Honeycomb Bell Faucet Diffuser
Created 3 months ago
Description
Takes the harsh, monolithic stream of a standard kitchen spigot and shatters it into a gentle, wide-dispersion shower. The flared bell silhouette gives the water room to expand before pressing through a tightly packed honeycomb matrix of small perforations. This creates a soft, continuous rain effect that won't blast soap suds aggressively out of the sink basin.
Design Notes
- Standard Threading: Internal female M22x1 threading (8mm depth), toleranced to mate smoothly with standard male kitchen faucet spouts right off the print bed.
- Internal Ledge: Features a precision step below the thread line, giving you a flat landing to drop in a standard rubber sink washer.
- Support-Free: The internal cavity exactly mirrors the exterior bell curve, ensuring a clean, support-free print when standing flat on its hexagonal face.
Images
More like this
Explore more in Kitchen & Bathroom →
Galaxy Cap & Pets
A standalone pop-top can cover designed for easy swapping of customizable 3D-printable pets. Hooks for Remixing The Peg System: The mounting peg on the cap is a standard 3.8 mm cylinder, sitting slightly toward the back edge. Any custom object with a matching 4.2 mm socket will drop right on. Skull Profile: The flat skull on the cap is an exact scaled-down copy of the original 3D geometry. Expansion: Want to add more utility? You could stretch the cap base horizontally to house three or four pets simultaneously, or angle the peg so the figure faces upward when the can is open.
Components view 1st
A touchless smart tap automation enclosure designed to sit directly onto a 15–24 mm tap throat. This is the fully assembled internal view of the water and power management systems. The IP65-style base box drops over the E18-D80NK IR proximity sensor up front and houses native standoffs for standard 50×40 mm and 35×25 mm logic boards. Fitment Checklist Throat: Clamps over 15–24 mm circular taps Sensor Bore: Front-facing 18 mm drop-in for cylindrical IR sensors Tubing: Routing pathways built strictly for 6 mm OD / 4 mm ID polyurethane lines Valve Clearance: Central bay fits standard inline 1/4" 12V DC solenoids
GlideTrak — Under-Shelf Stemware Rack
GlideTrak is an under-shelf stemware storage block designed to securely hold up to four standard wine glasses upside down by their stems. The dual-channel architecture features a continuous track that flares wide at the opening, allowing smooth, one-handed retrieval and stowing of glasses without requiring precise visual alignment. Engineered as a robust mounting block, it secures flush against the underside of a cabinet while maintaining a clean profile. Features Flared Entry: The stem slot narrows from a 14 mm flared opening down to a 9 mm continuous track, guiding standard stems seamlessly into place. Concealed Mounting: Six countersunk holes with screwdriver access tunnels provide secure upward mounting, hiding the screw heads deep within the block. Support-Free Printing: Engineered to be printed standing vertically on its flat back wall, allowing the internal cavities to form cleanly without the need for support material. Dimensions Overall Footprint: 212 mm wide × 170 mm deep × 22 mm thick. Base Clearance: 82 mm wide internal cavity per channel to accommodate standard glass bases. Stem Track: 9 mm track width, expanding to a 14 mm flare at the front entry.
Vented Snap-On Toothbrush Cover
A slide-on travel cover designed to enclose the head of a standard adult toothbrush. Protects bristles from crushing and external contact during transit, while the top-face perforations allow airflow so the brush can dry between uses. The base incorporates side-relief slits and internal retention bumps to snap securely over the neck of the brush, holding the cover in place in a travel bag. Interior cavity measures 26 mm wide, 16 mm deep, and 33 mm tall Vented top allows passive moisture escape Flex-slit base expands to accommodate varying handle tapers Snap-fit retention bumps grip the brush neck
140mm Striped Cookie Stencil
A flat, 1mm-thick stencil designed for decorating cookies and baked goods with horizontal stripes. The pattern features alternating 5mm cutouts and solid bands, enclosed by a rigid 10mm perimeter. A tab extends from the top edge for handling and includes a 6mm hole for hanging storage. Specifications Overall Dimensions: 140 × 140 mm (5.5 × 5.5 in) frame. Pattern Area: 120 × 115 mm. Stripe Width: 5 mm gaps spaced by 5 mm solid dividers. Thickness: 1.0 mm (ideal for 5 layers at 0.2 mm layer height). Storage: 40 mm wide top tab with a 6 mm hanging hole.
Sink Caddy With Drain Slots
Sponges and brushes left in a flat tray sit in a puddle and go sour. This sink caddy lifts them on ribs over a slotted floor so water runs out, and a separate tall holder takes a brush upright. Key numbers Tray: 200 x 110 x 45 mm, 2.4 mm walls Floor: 2.5 mm with 9 drain slots, plus 4 mm ribs to keep items off the surface Front notch: 60 mm wide, lets water pour off the front edge Brush socket: 48 mm square, inner opening 44 mm Removable holder: 40 x 40 x 100 mm with side slots for drainage; 2 mm clearance in the socket Printing Print the tray flat, no supports Print the holder upright 0.2 mm layers, PETG suggested for wet use