Round Turbah Keychain Container
Created today
Description
A 40 mm round container with a press-fit lid and a keyring loop, sized for a 35 mm turbah disc. The lid carries a red medallion with a silver ornamental pattern of petals, dots and rings. It has no text.
Remix hooks
- Interior fit: the cavity is 36 mm wide; change
IDfor a tighter or looser disc. - Height: the base is 11 mm and the lid adds 3 mm for a stack of about 14–15 mm; raise the base height for thicker discs.
- Ornament: petal count (12 at 30° steps), ring diameters and relief height (0.4 mm) are easy to change.
- Lid grip: the 30 ribs around the rim can be removed or swapped for a knurl.
- Colours: print black, red and silver as separate colour regions in a multicolour slicer.
- Pairs with: a split ring or lanyard clip through the 6 mm loop hole.
Images
More like this
Explore more in Keychains & EDC →
Round Turbah Keychain Container
A 40 mm round keychain container with a hollow cavity for a 35 mm Hussaini Turbah disc and a separate press-fit lid. The closed height is about 15 mm. The lid carries a raised border, a red central medallion, white Arabic lettering (يا أبا عبد الله) and a grey ornamental ring, each a separate colour region. The lid is laid out face-down for printing without supports. Cavity: 35.6 mm diameter, about 10.5 mm deep Lid: snap bead and groove, removable by hand Keyring loop: 4.8 mm hole at the top edge Material: PLA or PLA+, multicolour or filament swap
Stitch Head Bead With Ears
A round Stitch-style head bead with two pointed ears, a lighter face patch, eyes and a nose, threaded by a vertical hole for cord or wire. Remix hooks Head size: the head radius is 13 mm (26 mm across). Scale it down for jewelry-sized beads; keep the hole at 3.5 mm or larger for cord. Hole diameter: 3.5 mm runs top to bottom between the ears. Widen it for paracord or narrow it for thin elastic. Ear angle and length: ears are about 21 mm long, splayed 55° outward. Lower the angle for droopy ears, or shorten them for a chunkier keychain bead. Colours: the head, face patch, inner ears and eyes are separate regions, so they suit multicolour printing with filament swaps. Pairs with: plain round spacer beads, a keyring clasp, or a row of beads for a bag charm.
Minecraft Grass Block Keychain
What it's for A keychain shaped like a Minecraft grass block: smooth brown dirt body, green grass cap that overhangs slightly, and blunt, irregular grass drips on all four sides. A sturdy corner loop takes a key ring. Dimensions Approx. 27 × 27 × 28 mm Cap about 5 mm thick; drips 3.5–8 mm long Loop hole about 4 mm, at one top corner Remix ideas Swap colours for mycelium or snow blocks Change drip layout Enlarge the loop hole for a lanyard
Stacked Name Keychain Pendant
A black keychain pendant with bold white stacked lettering reading Nodi / Mani / Yani and a small red heart beside the last line. The loop sits above the N. Remix hooks Loop position: centred at about X 2, Y 33 with a 9 mm outer and 4.5 mm hole. Shift it or enlarge the outer diameter for a stronger ring. Heart gap: the heart sits about 1 mm clear of the final letter. Change its X offset (34.2) to adjust spacing. Layer heights: 3 mm black base, 2 mm raised white lettering and red heart, 5 mm total. Font: Archivo Black at 8.5 mm; swap for a rounder face for a softer look. Pairs with: a split ring or small carabiner; assign black, white and red to separate AMS filaments.
LANA Heart AHMED Keychain Nameplate
A three-colour keychain nameplate reading LANA ♥ AHMED, about 60 × 10 mm and 5 mm thick: a 3 mm black base with white letters and a red heart raised 2 mm on top. A black loop on the left end has a 4.5 mm through-hole for a standard key ring. Remix hooks Base thickness (3 mm): the number that sets the plate's heft. Drop it for a lighter tag. Raised height (2 mm): letters and heart share it. Make the heart taller for emphasis. Loop hole (4.5 mm): widen it for thicker rings or cord. Backing margin (1.5 mm): the black border around the letters. Thicken it for a sturdier outline. Names and font: the text is DM Serif Display at about 7 mm tall. Swap the names or the typeface. Pairs well with a metal split ring. Each colour is a separate region for AMS assignment.
Portachiavi 30x45x4 mm con battistrada
Portachiavi rettangolare 30x45 mm, spessore 4 mm, con cavità interna chiusa e disegno di battistrada inciso sulla faccia superiore. Misure da controllare Cavità interna: disco Ø26 x 1 mm, a metà spessore (da 1,5 a 2,5 mm), con pareti da 2 mm ai lati e 1,5 mm sopra e sotto. Non è visibile dall'esterno. Foro passante: Ø3 mm, a 3,5 mm dal bordo corto. Battistrada: tacchetti a V e scanalature laterali, profondità 0,6 mm. Compatibilità Il vano è pensato per un inserto piatto fino a Ø25 x 0,8 mm (moneta sottile, rondella, disco magnetico), da inserire con una pausa di stampa al layer 1,5 mm. Non adatto a inserti più spessi di 1 mm. Stampa senza supporti, con la faccia battistrada verso l'alto.