Freestanding Dual Roll Holder
Created 3 days ago
Description
A freestanding, vertical storage post for two spare toilet paper rolls. Built to sit directly on the floor or a countertop.
Remixing and Dimensions
- Capacity: The central stem is 190mm tall, which comfortably holds two standard 110mm-wide rolls.
- Base: 140mm diameter footprint with a sloped transition to anchor the post and prevent tipping.
- Printer compatibility: Total height is ~232mm, designed specifically to max out—but still fit—a standard 250mm Z-axis print volume (like an Ender 3). If you have a taller printer (e.g. 300mm+), extending the stem by 115mm increments will add capacity for a third or fourth roll.
Images
More like this
Explore more in Kitchen & Bathroom →
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
Bulk Floss Spool Dispenser
What it's for A two-part refillable dispenser designed to house standard bulk dental floss spools. The enclosure features a fluted exterior for secure handling and a tapered friction-fit lid with a thumbnail slot for easy reloading. A 1.5 mm side exit channel guides the floss to a sharp, wedged V-notch on the upper rim, allowing for clean tears without requiring a separate metal cutting insert. Dimensions Internal Chamber: 40.5 mm diameter by 12.2 mm deep, accommodating standard 40x12 mm bulk spools. Center Axle: 5 mm diameter, 12 mm tall. Overall Footprint: 46 mm external diameter by 16 mm tall. Remix ideas Resize the central axle to fit non-standard spool cores. Adjust the internal chamber depth for larger commercial floss reels. Swap the fluted exterior for a heavy knurl. Modify the exit hole diameter to accommodate thicker woven floss or tapes.
Cylindrical Jet Manifold Housing
Standard shower heads never hit from all sides, and piecing together a ring of PVC pipes takes up too much room. This is a monolithic print that surrounds the target with water. The housing has an integrated annular water jacket hidden entirely inside the walls. A standard 3/4-inch male garden hose thread feeds the manifold, which then pressurises an array of flush, radially aligned internal jets. Clearances & Details Internal cavity: 55 mm diameter, ~153 mm depth, open at the base and domed at the top. Wall thickness: Built with 3.5 mm inner and 4.5 mm outer structural walls to hold standard tap pressure. Inlet: 3/4-11.5 NH standard hose thread. Printing: The manifold roof is internally chamfered, allowing it to print upright with zero internal supports.
75mm Cotton Bud Gravity Dispenser
A two-piece gravity-feed dispenser designed to store and present standard 75mm by 3mm cotton buds. The internal cavity features a sloped funnel that guides the payload horizontally toward the front tray. A vertical pill-shaped viewing window on the front face provides visual indication of the remaining supply level. Fitment: Accommodates standard 75mm length and 3mm diameter cotton buds. Feed Mechanism: The 4mm wide and 5.5mm high exit slot restricts flow to a single stick at a time. Retrieval: The front catching tray includes a central scalloped cutout for finger access. Components: Includes the main dispenser body and a drop-in top lid.
80mm Tube Squeezer
A heavy-duty tube squeezer sized to clear 80 mm wide tubes. The outer shell is heavily rounded for a comfortable grip while applying torque, and it prints flat on the bed with no supports required. Remix Hooks Slot Gap: Currently set to 1.8 mm. Widen this if you are pushing thick metal paint tubes, or narrow it to 1.2 mm for thin plastic tubes. Overall Width: Built at 108 mm to leave a solid 11 mm wall on either side of the 86 mm slot. Scale the X axis for a different balance between strength and footprint. Thickness: 12 mm deep. Scaling the Z axis changes how much bite it has on the tube and how much leverage it offers.