Description
A Funko-style Santa head printed on its own, with the face, hair, ears, mustache and beard. It is the head piece only, so there is no body, belt, boots, arms or hat.
What it mates with
- A 17.49 × 17.49 mm square pocket, 9.92 mm deep, in the underside. It was cut for a clicker insert.
- A 9 mm threaded post on top, 2 mm pitch. It was made for a screw-on hat, but the hat is not included.
Check before printing
- The beard hangs below the flat underside, so the head needs supports under the face.
- This is not a fit for any body or hat in this file. The hat and body pieces were removed.
Images
More like this
Explore more in Decor & Display →
Santa
Vinyl-toy style Santa figure with an oversized square head, small round body, boots, belt, hat and beard. Built as one welded piece with colour regions for reference. Height: about 70 mm including hat pom-pom Features: coat, white trim, belt with buckle, beard, dot eyes, nose Print upright; hat and beard overhangs are small Material: PLA or PETG
Noelring — Christmas Lettering Ring for a 97.4 mm Sphere
Noelring is a seating ring designed to sit inside a hollow sphere, with “Merry Christmas 2026” lettering held in its opening. The ring’s outer edge is cut to the sphere’s inner curve, so the seat meets a 97.4 mm internal-diameter shell across the full 3 mm ring width instead of resting on a single line. The top and bottom faces are flat, the centre is open with no background plate, and the three text lines run the full 4 mm height of the ring, flush with both faces. The lettering is set in Parisienne, a connected cursive script with a dotless “i” in “Christmas”; “Christmas” runs into the ring wall at both ends and is the only line fused to it, while “Merry” and “2026” are not tied to the ring and depend on touching “Christmas” to stay in place. Dimensions Ring: 97.4 mm outer diameter × 4 mm tall Ring width: 3 mm; inner diameter about 91.4 mm Seat: outer edge curved to a sphere with a 97.4 mm internal diameter (48.7 mm radius) Lettering block: about 91.3 × 48.2 mm, full 4 mm height Features Curved outer edge follows the sphere’s inner surface across the full ring width Flat top and bottom faces, with the seat carried on the outside edge Open centre: the lettering has no background plate behind it Three stacked lines, “Merry”, “Christmas” and “2026”, set in Parisienne, a connected cursive script “Christmas” runs into the ring wall at both ends and is anchored there “Merry” and “2026” are not joined to the ring; they rely on contact with “Christmas” The “i” in “Christmas” is dotless, so the line has no separate dot All three lines are set flush with the ring’s top and bottom faces Fit Made for a hollow shell with a 97.4 mm inner diameter; scale the ring and sphere together for any other size The 4 mm height is a design choice: a taller ring grips more wall but reaches further into the sphere The ring locates itself against the sphere’s curve rather than locking in place Print notes “Christmas” is fused to the ring at its ends; “Merry” and “2026” are held only where they touch “Christmas” — check those contact points before printing If a word does not touch “Christmas”, it will print as a loose piece No struts connect “Merry” or “2026” to the ring wall No supports should be needed for the flat ring and full-height lettering
Chubby Baby Dragon Figurine
A cute chubby yellow baby dragon with a big round head, cream oval belly, green eyes, short limbs, a tiny tail and small horns. About 80 mm tall with a flat base, built as one welded body. Remix hooks Head size: the head is a 48 mm sphere; enlarge it for a more chibi look, but keep the body wide enough to support it. Eyes: 10 mm ovals; push them outward or scale them up for a different expression. Belly: a flattened ellipsoid at the front; swap its colour for multi-colour printing. Pairs with: a round display plinth, or a keychain loop on the horns. Limbs and tail: short ellipsoids, easy to lengthen if you want a more dynamic pose.
