N Gauge tram Depot
Created 13 days ago
Description
A heavily customised three-road tram shed for N gauge model railways. This version features a widened bay footprint, and a shortened four-window depth.
Model Features
- Proportions: Reduced length to better fit cramped layout boards while widening the roads to accommodate broader rolling stock profiles.
- Support-free Roof: The internal 45-degree gables mean the ceiling prints entirely without internal supports, despite the flat false-front parapet.
Print Notes
Fine architectural textures like stone blockwork or corrugated iron sheets aren't baked into the geometry to keep the slice time manageable and polygon counts sane. We recommend using your slicer's 'fuzzy skin' feature for a stucco/stone effect on the walls, or applying thin patterned styrene sheets to the shell after printing.
Images
More like this
Explore more in Automotive, RC & Hobby →
OO Scale Terrace Houses Half Relief Flat Pack
What it's for A three-house flat-pack terrace kit designed for OO gauge (4mm to the foot) railway modeling. Includes a unified front facade, separate sloped end panels, a tiled roof spanning all three dwellings, and individually printed window and door inserts. The flat-pack layout ensures pristine surface details right off the build plate without relying on supports. Dimensions Total Span: 180 mm wide facade (matching standard OO scale footprints for a terrace trio). Max Height: 85 mm at the rear roof peak. Inserts: Doors scaled accurately to 26 mm tall, with classic 18 mm sash windows. Assembly The main panels feature precision 45-degree mitred edges on the front and sides for seamless corner joints. Interlocking stone quoins wrap neatly around the assembled corners. Print the window and door inserts separately, paint as desired, and secure into the recessed front facade openings.
OO Scale Georgian Townhouse Facade
What it's for A classic Georgian-style townhouse facade designed for OO scale (4mm to 1 foot) model railway backdrops. The model is presented as a flat-pack kit. The main facade features deeply cut ashlar grooving on the ground floor, classic protruding quoins along both edges, and a prominent cornice. To make painting easier, the door and windows are provided as separate, drop-in pieces. Each window features 6-over-6 pane glazing bars, a sturdy lintel, and a sill. The door has six traditional panels and a distinctive triangular pediment. Small 1mm locator blocks on the back of each insert ensure they sit perfectly centered in the facade holes while hiding the seams. Shallow side walls and a roof cap are included to give the facade structure and depth. Dimensions Scale: OO (1:76.2) Facade: 80mm wide by 130mm high Side Walls: 20mm deep Door Opening: 12mm x 28mm Windows: Five large inserts for the ground and first floors; three slightly shorter inserts for the second floor. Assembly Everything prints flat on the bed. Once painted, slide the windows and door into their respective holes in the main facade — the oversized outer frames will overlap the cutouts for a flawless finish. The side walls can be glued flush to the back edges of the facade, and the flat roof slots securely between them.
Lego piece for wagon door runner with thinner teeth bit slightly smaller
Wagon door runner to replace 3 off 15208 bricks Version with slightly too large slope
0.355 to 0.370 Golf Ferrule
Custom transition ferrule designed to mate golf shafts with an adapting taper. Before printing, verify your shaft tip standard. This part spans from a 0.355-inch taper dimension to a 0.370-inch parallel dimension. Critical Measurements: Inner Bore (Bottom): 9.0 mm (0.355") Inner Bore (Top): 9.4 mm (0.370") Outer Diameter: 13.5 mm (0.530") constant Length: 22.0 mm (0.875") Does not fit standard parallel-only 0.370" shafts at the base without binding.
Custom 16T Mod 0.5 Gear
What it's for A custom 16-tooth spur gear designed for tight tolerances and specific meshing requirements. Built with a modified pressure angle for a sharper tooth profile, and zero standard clearance to strictly match the requested root and outer diameters. Dimensions Outer Diameter: 9.00 mm Root Diameter: 7.00 mm Bore Diameter: 1.55 mm Thickness: 2.00 mm Module: 0.5 (with 28° pressure angle) Print notes Given the small 1.55 mm bore and fine module 0.5 teeth, a resin printer or an FDM machine with a 0.2 mm nozzle and highly calibrated flow is recommended. If printing on standard 0.4 mm FDM, horizontal expansion (XY compensation) may be needed to keep the bore true to size.
D-Shaft to Hex Motor Adapter
A rigid drive adapter connecting a standard D-shaft motor to a hexagonal RC wheel hub. The base features a keyed socket to prevent slip under torque, while the driven end seats into the tire's existing recess. Overall Length: 25 mm Motor Socket: 6 mm diameter with a 3 mm flat profile, 10 mm depth Wheel Drive: 5.2 mm flat-to-flat hexagonal peg, 10 mm length Base Diameter: 12 mm for structural wall thickness around the socket