550 Paracord Mini Camera Bead
Created today
Description
A miniaturized camera bead designed to fit standard 550 paracord. The body has been scaled down for a tighter profile on lanyards or zipper pulls, while maintaining the exact bore needed to thread over the cord.
- Bore: 3.5mm (fits standard un-gutted 550 paracord).
- Dimensions: 12mm wide by 8mm tall.
- Assembly: Built as a single solid mesh with distinct geometric regions, making it simple to assign silver and black colors in your slicer without manual painting.
Images
More like this
Explore more in Keychains & EDC →
Overwatch — Event Badge Holder
A rigid, oversized vertical credential holder built to exactly 5.5 × 3.5 inches footprint. It features a central thumb cutout to let you quickly pop the badge out when needed, while retaining tabs lock the card securely in place during wear. Features Dual Attachment Points: Lanyard and clip slots at both the top and bottom edges so you can hang it standard or tether it down. Snap-In Tabs: Low-profile overhanging clips securely grip the top and bottom of the card. Thumb Ejector: A large central window in the backplate makes removing the badge quick and frictionless.
Pocket Multi-Fidget Block
What it's for A dense, multi-function pocket fidget block that packs six tactile mechanisms into a single footprint. Designed to be printed entirely flat without supports, it features a print-in-place captive joystick, a spinning side-wheel, and two cantilevered clicky buttons. The front edge houses a deep hidden storage slot containing a flat-packed basketball kit. The backboard (complete with a rubber band hook on the rear) slots into the top of the block, and the rim snaps firmly into the backboard. Finally, one quadrant contains an internal hollow tank cavity with a threaded fill plug and a side spout. The top wall of the tank is intentionally thin (0.8mm) with a tactile button pad—pressing it lightly flexes the roof, simulating a squirt-pump mechanism. (While functional in TPU, printing in PLA serves as a satisfying, slightly yielding fidget button). Dimensions Base Block: 60 × 60 × 18 mm. Storage Slot: 46 mm wide, 58 mm deep, 4.5 mm tall. Backboard: 30 × 25 mm (excluding base peg). Rim: 18 mm outer diameter. Assembly Print Settings: No supports required. Ensure your printer is dialed in for 0.4mm print-in-place tolerances so the joystick and spinner break free smoothly. Hoop: Slide the backboard out of the front slot, insert the peg into the slot on the top deck, and press the rim peg into the backboard hole. Tank: The included friction plug seals the top fill hole.
25mm Split Ring Registration Plate
Solid registration plate built to clear standard 25mm split rings. The 4.5mm bore is strictly for split rings or small carabiners; it will not accept wide webbing or thick lanyards. Print Specs Footprint: 80mm x 20mm Base Plate: 2.4mm thick. Embossed Details: Text and border sit 0.8mm above the face. Stop the print at 2.4mm Z-height to swap colors.
Simao Split-Ring Tag
Standard rectangular tag drilled for a 5 mm split-ring. Dimensions to check: Fits standard 20 mm to 30 mm key rings. Clearance bore is 5 mm. Overall length 60 mm, thickness 4 mm including the raised lettering. Does not include chamfers for sliding into tight leather key wallets. Matches Simao.
4mm Bore Keychain Table
A miniature four-legged table scaled down for pocket carry. It features a standard rectangular top and four corner legs, with an integrated mounting tab extending from the short edge. Fitment and Dimensions Keyring Bore: 4mm diameter hole, fits standard split rings and mini carabiners. Overall Size: 43mm long (including the tab), 25mm wide, and 18mm tall. Clearance: Prints as a single solid piece; no assembly required.
Keyring Loop Registration Plate
Registration plate tag, scaled for a standard keychain layout. Mating Surface: 5mm bore fits standard split rings or small wire carabiners. Geometry: 80x26mm overall footprint with a flat 2.4mm back to sit flush against other keys. Clearances: The border and text sit 1.2mm proud of the base plate, allowing for a mid-print filament swap if printed horizontally on a single-extruder machine.