Germania Relief — Wypukła Mapa Niemiec
Germania Relief to wypukła mapa Niemiec z rzeźbą terenu: cała powierzchnia jest lekko falista, także na nizinach, a góry wybijają się ponad nią. Wzniesienia mają gładkie, wielowarstwowe zbocza i nieregularne, powyginane obrysy zamiast regularnych owali. Cztery wyżłobione rzeki przecinają teren, a Ren jest wyróżniony zielonym wypełnieniem koryta, przyciętym do zarysu mapy, oraz tabliczką „Ren”. Znaczniki — trzy miasta, szczyt, Alpy, Ren i jeziora — są osobnymi elementami: leżą płasko obok mapy, bez dodatkowej podstawy, i pasują do gniazd w mapie. Całość czyta się jak dekoracyjna mapa reliefowa, a nie płaski plan. Najważniejsze cechy Ukształtowanie terenu w gładkich, wielowarstwowych zboczach, z Alpami wybijającymi się ponad resztę mapy i zieloną tabliczką „Alpy” Cztery rzeki, w tym Ren z zielonym wypełnieniem koryta przyciętym do zarysu mapy i podpisem; wypełnienie leży w korycie na mapie Trzy największe miasta — Berlin, Hamburg i Monachium — oznaczone wyjmowanymi słupkami z pionową tabliczką z wypukłym napisem Najwyższy szczyt Alp oznaczony wyjmowanym znacznikiem z kulką, kołkiem i tabliczką „Najwyzszy szczyt” Jeziora: Muritz, Bodensee i Steinhuder Meer — niebieskie wkładki w wycięciach, podpisane małymi tabliczkami Wyjmowane znaczniki leżą luzem obok mapy, bez podstawy; po przełożeniu wciska się je w gniazda mapy W zestawie Mapa Niemiec ok. 124 × 160 mm z gniazdami na znaczniki Wyjmowane znaczniki miast, szczytu, Alp, Renu i jezior, leżące płasko obok mapy Znaczniki nie mają osobnej podstawy Druk i montaż Model składa się z mapy i osobnych znaczników. Znaczniki są wciskane w gniazda mapy; pasowanie jest ciasne, więc luzy warto sprawdzić na wydruku. Najdrobniejsze elementy, jak kołek szczytu, są delikatne.
Visor Mirror Housing, Cover and Pin Set
What it's for A slim visor vanity mirror housing with a flip-up cover, split into three separate printed pieces: housing, cover and hinge pin. Glass is supplied by the user. Dimensions Housing: 128 × 58 × 6.5 mm, 1 mm chamfered top edges, 3 mm corners Glass pocket: 121 × 51 × 3.4 mm, for 120 × 50 mm glass Cover: 2.4 mm plate with a 0.4 mm locating lip Hinge pin: 3.2 mm diameter, 127.4 mm long, printed separately Print notes Print all three pieces as laid out on the plate, with no assembly needed before slicing. Slide the pin through the housing knuckles and the cover knuckles after printing. The cover plate sits about 2 mm above the bed at its hinge side, so use supports under it. PETG is recommended for the pin. Remix ideas Add a snap-shut detent. Change the pocket size for different glass. Add a thumb tab on the cover.
Frostmourne 2U Backspace Keycap
A 37 × 18 × 12 mm hollow 2U keycap with a raised Frostmourne sword running lengthwise across the top, flanked by two relief skulls and a row of small icy spikes along both long edges. It has a Cherry MX cross socket at center and two stabilizer sockets at ±11.9 mm. Remix hooks Wall and top thickness: walls are 1.8 mm and the top plate is 2 mm (cavity ends at z = 8.5). Thicken for strength or thin for less plastic. Relief height: all relief rises about 1.5 mm above the 10.5 mm top surface. Raise it only if the 12 mm height limit isn't a constraint. Skull placement: skulls sit at x = +5.5, y = ±5.4. Move or mirror them to the hilt side, or swap in other emblems. Socket fit: the cross slot is 4.2 × 1.35 mm. Adjust ±0.1 mm to tune for your printer's tolerance. Pairs with: Cherry MX switches and a standard 2U plate-mount or PCB-mount stabilizer. Print upside down, or with the top facing up using a fine layer height such as 0.12 mm. Variants: swap the sword for another motif, or recolor the spikes with a filament change.