80-95mm to 66mm Can Adapter
Created 1 months ago
Description
A drop-in adapter sleeve designed to secure slim 500ml energy cans within oversized vehicle cup holders. Three exterior leaf-spring fins flex to accommodate base diameters ranging from 80mm to 95mm, centering the inner cup and dampening vibration to prevent rattling. The base features a tapered leading edge for binding-free insertion.
Technical Specifications
- Inner Well: 66mm diameter, sized for standard 500ml slim cans.
- Outer Fitment: Expands to 97mm; compresses to fit 80mm–95mm automotive cup holders.
- Retention Mechanism: Three curved 1.2mm-thick leaf-spring fins.
- Recommended Material: PETG, ABS, or ASA for high-temperature resistance in vehicle interiors.
- Print Instructions: Prints upright without supports.
Images
More like this
Explore more in Automotive, RC & Hobby →
D-Shaft to Hex Motor Adapter
A rigid drive adapter connecting a standard D-shaft motor to a hexagonal RC wheel hub. The base features a keyed socket to prevent slip under torque, while the driven end seats into the tire's existing recess. Overall Length: 25 mm Motor Socket: 6 mm diameter with a 3 mm flat profile, 10 mm depth Wheel Drive: 5.2 mm flat-to-flat hexagonal peg, 10 mm length Base Diameter: 12 mm for structural wall thickness around the socket
5mm Hex to D-Shaft Adapter
Adapter coupler designed to bridge a D-shaft DC motor and a hex-hub wheel. Built to a total length of 30mm, featuring a dedicated socket for the motor shaft and a hexagonal drive peg for the wheel. Motor Socket: Sized for a D-shaft with a 3mm flat (assumes a standard 4mm overall shaft diameter). Depth allows for a 10mm long shaft. Wheel Drive: Hexagonal peg scaled to 4.8mm across flats to provide sliding clearance into a rigid 5mm hub. Clearances: Includes 0.2mm offsets on all critical mating surfaces for standard FDM printing tolerances.
Gateway Intake to Combustion Engine Adapter
Adapter connecting a 42.0 mm OD combustion engine fan spigot to a PK360 grill intake vent. Host mating: Snaps into the PK360 stadium-profile intake vent. Component mating: Accepts a 42.0 mm OD pipe (internal bore is 42.5 mm for friction fit). Clearance: Verify your fan outlet measures exactly 42.0 mm before printing.
Lego piece for wagon door runner with thinner teeth bit slightly smaller
Wagon door runner to replace 3 off 15208 bricks Version with slightly too large slope
0.355 to 0.370 Golf Ferrule
Custom transition ferrule designed to mate golf shafts with an adapting taper. Before printing, verify your shaft tip standard. This part spans from a 0.355-inch taper dimension to a 0.370-inch parallel dimension. Critical Measurements: Inner Bore (Bottom): 9.0 mm (0.355") Inner Bore (Top): 9.4 mm (0.370") Outer Diameter: 13.5 mm (0.530") constant Length: 22.0 mm (0.875") Does not fit standard parallel-only 0.370" shafts at the base without binding.
Custom 16T Mod 0.5 Gear
What it's for A custom 16-tooth spur gear designed for tight tolerances and specific meshing requirements. Built with a modified pressure angle for a sharper tooth profile, and zero standard clearance to strictly match the requested root and outer diameters. Dimensions Outer Diameter: 9.00 mm Root Diameter: 7.00 mm Bore Diameter: 1.55 mm Thickness: 2.00 mm Module: 0.5 (with 28° pressure angle) Print notes Given the small 1.55 mm bore and fine module 0.5 teeth, a resin printer or an FDM machine with a 0.2 mm nozzle and highly calibrated flow is recommended. If printing on standard 0.4 mm FDM, horizontal expansion (XY compensation) may be needed to keep the bore true to size.