Ergonomic Tube Squeezer
Created 5 days ago
Description
A straightforward, rigid tube squeezer designed for wide tubes like bulk lotions, large toothpaste tubes, or shop greases. The internal slit is precisely sized to slide firmly over the flattened end of a standard or oversized tube, forcing the contents forward without slipping back.
What it's for
- Bathroom: Oversized toothpaste or cosmetic tubes.
- Workshop: Thick silicone, glue, or grease tubes.
- Kitchen: Tomato paste, icing, or food gels.
Dimensions
- Overall Size: 90 mm wide × 32 mm deep × 5 mm thick.
- Slit Size: 63.5 mm (2.5 inches) long × 1.5 mm wide.
- Clearance: The 1.5 mm slit provides a tight pinch to maximize extraction.
Print notes
- Prints flat on its base without supports.
- Requires a rigid material; standard PLA or PETG works perfectly.
- High infill (50%+) is recommended so the piece doesn't flex or snap under heavy squeezing pressure.
Images
More like this
Explore more in Kitchen & Bathroom →
Sleek Flat Tube Squeezer
A minimalist, flat-profile tube squeezer designed to slide over toothpaste or lotion tubes, pushing every last drop to the nozzle. Design Notes Flat Printing: The slot runs completely through the vertical axis, meaning it prints flat on the bed with zero bridging or supports required. Low Material: Thinned down to a sturdy but efficient 5mm profile. Sleek Ends: Aggressively rounded corners make it comfortable to grip and pull. Compatibility: The 70mm slot accommodates tubes up to 42mm in diameter (which spread to ~66mm when flattened).
80mm Tube Squeezer
A heavy-duty tube squeezer sized to clear 80 mm wide tubes. The outer shell is heavily rounded for a comfortable grip while applying torque, and it prints flat on the bed with no supports required. Remix Hooks Slot Gap: Currently set to 1.8 mm. Widen this if you are pushing thick metal paint tubes, or narrow it to 1.2 mm for thin plastic tubes. Overall Width: Built at 108 mm to leave a solid 11 mm wall on either side of the 86 mm slot. Scale the X axis for a different balance between strength and footprint. Thickness: 12 mm deep. Scaling the Z axis changes how much bite it has on the tube and how much leverage it offers.
Tapered Bagel Shell
A bagel shoved into a backpack always turns into a flat puck, and a square tub takes up too much room. This hard clamshell is shaped precisely for the bagel itself—tapering in at the base so it doesn't waste space, with a central mounting cone that keeps the bread from sliding around and slamming against the walls. It prints fully open as one piece, snapping shut with a friction latch. Fit Details Max Bagel Width: 110 mm Max Bagel Height: 45 mm Print Requirements: No supports needed; prints flat on the bed.
Dawn Bottle - 1.7in to 1in Adapter
Adapter designed to mate a 1.0-inch classic cap to the newer 1.7-inch Dawn dish soap bottle neck. Fitment Notes: Base (Female): Fits over the 1.7" (43.18mm) male threads of the new bottle. Sized to 43.8mm inner diameter to provide clearance for FDM tolerances. Top (Male): Provides a 1.0" (25.4mm) male thread for the old cap. Sized to 25.2mm outer diameter so the factory plastic cap won't bind. Pitch: Modeled at roughly 6 TPI (4.23mm pitch), standard for most coarse bottle threads. Printing: The internal ceiling flat-bridges the gap from the wide base down to the 16mm bore. Prints as oriented without supports.
Monolithic Sharps Disposal Vault
With its sheer monolithic walls and severe angles, this disposal vault brings an industrial severity to the bathroom counter. Designed to permanently entomb used safety razor blades, the sealed container features a one-way angled chute that lets sharps slip seamlessly into the void while preventing them from ever sliding back out. A stark hazard triangle and raised lettering stand as a bold warning on the front face. Vault Architecture One-Way Chute: The 25mm top slot plunges sharply downward through an 8mm solid ceiling, ensuring blades cannot escape. Support-Free Core: Optimized internal roof geometry allows the vault to print cleanly without internal supports. Permanent Enclosure: Fully sealed by design, preventing accidental spills or tampering once a blade is deposited.
Pepper Grinder Funnel
A custom-fit funnel designed specifically for filling pepper grinders without spilling. The spout is sized at 29mm to comfortably clear a 31mm fill hole, while the wide bowl catches everything you pour in. Features: Steep Bowl Angle: Designed so whole peppercorns slide down easily without jamming. Wide Spout: The 25mm internal diameter allows large peppercorns to pass freely. Compact Height: Kept to 58mm overall, fitting easily into crowded kitchen drawers. Support-Free: The overhang angle allows it to print cleanly without supports in either orientation (though printing it upside-down on the wide bowl is recommended for bed adhesion).