Tavernenkrug — Becherhalter
Created today
Description
Ein massiver, geometrischer Tavernenkrug, der als exakte Aufnahme für einen konischen Becher dient. Das Design verzichtet auf organische Formen und setzt stattdessen auf eine 12-eckige Fass-Struktur mit verstärkten Rändern im "Iron Band"-Stil.
Maßgeschneidert
- Innenmaße: Konischer Hohlraum (65,6 mm unten, 86,6 mm oben).
- Tiefe: 107 mm (lässt den Becher exakt 20 mm überstehen).
- Features: Integrierte 2 mm Entlastungsvertiefung am Boden und eine Luftausgleichsnut, damit sich der Becher beim Einsetzen nicht festsaugt.
- Henkel: Ergonomischer Griff mit 35x75 mm Innenöffnung.
Images
More like this
Explore more in Kitchen & Bathroom →
Galaxy Cap & Pets
A standalone pop-top can cover designed for easy swapping of customizable 3D-printable pets. Hooks for Remixing The Peg System: The mounting peg on the cap is a standard 3.8 mm cylinder, sitting slightly toward the back edge. Any custom object with a matching 4.2 mm socket will drop right on. Skull Profile: The flat skull on the cap is an exact scaled-down copy of the original 3D geometry. Expansion: Want to add more utility? You could stretch the cap base horizontally to house three or four pets simultaneously, or angle the peg so the figure faces upward when the can is open.
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
43mm Bore Egg DSLR Kit
A multi-part glue-together camera chassis built around a 43mm bore standard to hold two large chicken eggs. The main chassis houses the egg bores and the right-hand grip, while all dials, rings, and screens are printed separately and dropped into 1mm alignment recesses on the main block. Fitment Fits two standard large/jumbo chicken eggs (vertical clearance is completely unimpeded) Mounts to flat build plates only; requires CA glue or similar for the detail pieces Main chassis is 125mm wide; ensure your plate can handle it before starting
Point-and-Shoot Egg Caddy
A fun, functional holder for two standard chicken eggs styled exactly like a classic compact digital camera. Built to mimic realistic compact proportions, this design features an array of modular, colour-separated printable pieces — from the multi-stage lens assembly to the top control dials and rear screen — that socket precisely into the main camera block. Print notes When you load the main STL into your slicer, simply use the "Split to Objects" or "Split to Parts" function. The model is built entirely from mathematically separated, non-overlapping shells. You can then recolour each piece (the outer lens ring, screen insert, shutter button, etc.) for a multi-colour print, or delete the ones you've already printed and run them off in batches of single-colour filament. Assembly All separate pieces sit perfectly flush against shallow 0.5 mm recesses on the main body. Once printed, they drop neatly into place with a dab of glue. Features Secure, deep recesses for two standard chicken eggs. Fully cleared top deck — the mode dial and shutter button sit out on the shoulders so you have unhindered access to drop the eggs in and pick them up. Dedicated 40×20 mm flat recess on the back panel designed specifically for a company logo or custom sticker.
Wide Mason Jar Canning Funnel
What it's for A broad canning funnel designed to rest securely on regular-mouth mason jars. It shields the jar rim from spills while ladling jams, sauces, or dry goods, keeping the threads clean to ensure a proper seal. Dimensions Top mouth: 110 mm diameter for easy ladling. Throat: 60 mm diameter to clear the jar neck. Resting lip: 78 mm diameter to sit on the rim. Total height: 60 mm. Print notes Orient the funnel upside-down in your slicer so the wide 110 mm rim sits flat on the build plate. It prints without supports in this position. If using for hot foods, consider heat-resistant and food-safe materials like PETG or PP. Remix ideas Scale the lip and throat geometry for wide-mouth mason jars. Add an integrated side handle or loop to lift the funnel easily when hot. Add a flat edge to one side of the top flare for easier storage in a drawer.
Slanted 6-Slot Knife Block
A countertop block designed to hold six standard kitchen knives. The body and interior slots lean backward at a 15-degree angle, presenting the handles for quick identification and unobstructed access while cooking. Six individual slots measuring 4 mm by 30 mm. Open-bottom cutouts prevent moisture accumulation inside the block. Flat, stable base for solid countertop placement.