Monolithic Sliding Luggage Tag
Created 5 months ago
Remixed 2 times
Description
A sleek, uncompromising travel companion designed to keep details secure until they are needed. This luggage tag features a concealed compartment perfectly scaled for a standard 85-by-55-millimeter business card. The monolithic face of the sliding cover shields personal information from casual onlookers, revealing the details only when identification is strictly required. A robust loop anchors the assembly firmly to a suitcase, briefcase, or duffel.
Design Specifications
- Concealed Carry: The independent sliding cover panel ensures an address remains hidden in transit.
- Standard Fit: Exacting internal dimensions accommodate standard business cards with a generous 5mm protective perimeter.
- Tether Interface: An integrated anchor accommodates heavy-duty leather straps, steel cables, or carabiners.
Images
More like this
Explore more in Keychains & EDC →
Micro Print-in-Place Joystick
This is a print-in-place ball joint that acts as a miniature thumb joystick. The entire assembly prints as one welded-together block with an internal 0.4 mm gap; once it's off the build plate, a firm snap frees the stick to rotate and swivel in the base. It is designed to be as small as FDM printers can reliably manage without snapping the stalk.
Schlüsselanhänger paula
Schlüsselanhänger mit Namen Paula, bei dem die Schrift nicht flach untergeht: Sie steht 0,5 mm erhaben auf der Platte und lässt sich mit dem Finger ertasten. Das Kettenloch sitzt seitlich, damit der Ring nicht über die Buchstaben schleift. Platte: 30 × 14 × 2 mm, Ecken mit 3 mm abgerundet Schrift: „Paula“ in Lobster, 0,5 mm erhaben Kettenloch: 3,5 mm Durchmesser, linke Seite Druck: flach auf der Platte, ohne Stützen, 0,2 mm Schichthöhe empfohlen
Pion Trivial Pursuit 26 mm, 6 camemberts
Support de pion rond de 26 mm de diamètre avec 6 logements en secteur, accompagné de 6 camemberts (secteurs de 60°) à insérer dans les logements. Les pièces s'impriment séparément, à plat. Support : diamètre 26 mm, hauteur 6 mm, fond 2 mm, logements de 4 mm de profondeur Cloisons entre logements : 1,2 mm Camemberts : 6 pièces, hauteur 3,5 mm, avec un plot de préhension de 1,5 mm Jeu d'insertion : 0,25 mm par côté Matériau conseillé : PLA ou PETG, une couleur par camembert
Stitch Head Bead With Ears
A round Stitch-style head bead with two pointed ears, a lighter face patch, eyes and a nose, threaded by a vertical hole for cord or wire. Remix hooks Head size: the head radius is 13 mm (26 mm across). Scale it down for jewelry-sized beads; keep the hole at 3.5 mm or larger for cord. Hole diameter: 3.5 mm runs top to bottom between the ears. Widen it for paracord or narrow it for thin elastic. Ear angle and length: ears are about 21 mm long, splayed 55° outward. Lower the angle for droopy ears, or shorten them for a chunkier keychain bead. Colours: the head, face patch, inner ears and eyes are separate regions, so they suit multicolour printing with filament swaps. Pairs with: plain round spacer beads, a keyring clasp, or a row of beads for a bag charm.
Indian Number Plate Keychain HR82 6791
A rectangular Indian-style number plate keychain with the registration HR82 6791 in raised black letters on a white plate. 70 × 20 mm plate, 3 mm thick, with rounded corners Text raised 0.75 mm for clean printing with a 0.4 mm nozzle 4 mm ring hole on the left side Flat back, no supports needed Single connected piece, white base with black text
Apple Watch SE 44mm Keychain Case
What it's for A two-piece case that turns a 44mm Apple Watch SE (1st gen) into a keychain fob, with no wrist strap. A back shell cradles the watch and carries the key-ring lug. A front bezel fits over it and holds the watch in, leaving the screen open. Dimensions Cavity: 38.6 x 44.6 mm, sized for a 44mm watch body with about 0.3 mm of clearance Outer size: about 44.6 x 50.6 mm, plus the lug Wall thickness: 3 mm Key-ring hole: 5.5 mm Side window on the crown/button edge: 27 mm long, so the Digital Crown and side button stay usable Screen opening: about 1.75 mm of lip around the display Print notes Both parts are laid out separately on the plate. The bezel is flipped so its lip prints flat. Print in PETG or PLA. Check the fit on the stepped joint and sand it if it is tight. The halves are a press fit, and a drop of glue will make the joint permanent. Remix ideas Add a lanyard slot or a carabiner notch. Emboss initials on the back. Make a version for 40mm watches by shrinking the cavity.