Deutschland — Relief Map with City Pins
Created today
Description
Deutschland to a relief map of Germany with raised uplands and mountains, carved river channels, and 12 major cities marked by slim pins. Each pin has a round base, a ball head and a small flag plate with the city name in raised letters, readable from above.
Features
- Terrain relief in smooth stepped layers, with Alps and central uplands
- Four carved rivers
- 12 labelled cities: Berlin, Hamburg, Monachium, Kolonia, Frankfurt, Drezno, Brema, Hanower, Stuttgart, Norymberga, Dusseldorf, Lipsk
- Three colour regions: map, pins, name flags
Print notes
- Pins are thin (1.8 mm), so print slowly or glue them in if they snap
- Outline and city positions are simplified, not cartographic
Images
More like this
Explore more in Decor & Display →
Lotus Flame LED Tealight Holder
A Diwali LED tealight holder: a pointed, flame-shaped white frame stands on a round base, with a red lotus panel set inside it. The lotus is cut clean through the panel, so the LED glow shows through from the front cup. Five red petals wrap the cup, and two large white petals sweep out to the sides. Designed for battery LED tealights only, never real flames. Remix hooks Cup size: 41.6 mm bore, 20 mm deep, 47.6 mm outside. Change the bore for a different tealight brand. Open top, so the LED lifts straight out. Flame silhouette: one width function sets the outline (about 40 mm half-width, 136 mm tall, standing on a 5 mm, 85 mm base). Change the exponents for a slimmer or fuller flame. Lotus pattern: the cutouts are a short list of ellipses (centre petal 11 x 44 mm). Add a ring or swap the shapes, and keep a 2 mm or wider web between openings. Colour split: red panel and front petals, white everything else. The panel sits in a 1 mm slot with 0.1 mm clearance on each face, so it prints flat and drops in. Swap in blue for an accent. Pairs with: a flat LED tealight, or a second panel with a different motif. Starting dimensions Height about 140 mm Width about 120 mm across the outer petals Depth about 85 mm, set by the base Frame 8 mm thick, panel 3.5 mm thick
Funfair Swing Ride with Crank, 100 mm Base
Funfair swing ride with a hand crank on top. Turning the crank spins the canopy and seat ring around a fixed central pin, and each of the six seats hangs from a captive ball joint so it swings outward as the ride turns. Base: 100 x 100 x 6 mm plate with a 30 mm column and 14 mm mast Spinning top: 70 mm seat ring and cone canopy on a 8 mm pin, 0.3 mm bearing clearance Seats: six, each on a 7 mm captive ball with a 3 mm rod, printed in place Crank: 30 mm arm with a 7 mm handle on top of the canopy Print in place, no supports needed for the base; the ring cavities bridge over the balls Overall height about 112 mm
OO Scale Arched Door Frame 13x26mm
Arched door frame and separate door for an OO scale (1:76) house, sized for a 13 x 26 mm wall opening with a semicircular top. The frame is 2 mm deep and continues around the inside of the arch, leaving a semicircular glass gap above the door. Frame: 12.8 mm wide, 25.9 mm tall, 2 mm deep Glass gap: semicircle, 8.8 mm across Door: 8.4 x 17.8 mm, printed as a separate piece Door detail: four raised panels, round handle, letterbox plate Fit: 0.1 mm clearance per side in the wall opening Print with a fine layer height; panel relief is 0.4 mm
Halloween Spider Decoration for Shelves
A Halloween spider decoration that stays put on a shelf or mantel, instead of a flat cutout that falls over. Eight bent legs spread out as a stable base. Key numbers Body: about 24 mm abdomen, 14 mm head Leg span: roughly 80 mm across Print: no brim needed; supports under the legs and head may help Material: any PLA works; multicolour optional
Chubby Baby Dragon Figurine
A cute chubby yellow baby dragon with a big round head, cream oval belly, green eyes, short limbs, a tiny tail and small horns. About 80 mm tall with a flat base, built as one welded body. Remix hooks Head size: the head is a 48 mm sphere; enlarge it for a more chibi look, but keep the body wide enough to support it. Eyes: 10 mm ovals; push them outward or scale them up for a different expression. Belly: a flattened ellipsoid at the front; swap its colour for multi-colour printing. Pairs with: a round display plinth, or a keychain loop on the horns. Limbs and tail: short ellipsoids, easy to lengthen if you want a more dynamic pose.
Quetzalcoatl Feathered Serpent Plaque
A stylized cosmic serpent in the spirit of Aztec Quetzalcoatl: a weaving, tapering body of stacked beads, a blocky head with fangs and a fanned feather crest, and a rattle-like tail, all resting on a flat stone-coloured plate. Flat base plate for stable printing Body tapers from head to tail Colour regions: body, head and crest, tail, base Pairs well with a shelf or desk display