Description
A white West Highland terrier figure sized for soft, squishy TPU printing. The coat is built from chunky curls, with a heavy fringe over the eyes and hair across the top and sides of the head.
- Short, stubby legs
- Floppy ears hanging down the sides of the head
- Curly coat on body, chest, haunches and head
- Bare face below the nose
- Dark nose and eyes, flat underside for stable printing
Print in TPU with low infill for a squishy feel.
Images
More like this
Explore more in Decor & Display →
Moonlit Ghost Chain Swing Display
A friendly sheet-wearing ghost sits on a chain swing hanging from the horn of a crescent moon, in the spirit of a Halloween nursery rhyme. His blue tennis shoes dangle below the sheet and his hands grip the chains above his head, the way a kid holds on mid-swing. Crescent moon with shallow craters Chain swing with a rounded seat Cut-out eyes and a recessed smile Flat rounded base keeps the whole scene standing upright Sand the edges before handing it to a child.
Christmas Tree Lantern for LED Tealight
A Christmas tree lantern that sits over a battery LED tealight, so the light stays hidden inside instead of glaring from a bare tealight on the table. The walls are perforated with rings of small round holes that throw dots of light, and the bottom is open so the LED can be placed or swapped without taking anything apart. Key numbers Height: about 135 mm including star Base diameter: 90 mm, open underneath (inner opening about 87 mm) Wall: 1.6 mm, three stacked tiers Perforations: 4.2 mm holes, staggered rings Star: separate colour, peg-mounted into the top tier Printing Print upright, open end down, no supports needed for the cone walls Green for the tree, gold or yellow for the star Use a 0.4 mm nozzle; a lighter or translucent filament glows more
Small City Model with Park and Trees
A 230 × 170 mm town plate laid out as a small city: a row of five tall buildings along the back, a main road with crosswalk, side buildings, houses, cars, streetlights and a park with a pond, crossing paths, a bench, people and many trees. All lettering has been removed. Base: 230 × 170 × 4 mm plate Park: lawn, pond, two crossing paths, 19 trees, bench City: buildings 14–34 mm tall with windows and doors Extras: streetlights, cars, people, crosswalk Print: no supports needed for most parts; trees are cones and print best with a slow top layer
Engraved Name Block with Ogee Edges
A solid 4 x 3.5 x 1 in block with "Francisco Suarez" indented into the 4 x 1 in front face. All edges carry a Roman ogee profile: a concave sweep flowing into a convex bead. Size: 101.6 x 88.9 x 25.4 mm Name indented 1.5 mm, centered on the front face Smooth S-curve edge profile on all twelve edges Flat base, prints without supports
2
A conical vase, 150 mm across the base, 200 mm across the top and 300 mm tall, with 10 mm walls and floor. Maple leaves cover the outside in staggered rows, 9 rows of 16. Remix hooks Leaf density: 16 leaves per row and 9 rows at 30 mm spacing. Fewer, larger leaves give a bolder look. Wall thickness: 10 mm. Drop it to 3–4 mm to save material, or keep it thick for stability. Taper: base radius 75 mm, top radius 100 mm. Swap them for a flared-in neck. Leaf relief: 3 mm deep. Use less for a subtle texture. Pairs with: a glass jar liner for fresh flowers, since the walls are not waterproofed by the print itself.
Eukalyptuskranz für 21-mm LED-Stabkerzen
Adventskranz-Grundform mit dichtem Eukalyptuslaub und vier integrierten Kerzenhaltern für LED-Stabkerzen mit 21 mm Durchmesser. Passung Kerzenbohrung: 22,6 mm Durchmesser, 20 mm tief, mit Einlauffase – passend für 21-mm-Stabkerzen. Vier Halter im Abstand von 90°. Kranz ca. 200 mm Außendurchmesser, ca. 45–50 mm hoch. Vor dem Druck prüfen Den tatsächlichen Kerzendurchmesser nachmessen; bei Kerzen über 22 mm sitzt die Bohrung zu knapp. Druck Blätter sind unter ca. 40–48° nach oben geneigt, der Ring hat eine ebene Unterseite – Druck ohne Stützen. Passt nicht für Kerzen mit Durchmesser unter ca. 20 mm (sie stehen locker).