100mm Open-Pour Gummifisch-Form
Created today
Description
Eine offene Halbschalenform für 100 mm Gummifische mit einer herausnehmbaren Platzhalter-Einlage für saubere, dreifarbige Güsse.
Der Gießablauf funktioniert umgekehrt zu einer geschlossenen Form:
- Platzhalter: Die Einlage wird vor dem Guss in die Schale gesteckt. Ihre dreieckigen Zähne ragen exakt in den Rückenbereich des Köders.
- Hauptguss: Der Köderkörper wird von oben mit den beiden Hauptfarben (UV und dunkel) flach ausgegossen.
- Zacken gießen: Sobald das Plastisol leicht angezogen ist, wird der Platzhalter am Griff herausgezogen. Die dadurch freigewordenen dreieckigen Hohlräume im Rücken werden anschließend mit der dritten Farbe (Rot) aufgefüllt.
Spezifikationen:
- Passung: 0.2 mm Toleranz am Platzhalter für leichtes Entformen.
- Köderprofil: 100 mm Gesamtlänge, schlanker Körper mit 14 mm breitem Schaufelschwanz.
- Druck: Beide Teile liegen flach auf der Z-Achse und benötigen keine Stützstrukturen.
Images
More like this
Explore more in Automotive, RC & Hobby →
Nimbus — 100mm Quad Frame
A scaled-up quadcopter frame designed for 7mm coreless motors. Originally modeled for a compact layout, the arms are now extended to give a full 100x100mm outer footprint while retaining the 25.5mm whoop flight controller mounting pattern. Features Friction-fit Mounts: Sized for 7mm brushed motors, with an integrated wire routing slit. Underslung Tray: Integrated bottom mount for a standard 1S battery. Lightweight Arms: Hull-cut arm profiles that parametrically scaled up to span the new 100mm stance without adding unnecessary mass.
Space Command Console Toy
The keyboard belongs to you. The TV remote belongs to you. The oven dials are strictly off limits. But they still want to press buttons, and everything they reach for has a consequence. This console solves that. It’s a chunky, slanted control panel built to take a hammering. The throttle is a captive slider that prints fully in place—no assembly, just crack it loose and it glides. The giant red and green buttons sit on thin printed hinges, giving them enough flex to feel like a real press without needing actual springs or hardware. The dials and radar screen are solid topographic features that add tactile feedback without weak points. Printing Notes Dimensions: The base fits squarely on a 180x130mm footprint. Print-in-Place Clearance: The slider runs in an internal T-slot with a generous 0.5mm clearance on all sides, making it easy to free up on almost any FDM machine. Orientation: Designed to sit entirely flat on the build plate. The 13-degree slope of the panel is built into the geometry, so the internal bridges and tracks print parallel to the bed. Settings: Standard 0.2mm layer heights work beautifully. Three perimeters recommended to keep the compliant button hinges tough.
jgdfjhgmjvgkhlb
A compact, print-in-place traveling nut mechanism designed to mount onto a 15mm diameter shaft. This stopper locks rotation exactly at 900 degrees (2.5 turns) in either direction. The inner blue sleeve slides over your 15mm shaft and secures with a standard M3 bolt and captive nut, while the outer orange traveler moves up and down the internal threads as the wheel turns. Fitment and Constraints Host Shaft: 15mm diameter. The bore is modeled at 15.2mm to allow for a snug fit. Rotation Limit: Exactly 900 degrees (2.5 turns), enforced by rigid top and bottom flanges. Assembly: Print-in-place. The mechanism prints fully assembled with 0.4mm radial clearance in the threads, permanently capturing the traveler nut between the outer flanges so it cannot back off. Installation Requirements: You must have a fixed block or housing wall nearby for the traveler nut's side tab to ride against; this prevents the nut from simply spinning with the shaft and forces it to travel linearly.
Utilitarian Chassis Flight Skids
This lightweight hardware suite is designed for custom chassis builds, keeping the overall footprint low while providing a sturdy base. The components are arranged flat on the build plate for easy, support-free fabrication. Flight Hardware The Deck: A 50×55 mm central mounting plate. It features a solid 2 mm deck surrounded by a 3 mm retaining wall, ideal for corralling electronics or batteries. The Skids: Twin 50 mm long landing legs. They have been heavily cored out to reduce mass, leaving just a rugged 3 mm footprint and sturdy outer struts to handle hard landings.
1/24 Scale Linear Ramp
1/24 Scale Linear Ramp. A straight wedge built for indoor carpet use, featuring a 45mm rise over a 200mm run. The deck is cut with 1.5mm traction grooves to give foam or rubber tires something to bite on, and the underside is hollowed out around three longitudinal trusses to prevent deck deflection without wasting material. Fitment Checks Track Width: The ramp face is exactly 150mm wide. Check your chassis track width — anything over 130mm is going to struggle to stay completely on the deck. Scale: Designed for 1/24 or 1/28 scale chassis (SCX24, Mini-Z, etc.). It is generally too narrow for 1/16 scale and will absolutely not fit 1/10 scale. Clearance: Approach lip is 1.5mm thick.