament, then sand and oil it. Real grain would need a textured surface, which is a good next step. Fit: the thread clearance is about 0.4 mm and the cleat clearance about 0.3 mm. Adjust these to suit your printer. Bulb: it is sized for a 127 mm T10 or an ST19. The crown bore is 31 mm and the diffuser opening is 36.5 mm. Pairs with: an E26 socket, plus a small glue dab or set screw if you want the cleats locked. The tallest piece, a prong, is about 203 mm, so everything fits a 256 mm bed.
Lamp Bases, Shades and Diffuser Set
A set of mid-century lamp parts that all share one coarse 6 mm-pitch thread, so any shade fits any base. The set has two fluted shades (round and square ribs), a white adjustable diffuser and several bases: tall, short, grooved, two tripods, a flat-leg grooved tripod and a dowel-leg hub. Remix hooks Flat-leg tripod: legs are 16 mm wide slabs (before scaling) with two grooves, 3.2 mm wide, down each outer face. Change the groove count, offset (±4 mm) or width. Leg height and spread: hub height 70 mm and foot radius 70 mm set the splay. Raise both for a taller version. Thread spigot: 52 mm across, 38 mm long. Keep it to stay compatible with the shades. Pairs with: either fluted shade and the diffuser. The 42 mm bore runs straight through for the bulb and cord.
Ember Drake Charizard Mini Figure
A miniature Charizard collectible with a smooth rounded head, snout, small horns and green eyes, plus a cream belly that follows the curve of the torso. Two broad blue-green wings sit on the upper back, and a long tapering tail curves up to a red-and-yellow flame. Design notes Wings, arms and tail sit on captive ball joints with 0.35 mm clearance, so they can swivel after printing. Legs and feet are fixed to the body, which gives the figure a stable stance. Wing membranes are 2.4 mm thick with rounded edges. Colour regions: orange body, cream belly, teal wings, green eyes, red flame with a yellow core.
Sonderkerzen 1.2
What it's for Vier hohle Kerzenkörper in abgestuften Höhen mit Wachstropfen-Optik. Der Boden ist per Bajonettverschluss abnehmbar. Kleine Rastnasen im Verriegelungsschlitz lassen den Verschluss spürbar einrasten, damit er sich nicht versehentlich löst. Dimensions Höhen: 110, 105, 100 und 95 mm Außendurchmesser 45 mm, Innendurchmesser 37 mm Teilung 25 mm vom Boden Vier 1-mm-Löcher, 16 mm unter dem oberen Rand Remix ideas Rastnase höher oder niedriger für mehr oder weniger Haltekraft Andere Höhenstufen Weitere Tropfenmuster
Mandarin Community Town Model
A tabletop town for practising Mandarin place words, where flat labels get lost. Each building, sign and park area carries its Chinese characters, pinyin and English on the front face, so the vocabulary sits right on the thing it names. Details that matter Base: 200 × 200 mm, 4 mm thick plate Buildings: hospital, library, community center, store and school, each 46 × 28 mm footprint Extras: park with pond, road, footpaths, houses, cars, trees, lamps and figures Colour regions: ground, road, walls, roofs, doors, lettering, signs, trees, lawn, pond, paths Print: large bed needed (or scale down); multicolour or paint by region; lettering is 0.8 mm raised, so use a 0.4 mm nozzle