Stepped Makeup Organizer With Tilting Mirror test 1
Created yesterday
Remixed once
Description
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free.
The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet.
Assembly Notes
- The parts are laid out flat on the build plate for support-free FDM printing.
- Uses modular drop-in supports to mount the mirror frame.
- The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins.
- Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
Images
More like this
Explore more in Kitchen & Bathroom →
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
Freestanding Dual Roll Holder
A freestanding, vertical storage post for two spare toilet paper rolls. Built to sit directly on the floor or a countertop. Remixing and Dimensions Capacity: The central stem is 190mm tall, which comfortably holds two standard 110mm-wide rolls. Base: 140mm diameter footprint with a sloped transition to anchor the post and prevent tipping. Printer compatibility: Total height is ~232mm, designed specifically to max out—but still fit—a standard 250mm Z-axis print volume (like an Ender 3). If you have a taller printer (e.g. 300mm+), extending the stem by 115mm increments will add capacity for a third or fourth roll.
80mm Tube Squeezer
A heavy-duty tube squeezer sized to clear 80 mm wide tubes. The outer shell is heavily rounded for a comfortable grip while applying torque, and it prints flat on the bed with no supports required. Remix Hooks Slot Gap: Currently set to 1.8 mm. Widen this if you are pushing thick metal paint tubes, or narrow it to 1.2 mm for thin plastic tubes. Overall Width: Built at 108 mm to leave a solid 11 mm wall on either side of the 86 mm slot. Scale the X axis for a different balance between strength and footprint. Thickness: 12 mm deep. Scaling the Z axis changes how much bite it has on the tube and how much leverage it offers.
River Stone Chopstick Rest
A minimalist chopstick rest modeled after a smooth, weathered river stone. The organic shape grounds the table setting, while a gentle saddle cut across the top cradles your utensils securely to prevent rolling. Design Notes Flat base for stability on the table Smooth, sweeping top cut prevents rolling Organic, asymmetrical shape for a natural aesthetic
60g Mozzarella Cheese Scoop
A specialized 60-gram measuring scoop designed for portioning loose grated mozzarella cheese. Designed for a single-handed scoop-and-level workflow. 165 ml internal volume accounts for the bulk density of loosely packed cheese. Completely smooth inner walls and floor for easy emptying and cleaning. Features 12 outer ribs for a secure grip without a handle. Optimized for 3D printing in a single piece with no supports.
Mason Jar Fly Trap Lid
Leaving a bowl of vinegar on the counter just means you eventually knock over a bowl of vinegar. This insert replaces the flat lid in a canning ring to turn any jar into a one-way trap Diameter: 84 mm (fits the ring). Depth: 35 mm funnel projection into the jar. Exit Aperture: 4 mm (wide enough to enter, too narrow to navigate back). Printability: The flat face sits on the bed. The funnel tapers upward. Zero supports needed.