Dosenhalter mit Stangenklemme, Salud Amigo
Created today
Description
Halter für eine schlanke 250-ml-Dose mit 56 mm Innendurchmesser und geschlossenem Boden. Auf der Seite gegenüber der Klemme ist der Schriftzug „Salud Amigo“ in einer Zeile 1 mm tief in die runde Außenwand eingraviert.
Die zweiteilige Klemme für eine 25-mm-Stange besteht aus einer fest angeformten Hälfte und einem separat gedruckten Gegenstück.
- Innendurchmesser 56 mm, Gesamthöhe 100 mm
- Gravur eingetieft, nicht erhaben
- Klemme für 25-mm-Stange, Gegenstück als eigenes Teil
- Durchgangslöcher für M5-Schrauben
- Für PLA oder PETG geeignet
Images
More like this
Explore more in Automotive, RC & Hobby →
Flat Snap-In Interior Trim Cover
A removable interior trim cover with a flat front surface, a stepped outline (107 mm wide at the top, 123 mm at the bottom, 180 mm tall) and a soft raised area at the upper left. A rear locating frame and eight ratcheting snap clips hold it in the opening without screws. Remix hooks Raised area height: 10 mm with a roughly 30 mm blend. Lower it for a subtler step, or delete it for a fully flat panel. Surface curvature: the panel is flat in both directions. A gentle crown can be added back by adding a term to the height function. Clip layout: four clips per side at 25, 65, 105 and 145 mm height, each with four ratchet teeth 3.5 mm apart. Change the tooth pitch to match the metal edge thickness. Stabilising grid: 20 mm pitch, 1.6 mm ribs, about 3.5 mm tall. Pitch and height are easy to adjust. Pairs with: fuzzy skin in the slicer for a textured plastic look, in PETG, ASA or ABS.
Kawasaki z1100 bar end mirror handle bar adaptors
A threaded adapter that steps an M18x1 fine-pitch external thread down to an M6x1 internal thread, made for fitting bar end mirrors to the handlebars of a Kawasaki Z1100. The stud is 16 mm tall with no flange, and a 10 mm hex socket in the base lets it be driven in with an Allen key. Remix hooks Hex socket size and depth: 10 mm across flats, 5 mm deep. A deeper socket (7 mm was the earlier value) grips a key better but leaves less solid material around the M6 thread. Change the across-flats value to match a different key. Overall height: 16 mm. Taller gives the mirror stem more thread to bite into; shorter reduces how far it protrudes from the bar end. Thread fit: both threads are modelled at nominal size. FDM usually needs 0.1–0.2 mm of adjustment on the M18x1 outside and the M6x1 inside, so print a short test ring first. Add a stop: there is no flange, so insertion depth is set by feel. A thin collar or a shoulder on the mating part would give a hard stop. Pairs with: a lock nut or thread-locking compound on the M6 side to keep a mirror from backing out under vibration. Starting dimensions External thread: M18, 1 mm pitch Internal thread: M6, 1 mm pitch, through the full height Height: 16 mm Socket: 10 mm hex, 5 mm deep Check the thread on your actual bar ends before relying on it. Print in a tough material such as PETG or ABS, since the part sees vibration and weather.
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
OO Gauge semi detached house stone v2
A semi-detached stone house pair in OO gauge, printed as separate pieces: front wall with quoins at the outer ends, mitred side walls, a one-piece roof, a floor piece, two chimneys, and separate window and door inserts. Four small locator rails now help position the side-wall tabs on the front wall. Remix hooks Tab locators: four U-shaped pieces, each 6.8 × 18.6 × 1.5 mm. Glue one against the inside of the front wall beside each side-wall tab. The 0.3 mm clearance around the 15 × 5 mm tab is the value to tune for your printer. Locator thickness: 1.5 mm now. Raise it for a firmer stop. Window and door inserts: 3 mm thick, 0.2 mm clearance per side. Pairs well with: a thin plasticard base or a printed street baseboard.
Line Follower Chassis, N20 Drive
What it's for A line-follower chassis plate with N20 motor cradles, an adjustable-height front sensor tray, an ESP32 mount, a battery holder, a driver mount, a rear caster tab and an LED hole. Dimensions Overall: about 130 × 198 mm, under 25 mm tall (the plate sits 8 mm off the ground). Motor cradles: 12.2 × 24.7 mm pocket for a 12 × 10 × 24.5 mm N20, with a shaft notch and two M2 holes each. Wheel cutouts: sized for 34 mm wheels with more than 2 mm clearance to the plate. Sensor tray: 126 × 26 mm board shelf, two vertical M3 slots in the riser for height adjustment. ESP32: four standoffs for a 48 × 26 mm board, plus two zip-tie slots. Battery: 68 × 18 × 19 mm pocket along the axle line, two strap slots. Driver: two zip-tie slots for a 21 × 18 mm module. LED: 5 mm hole near the rear edge. Wiring: two 10 mm slots between the motor mounts and the electronics. Remix ideas Add a cover clamp across each motor cradle using the M2 holes. Change the caster tab hole spacing for a different caster. Add a second sensor tray for a different board width.
Saipa Pride 111 Clock Bezel Phone Cradle
Preliminary replacement for the Saipa Pride 111 (2011 / 1390) dashboard clock bezel, with a landscape cradle for the Samsung Galaxy A54 5G. All bezel dimensions are placeholders and not taken from the car. Fit status Host: Saipa Pride 111 clock opening. Bezel size, spigot depth and clip positions are placeholders. Phone: Galaxy A54 5G, 158.2 × 76.7 × 8.2 mm, plus 3 mm case allowance and 1 mm clearance per side. Does not fit other Pride trims or other phones. Measure before printing Dash opening width, height, depth, corner radius and clip or screw positions. Notes The cradle is wider than the clock opening, so it projects forward of the dash. Open-top slide-in loading, side lips, a bottom ledge and a USB-C side slot. Tilt is 15° back. Check it against the dash and your sight line. Print in ASA or PC-CF. PETG softens in a hot parked car.