Portavasos Geométrico Pilas Baby
Created today
Description
Portavasos de escritorio con texto en bajorrelieve. Diseño de 12 lados (dodecágono) para un aspecto más geométrico y moderno, con espacio central para contener la condensación.
- Diámetro exterior: 90 mm
- Zona interior de apoyo: 82 mm
- Altura total: 4.5 mm
- Texto: "PILAS BABY" dividido en dos líneas.
Images
More like this
Explore more in Kitchen & Bathroom →
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
Continuous Sweep Vase Organizer
A multi-tiered, elegantly swooping kitchen organizer designed to print flawlessly as a single continuous perimeter. It uses folded-wall topology to hollow out six distinct compartments while maintaining strict Vase Mode (spiralize) compatibility. The organic, buttery fillets and perfectly stepped heights make it look more like a high-end ceramic piece than a standard box. Remix & Printing Hooks Vase Mode Ready: Uses 0.2mm routing slits to fold a single continuous wall into the interior. Your slicer will fuse these tiny gaps perfectly, resulting in incredibly fast, retraction-free printing. Alternative Printing: Also prints wonderfully in standard mode with 0% infill, 0 top layers, and 2 perimeters for an ultra-rigid shell. The Dimensions: 160mm wide by 120mm deep. The rear compartment sits at a tall 140mm (spatulas and spoons), dropping smoothly to 95mm for the mid sections, and finishing at a shallow 50mm up front (clips, teaspoons). Scooped Bottoms: The internal compartment floors are elegantly filleted (R12), meaning there are no harsh right-angle corners inside—easy to wipe clean and beautiful to look at.
110g Mozzarella Cheese Scoop
A specialized 60-gram measuring scoop designed for portioning loose grated mozzarella cheese. Designed for a single-handed scoop-and-level workflow. 165 ml internal volume accounts for the bulk density of loosely packed cheese. Completely smooth inner walls and floor for easy emptying and cleaning. Features 12 outer ribs for a secure grip without a handle. Optimized for 3D printing in a single piece with no supports.
Flowing Kitchen Organizer Tray
A premium, single-piece kitchen and desk organizer engineered specifically for support-free FDM printing. The design integrates distinct vertical storage and a sweeping transition into a shallow tray, tied together by a heavy, stable base. Features Rear Compartments: Two independent 128mm tall pockets with 2mm structural walls for heavy utensils. Front Storage: A 65mm tall tool cup and a swooping front-right spoon rest with an organic basin curve. Phone Interface: Twin central resting rails angled at 20 degrees with a dedicated front base cable notch. Printability: 100% support-free geometry with rounded external corners and thick 12-16mm solid base floors to prevent tipping.
Bulk Floss Spool Dispenser
What it's for A two-part refillable dispenser designed to house standard bulk dental floss spools. The enclosure features a fluted exterior for secure handling and a tapered friction-fit lid with a thumbnail slot for easy reloading. A 1.5 mm side exit channel guides the floss to a sharp, wedged V-notch on the upper rim, allowing for clean tears without requiring a separate metal cutting insert. Dimensions Internal Chamber: 40.5 mm diameter by 12.2 mm deep, accommodating standard 40x12 mm bulk spools. Center Axle: 5 mm diameter, 12 mm tall. Overall Footprint: 46 mm external diameter by 16 mm tall. Remix ideas Resize the central axle to fit non-standard spool cores. Adjust the internal chamber depth for larger commercial floss reels. Swap the fluted exterior for a heavy knurl. Modify the exit hole diameter to accommodate thicker woven floss or tapes.