Karius Asset Keychain Tag
Created 1 months ago
Description
A custom navy and orange keychain tag built to spec.
- Dimensions: Rounded square profile with an offset triangular fob loop.
- Graphic: A heavily customized initial 'K' with carefully balanced 45-degree stroke angles, rounded terminals, and a detached bottom leg.
- Detail: Features a crisp white asset number in Montserrat for contrast against the navy body.
Images
More like this
Explore more in Keychains & EDC →
Simao Split-Ring Tag
Standard rectangular tag drilled for a 5 mm split-ring. Dimensions to check: Fits standard 20 mm to 30 mm key rings. Clearance bore is 5 mm. Overall length 60 mm, thickness 4 mm including the raised lettering. Does not include chamfers for sliding into tight leather key wallets. Matches Simao.
Stacked Name Keychain Pendant
A black keychain pendant with bold white stacked lettering reading Nodi / Mani / Yani and a small red heart beside the last line. The loop sits above the N. Remix hooks Loop position: centred at about X 2, Y 33 with a 9 mm outer and 4.5 mm hole. Shift it or enlarge the outer diameter for a stronger ring. Heart gap: the heart sits about 1 mm clear of the final letter. Change its X offset (34.2) to adjust spacing. Layer heights: 3 mm black base, 2 mm raised white lettering and red heart, 5 mm total. Font: Archivo Black at 8.5 mm; swap for a rounder face for a softer look. Pairs with: a split ring or small carabiner; assign black, white and red to separate AMS filaments.
LANA Heart AHMED Keychain Nameplate
A three-colour keychain nameplate reading LANA ♥ AHMED, about 60 × 10 mm and 5 mm thick: a 3 mm black base with white letters and a red heart raised 2 mm on top. A black loop on the left end has a 4.5 mm through-hole for a standard key ring. Remix hooks Base thickness (3 mm): the number that sets the plate's heft. Drop it for a lighter tag. Raised height (2 mm): letters and heart share it. Make the heart taller for emphasis. Loop hole (4.5 mm): widen it for thicker rings or cord. Backing margin (1.5 mm): the black border around the letters. Thicken it for a sturdier outline. Names and font: the text is DM Serif Display at about 7 mm tall. Swap the names or the typeface. Pairs well with a metal split ring. Each colour is a separate region for AMS assignment.
Chubby Sitting Hamster Keychain
A compact, sitting hamster figure modelled with exaggerated, rounded proportions for a chunky silhouette. The base is sheared flat to allow support-free printing directly on the build plate, and a reinforced loop is integrated into the upper back of the head. Dimensions: ~28mm wide, 30mm tall. Keyring Loop: 3.2mm horizontal bore, heavily chamfered outer ring. Print Settings: Print upright. The limbs and facial features intersect closely with the main body to minimise overhangs; no supports are required.
Minimalist Concert Ola Keychain
A sleek, minimalist keychain bearing the word "ola" in the Concert One font. The lowercase letters are gently thickened to form a continuous, sturdy body, finishing in a small heart on the right side. Design Features Integrated Keyring Tab: A reinforced loop in the top-left corner is ready for standard split rings. Continuous Body: Offset text creates a solid, unified piece that prints securely and cleanly. Friendly Silhouette: The Concert One typeface combined with a minimal heart provides a smooth, tactile feel.
Fluier Cochilie Spiralată
Un fluier cu siluetă de cochilie de mare: camera rotundă poartă o nervură în spirală, iar muștiucul scurt iese în față ca un cioc. Aerul trece printr-un canal îngust, lovește muchia ascuțită din fereastră și face camera să sune. Cameră de rezonanță cilindrică, închisă Inel pentru breloc în spate Nervura spiralată se poate imprima într-o altă culoare Se printează culcat, fără suporturi; stratul de 0,2 mm dă un sunet curat