Lotus Flame LED Tealight Holder
Created today
Description
A Diwali LED tealight holder: a pointed, flame-shaped white frame stands on a round base, with a red lotus panel set inside it. The lotus is cut clean through the panel, so the LED glow shows through from the front cup. Five red petals wrap the cup, and two large white petals sweep out to the sides. Designed for battery LED tealights only, never real flames.
Remix hooks
- Cup size: 41.6 mm bore, 20 mm deep, 47.6 mm outside. Change the bore for a different tealight brand. Open top, so the LED lifts straight out.
- Flame silhouette: one width function sets the outline (about 40 mm half-width, 136 mm tall, standing on a 5 mm, 85 mm base). Change the exponents for a slimmer or fuller flame.
- Lotus pattern: the cutouts are a short list of ellipses (centre petal 11 x 44 mm). Add a ring or swap the shapes, and keep a 2 mm or wider web between openings.
- Colour split: red panel and front petals, white everything else. The panel sits in a 1 mm slot with 0.1 mm clearance on each face, so it prints flat and drops in. Swap in blue for an accent.
- Pairs with: a flat LED tealight, or a second panel with a different motif.
Starting dimensions
- Height about 140 mm
- Width about 120 mm across the outer petals
- Depth about 85 mm, set by the base
- Frame 8 mm thick, panel 3.5 mm thick
Images
More like this
Explore more in Decor & Display →
Christmas Tree Lantern with LED Holder
What it's for A Christmas tree lantern with perforated walls that hides a 38 mm battery LED light. A removable twist-lock tray inside the base holds the light, so it stays in the tree when the tree is carried or moved. Dimensions Base diameter: 90 mm, open underneath Total height: about 140 mm including the star Wall thickness: 1.6 mm Light ring: 39.4 mm inside diameter, 6 mm tall Tray: 66 mm disc with three locking lugs Assembly Line the tray lugs up with the gaps between the three tabs inside the wall. Push the tray up past the tabs, turn it about 60°, and lower it onto the tabs. Place the light in the ring. Remix ideas Make the ring taller for a deeper hold. Add a thumb notch to the tray for easier twisting. Change the hole pattern for different light dots.
Lotus Stem Diya Stand
What it's for A diya stand shaped like a lotus on a stem. A low lotus bloom serves as the base, a slim stem rises from it, and an open lotus of petals cradles the diya cup at the top. There is no separate podium. Dimensions Base lotus spread: roughly 60 mm across Stem: about 25 mm of slender column with a decorative bead Diya seat: 40 mm diameter recess Overall height: about 48 mm Remix ideas Resize the seat for a larger or smaller diya. Add more petal layers for a fuller bloom. Lengthen the stem for a taller stand.
Ripple Dune Twist-Lock Lamp
A soft, dune-rippled shade sits on a rounded pedestal base, like a small sand-sculpture lamp. The two pieces lock together with a printed twist-lock joint, so no hardware is needed. A bulb holder pocket sits inside the shade, and the cable runs through the base. Design notes Three lugs on the base neck drop into slots in the shade, then a short twist locks them. The cable hole enters the rear of the base and rises through the neck into the bulb pocket. The 24 mm pocket suits a small E14-style lamp holder. Use a low-heat LED bulb. Prints as two parts, base flat on the bed and shade open end down.
2
A conical vase, 150 mm across the base, 200 mm across the top and 300 mm tall, with 10 mm walls and floor. Maple leaves cover the outside in staggered rows, 9 rows of 16. Remix hooks Leaf density: 16 leaves per row and 9 rows at 30 mm spacing. Fewer, larger leaves give a bolder look. Wall thickness: 10 mm. Drop it to 3–4 mm to save material, or keep it thick for stability. Taper: base radius 75 mm, top radius 100 mm. Swap them for a flared-in neck. Leaf relief: 3 mm deep. Use less for a subtle texture. Pairs with: a glass jar liner for fresh flowers, since the walls are not waterproofed by the print itself.
Eukalyptuskranz für 21-mm LED-Stabkerzen
Adventskranz-Grundform mit dichtem Eukalyptuslaub und vier integrierten Kerzenhaltern für LED-Stabkerzen mit 21 mm Durchmesser. Passung Kerzenbohrung: 22,6 mm Durchmesser, 20 mm tief, mit Einlauffase – passend für 21-mm-Stabkerzen. Vier Halter im Abstand von 90°. Kranz ca. 200 mm Außendurchmesser, ca. 45–50 mm hoch. Vor dem Druck prüfen Den tatsächlichen Kerzendurchmesser nachmessen; bei Kerzen über 22 mm sitzt die Bohrung zu knapp. Druck Blätter sind unter ca. 40–48° nach oben geneigt, der Ring hat eine ebene Unterseite – Druck ohne Stützen. Passt nicht für Kerzen mit Durchmesser unter ca. 20 mm (sie stehen locker).
Moonlit Ghost Chain Swing Display
A friendly sheet-wearing ghost sits on a chain swing hanging from the horn of a crescent moon, in the spirit of a Halloween nursery rhyme. His blue tennis shoes dangle below the sheet and his hands grip the chains above his head, the way a kid holds on mid-swing. Crescent moon with shallow craters Chain swing with a rounded seat Cut-out eyes and a recessed smile Flat rounded base keeps the whole scene standing upright Sand the edges before handing it to a child.