Drone Frame For 8mm Motors
Created today
Description
A quad frame for 8 mm motors with a 14 mm wide, lattice-cut camera mount on the top deck.
Fitment
- Motors: 8 mm, in 8.4 mm bore cups. Does not fit 7 mm or 11xx motors without resizing.
- Camera mount: 14 mm wide extender and slanted plate, with a single vertical wall at the low end and a 7 mm lens hole.
- Frame: 4 arms, 58 mm guard rings with two curved sticks each, raised deck, hollow pointed legs.
Check before printing
- Measure the camera body width. The 14 mm wall suits only nano-size FPV cameras.
Known limits
- No flight-controller holes in the deck.
- The camera has no retaining feature. Use a strap or glue.
Images
More like this
Explore more in Automotive, RC & Hobby →
Janome RE10B Hoop Frame
A stripped-down, standalone frame replica for the Janome RE10B embroidery hoop. This is purely the central retaining ring with all machine-mounting hardware, tabs, and locking screws removed, leaving a clean, continuous loop. Dimensions Inner Opening: 100 mm × 40 mm Outer Envelope: 112 mm × 52 mm Depth: 7 mm Verify the 100x40 mm inner bore before printing to ensure your fabric setup will fit correctly. The edges are filleted vertically to recreate the capsule-like profile of the original part.
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
Bay windows for shops
OO scale bay window body, 36 mm wide, 13 mm deep and 40 mm high, with 13 mm of brickwork at the base and three window openings above. Three open window frames print separately on the plate for painting and gluing into the openings. Scale: OO gauge (4 mm to 1 ft) Overall size: 36 × 13 × 40 mm Brickwork: 13 mm high, horizontal courses with staggered joints Front window: 24 mm wide opening; two angled side windows about 14.3 mm wide Frames: 1.6 mm thick with 1.6 mm borders and a through-opening Fit: frames sized with clearance to their openings Back: open, for gluing to a wall
Rear-Drive Uno Line Follower Chassis
A flat, no-fuss line-follower deck in the spirit of a bare-bones racing sled: one smooth plate, wheels tucked at the rear, and a sensor bracket reaching out front. Built around an Arduino Uno, with four solid standoffs matching the Uno R3 hole pattern. Design notes Plain flat baseplate with no fastener holes or slots Openings only for the two wheel cutouts and the sensor tray window N20 motor cradles at the rear, shaft notches kept Four solid Uno standoffs for a 68.6 × 53.3 mm board, long side across the chassis Front sensor bracket with a 126 × 26 mm board shelf
Oo scale buildings half relief roof with ridge tiles
Two tiled OO-scale roof slopes, two slated roof slopes, five brick chimneys and a downpipe, all laid out to fit a 256 × 256 mm bed in one plate. Remix hooks Layout: the four roofs sit side by side along X, with chimneys and the downpipe in the strip on the right. The whole set spans about 240 × 156 mm. Tiled roofs: 46 × 156 mm slab, 3 mm thick, 4.5 mm radius ridge tile wrapping 135°, half-round gutter with 2 mm opening and 0.8 mm walls, closed ends and a 2 mm outflow hole. Slated roofs: 46 × 130 mm, 30° pitch, 2.5 mm courses, 7 mm slates, no gutter. Chimneys: 7 × 7 mm, 16 mm tall, base cut at 30°, printed upside down. Change the height or the cut angle for other roofs. Downpipe: 2 mm × 110 mm solid rod. Lengthen it or add brackets. Pairs well with a printed wall or building shell that matches the 30° and 45° pitches.
square hitch
Pare-chocs avant 141 mm pour MN82 LC79 à l'échelle 1/12, avec un bull bar pleine largeur et des cages de protection devant les phares principaux. Largeur du pare-chocs : 141 mm, profondeur 14 mm, hauteur 16 mm (estimées) Bull bar : montants à ±40 mm et ±65 mm, traverse haute à 37 mm, traverse basse Cages de phares à ±55 mm, 16 mm de large et 14 mm de haut Ouvertures d'antibrouillard et creux central conservés, sans grilles Matériau conseillé : PETG ou nylon