Ruined 85mm Column Planter
Created today
Description
A functional planter designed to resemble a fragmented ancient stone column. The exterior features classical deep flutes and a stepped pedestal base, while the top rim and outer walls integrate geometric cutaways simulating heavy weathering and structural breaks.
Specifications:
- Dimensions: 115 mm maximum base diameter, approximately 110 mm peak height.
- Cavity: 85 mm diameter bore with an 80 mm depth to house standard small nursery pots.
- Tolerances: Minimum 5 mm wall and base thickness maintained throughout all flutes and fracture geometry.
- Printability: Optimised for standard upright FDM printing; all destructive boolean cuts are angled to eliminate the need for supports.
Images
More like this
Explore more in Home & Fixtures →
Anti-Spill Armrest Caddy
Sofa arms are basically designed to launch drinks onto the rug the second you shift your weight. This drops a rigid U-channel over the armrest to bridge the gap, locking down a flat staging plate on one side and a deep cup holder into the other. Specifications Total Length: 200 mm Inner Channel Width: 185 mm (verify this clears your sofa arm) Cup Holder: 80 mm diameter, 32 mm depth Print Specs: Prints hollow to save time and material. No supports needed if your bridging is dialled in.
Blockhouse Sofa Console
A modular, flat-bottom console designed to bridge a couch cushion or rest flat on an ottoman. Built in two interlocking halves to clear a standard 250mm print bed, they join cleanly via six low-profile alignment pegs. Part A: Features two 80mm cupholder wells. Part B: A shallow recessed tray for snacks or plates, completely isolated from the joining mechanism so spills don't travel. Joinery: 25mm deep pegs and receivers, positioned low to leave the tray surface undisturbed. Add a little CA glue during assembly for a permanent hold.
E27 Twisted Crystal Shade
Twisted pendant lamp shade with a spiraling ribbed exterior and a smooth, thin-walled interior to diffuse light. Mating Surface: 43mm through-hole with a flat 4.8mm-thick solid collar. Built for standard E26/E27 threaded pendant sockets. Clearance: Inner ceiling leaves a flat bridge for the socket nut to seat cleanly against. Wall Thickness: The base membrane is exactly 0.8mm thick (prints as two solid perimeters on a 0.4mm nozzle). Ribs: 16 twisted ribs, tapering from 4mm thick at the base down to 2mm near the mount for structural rigidity without blocking light in the valleys. Dimensions: 168mm wide at the opening, 160mm overall height. Prints upside-down (large opening on the bed) without supports.
Aura — Fitted Twisted Pendant
Introducing the Aura pendant shade, strictly tailored to fit on standard 210mm print beds. The flowing, twisted ribbons form a striking teardrop silhouette, capturing light and shadow with an elegant, organic feel. Dimensions & Specs Scale: Fits comfortably within a 210mm cube (205mm height, 200mm maximum diameter). Structure: 32 spiraling ribs, reinforced to a robust 1.8mm width for a full, sturdy profile that prints without supports. Mounting: Built with a standard E27 pendant socket ring at the top and a wide-open base for clean downward lighting. Designed to be printed as a single, durable piece.
Reinforced 8mm Irrigation Y-Splitter
A heavily reinforced Y-shaped hose connector built specifically to merge two fluid lines into one. Designed for 8mm inner-diameter flexible tubing, it uses a solid central hub rather than thin overlapping walls, ensuring the part handles pressure without snapping at the junction. The internal geometry is sculpted to maintain flow: a 6mm channel through the main body prevents a bottleneck at the merge, smoothly necking down to 5mm inside the barbs to guarantee thick, watertight perimeters where the plastic gets thinnest. A precision flat cut on the underside allows the entire assembly to drop straight onto the build plate, completely eliminating the need for support material. Remix Hooks & Constraints Hose Fit: The double barbs peak at 8.5mm OD and drop to a 7.2mm valley, grabbing 8mm ID silicone or vinyl hose tightly. Print Settings: Built for PETG or ABS. Use 4 to 5 perimeters to ensure watertightness and maximum mechanical strength against bending forces. Scaling: Scaling up works cleanly for larger hose (e.g., 125% for 10mm ID), but scaling down is not recommended as the internal channel will restrict flow and the walls may drop below the required thickness for a watertight seal.
8mm Tank Bulkhead Fitting
M18 threaded bulkhead fitting engineered to pass an 8mm inner-diameter irrigation hose securely through a plastic tank lid. Interface: M18x2 thread with an independent hex locking nut. Sealing: Recessed O-ring groove on the interior flange face (2.5mm wide) to provide a watertight seal against the tank wall. Hose Barb: Double retaining barbs with a reinforced transition cone to handle clamping forces. Clearance: The hex nut is designed to slide freely over the 10.2mm barbs and internal threads are sized for clean printing in PETG. Both components are oriented to print flat on the bed without supports.