Slanted 6-Slot Knife Block
Created today
Description
A countertop block designed to hold six standard kitchen knives. The body and interior slots lean backward at a 15-degree angle, presenting the handles for quick identification and unobstructed access while cooking.
- Six individual slots measuring 4 mm by 30 mm.
- Open-bottom cutouts prevent moisture accumulation inside the block.
- Flat, stable base for solid countertop placement.
Images
More like this
Explore more in Kitchen & Bathroom →
Sliding Tiered Spice Organizer
A tiered storage system designed to solve visibility issues in deep cabinets. The stationary track fastens directly to the cabinet floor, allowing the stepped upper shelves to pull forward so rear jars can be reached without knocking over the front row. Features: Three elevated tiers sized for standard commercial spice jars. Integrated front containment lips on each level. Smooth T-slot rail mechanism with engineered tolerances for unbinding slide action. Four countersunk mounting points for permanent installation.
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
4-Slot Electric Toothbrush Holder
A wall-mounted organization solution designed specifically for larger electric toothbrush handles. The structure provides dedicated storage that keeps brushes secure and accessible while protecting surrounding bathroom surfaces. A built-in shallow tray catches runoff, preventing water from streaking down tiles or pooling on countertops. Key features of this design: Four 30mm slots sized to comfortably drop in chunky grips, including Oral-B and Sonicare models. Recessed lower drip tray to capture water and toothpaste residue. Two countersunk mounting holes positioned for stable installation against the wall. Open clearance between the shelf and tray to allow wet handles to dry efficiently.
Angled Travel Mug Drying Rack
A countertop drying rack with a built-in 270x180mm drip tray, designed to hold washed bottles and travel mugs upside down. The six pegs are angled at 15 degrees to ensure trapped water drains out entirely, preventing stagnant moisture and bottle funk. Starting Parameters Peg layout: Set at an 85mm pitch on the X-axis and 90mm on the Y-axis. Expand this grid if accommodating oversized vacuum flasks or wider mugs. Peg dimensions: Currently 100mm long and 12mm thick, sunk into 22mm base bosses for leverage resistance. Extend the Z-length for tall carafes or increase the thickness if printing in a brittle filament. Drainage: The 15mm high outer wall keeps runoff contained. A remixer could slope the inner tray floor or add an edge spout for direct sink drainage.
Continuous Sweep Vase Organizer
A multi-tiered, elegantly swooping kitchen organizer designed to print flawlessly as a single continuous perimeter. It uses folded-wall topology to hollow out six distinct compartments while maintaining strict Vase Mode (spiralize) compatibility. The organic, buttery fillets and perfectly stepped heights make it look more like a high-end ceramic piece than a standard box. Remix & Printing Hooks Vase Mode Ready: Uses 0.2mm routing slits to fold a single continuous wall into the interior. Your slicer will fuse these tiny gaps perfectly, resulting in incredibly fast, retraction-free printing. Alternative Printing: Also prints wonderfully in standard mode with 0% infill, 0 top layers, and 2 perimeters for an ultra-rigid shell. The Dimensions: 160mm wide by 120mm deep. The rear compartment sits at a tall 140mm (spatulas and spoons), dropping smoothly to 95mm for the mid sections, and finishing at a shallow 50mm up front (clips, teaspoons). Scooped Bottoms: The internal compartment floors are elegantly filleted (R12), meaning there are no harsh right-angle corners inside—easy to wipe clean and beautiful to look at.
Flowing Kitchen Organizer Tray
A premium, single-piece kitchen and desk organizer engineered specifically for support-free FDM printing. The design integrates distinct vertical storage and a sweeping transition into a shallow tray, tied together by a heavy, stable base. Features Rear Compartments: Two independent 128mm tall pockets with 2mm structural walls for heavy utensils. Front Storage: A 65mm tall tool cup and a swooping front-right spoon rest with an organic basin curve. Phone Interface: Twin central resting rails angled at 20 degrees with a dedicated front base cable notch. Printability: 100% support-free geometry with rounded external corners and thick 12-16mm solid base floors to prevent tipping.